Corrosion damage to the aircraft structure can significantly reduce the safety performance and endanger flight safety. Especially when the corrosion occurs in a stress concentration region, such as hole edges, it can easily threaten the entire structure. In this paper, an on-line imaging qualitative monitoring algorithm based on piezoelectric sensors is proposed for detecting hole edge corrosion damage of porous aluminum alloy structures. The normalized amplitude is used to characterize the correlation between the initial Lamb wave signal and the damage signal, which is as an image reconstruction parameter in the algebraic iterative probability reconstruction algorithm. Moreover, a homogenization algorithm is proposed to process the reconstruction results. The experimental results of single hole and double hole corrosion for porous aluminum alloy plate show that the method can effectively achieve the location and quantification of corrosion damage to one and two holes of the porous structure.
Download full-text PDF |
Source |
|---|---|
| http://www.ncbi.nlm.nih.gov/pmc/articles/PMC6427764 | PMC |
| http://dx.doi.org/10.3390/s19051106 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Adsorption and immobilization of phosphorus in eutrophic lake water and sediments by a novel red soil based porous aerogel.
Water Res
December 2024
Key Laboratory of Poyang Lake Environment and Resource Utilization, Engineering Research Center of Watershed Carbon Neutralization, Ministry of Education, School of Resource and Environment, Nanchang University, Nanchang 330031, China. Electronic address:
To effectively mitigate global eutrophication in lakes, regulating sedimentary phosphorus release remains a primary strategy. Enhancing the adsorption and stabilization performance of passivating agents is integral to addressing endogenous phosphorus pollution in aquatic systems. This study presents a novel aerogel with a high specific surface area (663.
View Article and Find Full Text PDFThis paper explores the process of forming arrays of vertically oriented carbon nanotubes (CNTs) localized on metal electrodes using thin porous anodic alumina (PAA) on a solid substrate. On a silicon substrate, a titanium film served as the electrode layer, and an aluminium film served as the base layer in the initial film structure. A PAA template was formed from the Al film using two-step electrochemical anodizing.
View Article and Find Full Text PDFCopper catalyzed selective methane oxidation to acetic acid using O.
Chem Sci
January 2025
Department of Chemistry, Indian Institute of Technology Hauz Khas Delhi New Delhi 110016 India
The direct transformation of methane into C oxygenates such as acetic acid selectively using molecular oxygen (O) is a significant challenge due to the chemical inertness of methane, the difficulty of methane C-H bond activation/C-C bond coupling and the thermodynamically favored over-oxidation. In this study, we have successfully developed a porous aluminium metal-organic framework (MOF)-supported single-site mono-copper(ii) hydroxyl catalyst [MIL-53(Al)-Cu(OH)], which is efficient in directly oxidizing methane to acetic acid in water at 175 °C with a remarkable selectivity using only O. This heterogeneous catalyst achieved an exceptional acetic acid productivity of 11 796 mmol mol h in 9.
View Article and Find Full Text PDFTungsten Carbide Embedded in a Porous Carbon Nanofiber Sandwich Structure Electrode: A Strategy to Improve the Performance of Lithium-Sulfur Batteries.
Langmuir
January 2025
College of Materials and Metallurgy, Guizhou University, Guiyang 550025, China.
Lithium-sulfur (Li-S) batteries hold significant promise due to high energy density, cost-effectiveness, and ecological sustainability, but their practical applications are constrained by suboptimal electrochemical performance and the detrimental shuttle effect. Herein, a porous, sandwich-structured composite was developed to function as a freestanding cathode designed for Li-S batteries without aluminum foil. Porous carbon nanofibers (PCNF) were employed as the conductive matrix for sulfur, with tungsten carbide (WC) being incorporated to furnish abundant active sites for polysulfide adsorption.
View Article and Find Full Text PDFPhysico-Chemical Properties of Granular Sorbents Based on Natural Bentonite Modified by Polyhydroxocations of Aluminum and Iron (III) by Co-Precipitation.
Molecules
January 2025
Department of General and Biological Chemistry, Astana Medical University, 010000 Astana, Kazakhstan.
The physicochemical and adsorption properties of granular sorbents based on natural bentonite and modified sorbents based on it have been studied. It was found that modification of natural bentonite with iron (III) polyhydroxocations (mod. 1_Fe_5 GA) and aluminum (III) (mod.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!