Phosphoric Acid Diethylmethylammonium Trifluoromethanesulfonate-Based Electrolytes for Nonhumidified Intermediate Temperature Fuel Cells.

ACS Appl Mater Interfaces

Department of Applied Chemistry for Environment, Graduate School of Urban Environmental Sciences , Tokyo Metropolitan University, 1-1 Minami-Ohsawa , Hachioji , 192-0397 Tokyo , Japan.

Published: April 2019

The present study reports a new series of electrolytes for nonhumidified intermediate temperature fuel cells (IT-FCs). This series of new mixed electrolytes, composed of phosphoric acid (PA) and diethylmethylammonium trifluoromethanesulfonate ([dema][TfO]), was designed as nonhumidified IT-FC electrolytes. The mixed electrolytes show a higher thermal stability than pure PA, which is dehydrated at ITs. The thermal stability of the mixed electrolytes could be explained by the interaction between the triflate group in [dema][TfO] and PA, as indicated by Fourier transform infrared and proton nuclear magnetic resonance (H NMR) spectroscopies. On the other hand, the ionic conductivity and proton transference number of the mixed electrolytes were similar to those of the pure PA. However, the oxygen reduction reaction (ORR) activity of a platinum catalyst is significantly enhanced in the mixed electrolytes, which was due to the several orders of magnitude increase in oxygen solubility by the addition of [dema][TfO] to PA. Specifically, for the equimolar fraction mixed electrolyte, the diffusion coefficient and the solubility of oxygen were ca. 1.47 × 10 cm s and ca. 1.28 mmol dm at 150 °C, respectively. The addition of [dema][TfO] to PA could significantly enhance the ORR activity. Therefore, the PA_[dema][TfO] mixed electrolyte can be one of the solutions to develop nonhumidified intermediate FC electrolytes.

Download full-text PDF

Source
http://dx.doi.org/10.1021/acsami.8b21231DOI Listing

Publication Analysis

Top Keywords

mixed electrolytes
20
nonhumidified intermediate
12
electrolytes
9
phosphoric acid
8
acid diethylmethylammonium
8
electrolytes nonhumidified
8
intermediate temperature
8
temperature fuel
8
fuel cells
8
thermal stability
8

Similar Publications

Co-Flocculation of Mixed-Sized Colloidal Particles in Aqueous Dispersions Under a DC Electric Field.

Materials (Basel)

December 2024

Department of Chemistry and Biomolecular Science, Faculty of Engineering, Gifu University, Gifu 501-1193, Japan.

When an electric field is applied to or removed from colloidal particle aqueous dispersions, a reversible increase in sedimentation velocity of the colloidal particles, referred to as the Electrically Induced Rapid Separation (ERS) effect, is observed. While electrophoresis and other interfacial electrokinetic phenomena under applied electric fields are well-studied, the phenomena of particle aggregation and re-dispersion caused by the application and removal of the field remain largely unexplored despite their significance. Experiments using mixed aqueous dispersions of poly (methyl methacrylate) (PMMA) particles of different sizes revealed that applying an electric field induced the formation of co-flocs involving both large and small particles, significantly enhancing the sedimentation velocity.

View Article and Find Full Text PDF

Titanium potassium oxalate had been mixed into the electrolyte to improve the anti-corrosion property of the micro arc oxidation coating on the surface of the aluminium alloy. The surface and cross-section of the coating at different titanium potassium oxalate concentrations had been observed by scanning electron microscopy, showing that when the titanium potassium oxalate concentration was 10 g/L, the coating compactness was better. Additionally, the element content of the coating had been studied by the energy dispersive spectrometer, and results proved that the coating consisted of Al, O, Ti, Si, and P.

View Article and Find Full Text PDF

Electron transfer in polysaccharide monooxygenase catalysis.

Proc Natl Acad Sci U S A

January 2025

California Institute for Quantitative Biosciences, University of California, Berkeley, CA 94720.

Polysaccharide monooxygenase (PMO) catalysis involves the chemically difficult hydroxylation of unactivated C-H bonds in carbohydrates. The reaction requires reducing equivalents and will utilize either oxygen or hydrogen peroxide as a cosubstrate. Two key mechanistic questions are addressed here: 1) How does the enzyme regulate the timely and tightly controlled electron delivery to the mononuclear copper active site, especially when bound substrate occludes the active site? and 2) How does this electron delivery differ when utilizing oxygen or hydrogen peroxide as a cosubstrate? Using a computational approach, potential paths of electron transfer (ET) to the active site copper ion were identified in a representative AA9 family PMO from (PMO9E).

View Article and Find Full Text PDF

Solid electrolytes (SEs) are crucial for advancing next-generation rechargeable battery technologies, but their commercial viability is partially limited by expensive precursors, unscalable synthesis, or low ionic conductivity. Lithium tetrahaloaluminates offer an economical option but exhibit low Li conductivities with high activation energy barriers. This study reports the synthesis of lithium aluminum chalcohalide (LiAlClS) using inexpensive precursors one-step mechanochemical milling.

View Article and Find Full Text PDF

Dipole Potential of Monolayers with Biologically Relevant Lipid Compositions.

Molecules

December 2024

Coimbra Chemistry Center, Institute of Molecular Sciences (CQC-IMS), University of Coimbra, 3004-535 Coimbra, Portugal.

The membrane dipole potential that arises from the interfacial water and constitutive dipolar groups of lipid molecules modulates the interaction of amphiphiles and proteins with membranes. Consequently, its determination for lipid mixtures resembling the existing diversity in biological membranes is very relevant. In this work, the dipole potentials of monolayers, formed at the air-water interface, from pure or mixed lipids (1-palmitoyl-2-oleoyl--glycero-3-phosphocholine (POPC), 1-palmitoyl-2-oleoyl--glycero-3-phosphoethanolamine (POPE), 1-palmitoyl-2-oleoyl--glycero-3-phosphatidyserine (POPS), sphingomyelin (SpM) and cholesterol) were measured and correlated with the mean area per lipid.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!