The large volumes of oily wastewater generated by various industries, such as oil and gas, food and beverage, and metal processing, need to be de-oiled prior to being discharged into the environment. Compared to conventional technologies such as dissolved air flotation (DAF), coagulation or solvent extraction, membrane filtration can treat oily wastewater of a much broader compositional range and still ensure high oil removals. In the present review, various aspects related to the practical implementation of membranes for the treatment of oily wastewater are summarized. First, sources and composition of oily wastewater, regulations that stipulate the extent of treatment needed before discharge, and the conventional technologies that enable such treatment are appraised. Second, commercially available membranes, membrane modules, operation modes and hybrids are overviewed, and their economics are discussed. Third, challenges associated with membrane filtration are examined, along with means to quantify and mitigate membrane fouling. Finally, perspectives on state-of-the-art techniques to facilitate better monitoring and control of such systems are briefly discussed.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1016/j.watres.2019.03.021 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Hydrophobic dual-polymer-reinforced graphene composite aerogel for efficient water-oil separation.
RSC Adv
January 2025
Hainan Provincial Key Laboratory of Natural Rubber Processing, Agricultural Products Processing Research Institute, Chinese Academy of Tropical Agricultural Sciences Zhanjiang 524001 P. R. China
Addressing the environmental challenges posed by oil spills and industrial wastewater is critical for sustainable development. Graphene aerogels demonstrate significant potential as highly efficient adsorbents due to their high specific surface area, excellent structural tunability and outstanding chemical stability. Among available fabrication methods, the hydrothermal self-assembly technique stands out for its low cost, high tunability and good scalability.
View Article and Find Full Text PDFHighly flexible free-standing bacterial cellulose-based filter membrane with tunable wettability for high-performance water purification.
Int J Biol Macromol
December 2024
Institute of Chemicobiology and Functional Materials, School of Chemical Engineering, Nanjing University of Science and Technology, 200 Xiao Ling Wei, Nanjing 210094, China. Electronic address:
Water purification has always been a critical yet challenging issue. In this study, an organic-inorganic composite membrane was developed using 2,2,6,6-tetramethylpiperidine-1-oxyl radical (TEMPO)-oxidized bacterial cellulose (BC) nanofibers and hydroxyapatite nanowires (HAPNW) with tunable wettability for advanced membrane separation applications. The resulting free-standing TEMPO-BC/HAPNW filter membrane exhibited strong mechanical strength, high flexibility, exceptional deformability, and a high pure water flux of up to 800 L·m·h due to its porous architecture and inherent hydrophilicity.
View Article and Find Full Text PDFAdvanced Low-Cost Natural Materials for High-Performance Oil-Water Filtration Membranes: Achievements, Challenges, and Future Directions.
Membranes (Basel)
December 2024
Department of Mechanical Engineering, Mount Vernon Nazarene University, 800 Martinsburg Rd, Mt Vernon, OH 43050, USA.
The development of affordable ceramic membranes is essential for reducing expenses and optimizing the treatment of oily wastewater. There is an urgent demand for membranes that are not only affordable and easy to operate but also stable and capable of managing high fluxes to address the increasing volumes of oily wastewater. The significant production demands associated with many commercially available ceramic membranes, primarily due to the use of specialised raw materials and intricate processing methods, limiting their suitability for many wastewater treatment applications.
View Article and Find Full Text PDFSolar driven enhanced adsorption of radioactive Cs and Sr from nuclear wastewater by chitosan-based aerogel embedded with prussian blue analog.
J Hazard Mater
December 2024
College of Materials Science and Chemical Engineering, Harbin Engineering University, Harbin 150001, China; Nanhai Institute of Harbin Engineering University, Sanya 572024, China. Electronic address:
The rational use of solar energy to achieve photothermal conversion is an attractive strategy to promote the efficient removal of radioactive Cs and Sr from nuclear wastewater. Herein, a photothermal adsorbent of composite aerogel with three-dimensional porous structure is fabricated by integrating prussian blue analogues (PBAs) and straw biochar into the chitosan (CS) and waste leather scrap hydrolysate (WLSH) aerogel matrix (CS/WLSH/C/PBAs). The local heating effect generated by CS/WLSH/C/PBAs aerogel induce to generate steam, accelerating the enrichment of Cs and Sr in the solution, which increase their interaction with the CS/WLSH/C/PBAs and improves their adsorption rates and capacities.
View Article and Find Full Text PDFEvaluating value-added biochemical and biodiesel production from Chlorococcum humicolo algal biomass in phycoremediation of textile dye effluents.
Bioresour Technol
December 2024
Department of Biotechnology, Sathyabama Institute of Science and Technology, Deemed to be University, Chennai 600 119, Tamil Nadu, India.
This study investigates the potentials of Chlorococcum humicolo algal biomass for the extraction of valuable biochemical and biodiesel production, with focus on the phycoremediation of textile dye effluents. The alga was cultivated in three media: CFTRI medium, combined dye effluent, and dye bath effluent in the laboratory. The highest cell count (254 × 10 cells/ml) and lowest oil content (16.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!