An interim restoration is often used to assess the patient's functional and esthetic needs for implant-supported complete-arch fixed prostheses. A digital protocol for accurately transferring information from the existing dentition to the interim restoration is required. The purpose of this clinical report was to describe a digital workflow to fabricate an interim fixed restoration by using the vertical dimension of occlusion and occlusal relationship from the original dentition to provide an accurate, efficient, and predictable computer-aided design and computer-aided manufacturing (CAD-CAM) interim complete-arch implant-supported restoration.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1016/j.prosdent.2018.09.024 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
A Digital Approach for a Complete Rehabilitation with Fixed and Removable Prostheses: A Technical Procedure.
Dent J (Basel)
December 2024
Department of Prosthodontics, University of Rennes, 35043 Rennes, France.
The present article describes a step-by-step maximally digitalized workflow protocol with computer-aided design and computer-aided manufacturing (CAD/CAM) in partial-arch edentulous patients rehabilitated with fixed dental prostheses and removable partial dentures (FDPs and RPDs). Facial digitalization, intraoral scans, and functional mandibular movement recordings were used to create a 4D virtual patient on commercially available CAD software. The fixed components including post-and-cores, both metal-ceramic with extra-coronal attachment and monolithic zirconia crowns, and the RPDs were manufactured by computer numerical controlled direct milling.
View Article and Find Full Text PDFComparative In Vitro Analysis of Fracture Toughness and Flexural Strength in Interim Fixed Partial Dentures Reinforced With Various Nanofibers.
Cureus
December 2024
Prosthodontics and Crown and Bridge, The Oxford Dental College, Bengaluru, IND.
Aim To evaluate and compare the fracture toughness and flexural strength of interim fixed partial dentures reinforced with carbon, glass, and Kevlar nanofibers. Materials and methods This study explored the effect of reinforcing poly methyl methacrylate with carbon, glass, and Kevlar fibers on its fracture toughness and flexural strength. A total of 120 samples were prepared, divided into two groups of 60 samples each, with one group tested for fracture toughness and the other for flexural strength.
View Article and Find Full Text PDFA technique to enhance the gingival esthetics of a prototype complete arch fixed implant-supported prototype prosthesis using a 3D printed gingival veneer.
J Prosthet Dent
December 2024
Clinical Professor and Program Director, University of Connecticut Health Center, Farmington, Conn.; and Private practice, Glastonbury, Conn. Electronic address:
An important step in the workflow for a complete arch fixed implant-supported prosthesis is the fabrication of a prototype resin prosthesis to allow the patient to visualize the definitive treatment outcome and also to use as an interim prosthesis. Producing a prototype prosthesis with the natural appearance of the gingival color and contour has been challenging. Current methods include painted stains, manually applied pink composite resin or autopolymerizing acrylic resin, and multicolored resin blocks, but these are all relatively expensive, have less than optimal esthetics, and are labor-intensive and time-consuming.
View Article and Find Full Text PDFInternal and marginal fits of 3D-printed provisional prostheses: comparative effect of different printing parameters.
Front Oral Health
December 2024
Department of Substitutive Dental Sciences, College of Dentistry, Imam Abdulrahman Bin Faisal University, Dammam, Saudi Arabia.
Objectives: The influence of printing parameters on the marginal and internal fit of three-dimensional (3D) printed interim fixed partial dentures (IFPDs) has been understudied. This investigation sought to elucidate the impact of printing orientation and post-curing time on these critical factors.
Methods: A total of 260 3-Unit IFDPs were printed using two different resins (130/NextDent C&B MFH and 130/ASIGA DentaTOOTH).
Visual Improvement With Wavefront-Guided Scleral Lenses for Irregular Corneal Astigmatism.
Eye Contact Lens
February 2025
Cornea and Laser Eye Institute-CLEI Center for Keratoconus (J.D.G., B.S., T.P., C.E., P.S.H., S.A.G.), Teaneck, NJ; Department of Ophthalmology (J.D.G., D.K., P.S.H., S.A.G.), Rutgers-New Jersey Medical School, Newark, NJ; TX; OVITZ Corporation (N.B., J.W.), Rochester, NY; College of Optometry (G.Y.), University of Houston, Houston, TX.
Purpose: To report interim results of a single center, randomized, double-blind, crossover-controlled clinical trial comparing wavefront-guided (wfg) scleral lenses (SLs) to traditional scleral lenses (tSLs) for patients with a history of irregular corneal astigmatism (ICA).
Methods: Thirty-one ICA eyes of 18 participants were reviewed, 23 with keratoconus, six postcorneal refractive ectasia, and two postpenetrating keratoplasty. Patients with corneal or lens opacities were not excluded from participating.
Want AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!