Global exponential increase in levels of Photovoltaic (PV) module waste is an increasing concern. The purpose of this study is to investigate if there is energy value in the polymers contained within first-generation crystalline silicon (c-Si) PV modules to help contribute positively to recycling rates and the circular economy. One such thermochemical conversion method that appeals to this application is pyrolysis. As c-Si PV modules are made up of glass, metal, semiconductor and polymer layers; pyrolysis has potential not to promote chemical oxidation of any of these layers to help aid delamination and subsequently, recovery. Herein, we analysed both used polymers taken from a deconstructed used PV module and virgin-grade polymers prior to manufacture to determine if any properties or thermal behaviours had changed. The calorific values of the used and virgin-grade Ethylene vinyl acetate (EVA) encapsulant were found to be high, unchanged and comparable to that of biodiesel at 39.51 and 39.87 MJ.Kg, respectively. This result signifies that there is energy value within used modules. As such, this study has assessed the pyrolysis behaviour of PV cells and has indicated the energy recovery potential within the used polymers found in c-Si PV modules.
Download full-text PDF |
Source |
|---|---|
| http://www.ncbi.nlm.nih.gov/pmc/articles/PMC6437152 | PMC |
| http://dx.doi.org/10.1038/s41598-019-41762-5 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Highly passivated TOPCon bottom cells for perovskite/silicon tandem solar cells.
Nat Commun
September 2024
Ningbo Institute of Materials Technology and Engineering, Chinese Academy of Sciences, Ningbo, Zhejiang, China.
Tunnel oxide passivated contact (TOPCon) silicon solar cells are rising as a competitive photovoltaic technology, seamlessly blending high efficiency with cost-effectiveness and mass production capabilities. However, the numerous defects from the fragile silicon oxide/c-Si interface and the low field-effect passivation due to the inadequate boron in-diffusion in p-type polycrystalline silicon (poly-Si) passivated contact reduce their open-circuit voltages (Vs), impeding their widespread application in the promising perovskite/silicon tandem solar cells (TSCs) that hold a potential to break 30% module efficiency. To address this, we have developed a highly passivated p-type TOPCon structure by optimizing the oxidation conditions, boron in-diffusion, and aluminium oxide hydrogenation, thus pronouncedly improving the implied V (iV) of symmetric samples with p-type TOPCon structures on both sides to 715 mV and the V of completed double-sided TOPCon bottom cells to 710 mV.
View Article and Find Full Text PDFAll-back-contact neutral-colored transparent crystalline silicon solar cells enabling seamless modularization.
Proc Natl Acad Sci U S A
August 2024
School of Energy and Chemical Engineering, Ulsan National Institute of Science and Technology, Ulsan 44919, Republic of Korea.
Transparent solar cells (TSCs) hold substantial potential as continuous energy generators, enabling their use in situations where conventional devices may not be feasible. However, research aimed at modularizing TSCs for the purpose of regulating the overall voltage and current they produce, a critical step toward practical application, is still in its nascent stages. In this study, we explored a custom-designed, all-back-contact (ABC) configuration, which situates all electrical contacts on the rear side, to create glass-like transparent crystalline silicon (Si) solar cells and seamless modules.
View Article and Find Full Text PDFAnalogical environmental cost assessment of silicon flows used in solar panels by the US and China.
Sci Rep
April 2024
Hydrometallurgy and Corrosion, Circular Raw Materials Hub, Department of Chemical and Metallurgical Engineering (CMET), School of Chemical Engineering, Aalto University, PO Box 16200, Espoo, Finland.
Article Synopsis
- Achieving carbon neutrality necessitates large-scale renewable energy technologies, like solar PV panels, but their environmental impacts, particularly related to silicon flows, are not well-studied.
- Using system dynamics modeling, this research evaluates the environmental costs associated with silicon production for PVs, focusing on the U.S. and China as the top manufacturers.
- It finds that while improvements have been made, China will face a 70% rise in energy and 69% increase in water use for silicon production by 2030, with significant emissions from cell and module manufacturing in both countries.
Crystalline Si Surface Passivation with Nafion for Bulk Defects Detection with Electron Paramagnetic Resonance.
ACS Appl Mater Interfaces
May 2024
National Renewable Energy Laboratory, Golden, Colorado 80401, United States.
Article Synopsis
- Effective surface passivation of monocrystalline silicon (c-Si) solar cells is essential for identifying and reducing bulk defects to improve efficiency.
- The study introduces Nafion, an organic copolymer, as a room-temperature passivation method for Czochralski (Cz) Si wafers, tested alongside traditional methods like AlO and liquid HF/HCl.
- Results indicate that Nafion offers similar or superior passivation effects at room temperature, maintaining quality for about 24 hours, making it a viable alternative for investigating bulk defects in c-Si solar technology.
Remanufacturing Perovskite Solar Cells and Modules-A Holistic Case Study.
ACS Sustain Resour Manag
March 2024
Fraunhofer Institute for Solar Energy Systems ISE, Heidenhofstr. 2, 79110 Freiburg, Germany.
While perovskite photovoltaic (PV) devices are on the verge of commercialization, promising methods to recycle or remanufacture fully encapsulated perovskite solar cells (PSCs) and modules are still missing. Through a detailed life-cycle assessment shown in this work, we identify that the majority of the greenhouse gas emissions can be reduced by re-using the glass substrate and parts of the PV cells. Based on these analytical findings, we develop a novel thermally assisted mechanochemical approach to remove the encapsulants, the electrode, and the perovskite absorber, allowing reuse of most of the device constituents for remanufacturing PSCs, which recovered nearly 90% of their initial performance.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!