Pb-PbOHCl Composite Nanowires Synthesized by Galvanic Deposition in Template.

J Nanosci Nanotechnol

Laboratorio di Chimica Fisica Applicata, Dipartimento dell'Innovazione Industriale e Digitale-Ingegneria Chimica Gestionale Informatica Meccanica, Università di Palermo, Viale delle Scienze - 90128 Palermo (Italy).

Published: August 2019

In this paper, we report a detailed study on the synthesis of composite nanowires of Pb-PbOHCl via galvanic deposition into the pores of a membrane acting as a template. PbOHCl deposition quantitatively occurs as the solution pH exceeds the value of about 4.12. Simultaneously, owing to the galvanic coupling, electro-deposition of lead occurs, so composite nanowires were formed. The role of different parameters controlling the kinetic evolution of the process, such as oxygen bubbling, solution pH, surface area and type of sacrificial anode were investigated one at a time. The results suggest that every modification accelerating the alkalization of the solution inside the template pores favors growth of composite nanowires richer in PbOHCl. Alumina and polycarbonate membranes were investigated as template, and the best results were obtained for polycarbonate membrane, which can be easily removed by dissolution in CHCl₃ avoiding the collapse and successive loss of the nanowires.

Download full-text PDF

Source
http://dx.doi.org/10.1166/jnn.2019.16362DOI Listing

Publication Analysis

Top Keywords

composite nanowires
16
galvanic deposition
8
nanowires
5
pb-pbohcl composite
4
nanowires synthesized
4
synthesized galvanic
4
template
4
deposition template
4
template paper
4
paper report
4

Similar Publications

The increasing reliance on electronic devices has created a pressing demand for high-performance and sustainable electromagnetic interference shielding materials. While conventional materials, such as metals and carbon-based composites, offer excellent shielding capabilities, they are hindered by high costs, environmental concerns, and limitations in scalability. Polysaccharide-based materials, including cellulose, chitosan, and alginate, represent a promising alternative due to their biodegradability, renewability, and versatility.

View Article and Find Full Text PDF

Developing a reliable procedure for the growth of III-V nanowires (NW) on silicon (Si) substrates remains a significant challenge, as current methods rely on trial-and-error approaches with varying interpretations of critical process steps such as sample preparation, Au-Si alloy formation in the growth reactor, and nanowire alignment. Addressing these challenges is essential for enabling high-performance electronic and optoelectronic devices that combine the superior properties of III-V NW semiconductors with the well-established Si-based technology. Combining conventional scalable growth methods, such as Metalorganic Chemical Vapor Deposition (MOCVD) with in situ characterization using Environmental Transmission Electron Microscopy (ETEM-MOCVD) enables a deeper understanding of the growth dynamics, if that knowledge is transferable to the scalable processes.

View Article and Find Full Text PDF

Mixed ion/electron-conducting rivets patterned Li metal anodes for high-performance Li metal batteries.

J Colloid Interface Sci

January 2025

Tianjin International Joint Research Centre of Surface Technology for Energy Storage Materials, College of Physics and Materials Science, Tianjin Normal University, Tianjin 300387 China. Electronic address:

Lithium (Li) metal is considered to be one of the most promising anodes for next-generation high-energy-density batteries owing to its high theoretical capacity and low redox potential. However, the practical application of Li metal anodes has been hindered by the unstable interface and the growth of Li dendrites. Herein, a highly stable surface-patterned Li metal anode has been developed, in which composite nanowires composed of lithium phosphide and copper nanoparticles are riveted within the regular grooves of the Li metal surface.

View Article and Find Full Text PDF

Modulating the Oxygen Evolution Reaction of Single-Crystal Cobalt Carbonate Hydroxide via Surface Fe Doping and Facet Dependence.

J Phys Chem Lett

January 2025

Graphene Composite Research Center, College of Chemistry and Environmental Engineering, Shenzhen University, Shenzhen 518060, P. R. China.

The oxygen evolution reaction (OER) is a critical half-reaction in water splitting and metal-air cells. The sensitivity of the OER to the composition and structure of the electrocatalyst presents a significant challenge in elucidating the structure-property relationship. In this study, highly stable single-crystal cobalt carbonate hydroxide [Co(OH)CO, CoCH] was used as a model to investigate the correlations among structure, composition, and reactivity.

View Article and Find Full Text PDF

Exploiting biomimetic perception of invisible spectra in flexible artificial human vision systems (HVSs) is crucial for real-time dynamic information processing. Nevertheless, the fast processing of motion objects in natural environments poses a challenge, necessitating that these artificial HVSs simultaneously have swift photoresponse and nonvolatile memory. Here, inspired by the human retina, we propose a flexible UV neuromorphic visual synaptic device (NeuVSD) based on GaO@GaN-composited nanowires for dynamic visual perception.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!