It has been demonstrated that optical spectroscopy is a powerful tool for the quantitative monitoring of the main chemical components in food. However, portable spectrometer for on-site food quality assessment has rarely been reported. Here, a low-cost and portable hyperspectral scanner is developed. Utilizing this hyperspectral scanner by handheld push-broom scanning, reflectance spectra of meat samples can be obtained non-invasively and rapidly. Support vector regression (SVR) model is used to predict the pH value. The prediction accuracy rate of the model is close to 90%, and the coefficient of determination is about 0.93, which shows the feasibility of this system in on-site monitoring pH of meat.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1016/j.meatsci.2019.02.017 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Colorimetric Evaluation of a Reintegration via Spectral Imaging-Case Study: Nasrid Tiling Panel from the Alhambra of Granada (Spain).
Sensors (Basel)
June 2024
Departamento de Pintura, Universidad de Granada, 18071 Granada, Spain.
Color reintegration is a restoration treatment that involves applying paint or colored plaster to an object of cultural heritage to facilitate its perception and understanding. This study examines the impact of lighting on the visual appearance of one such restored piece: a tiled skirting panel from the Nasrid period (1238-1492), permanently on display at the Museum of the Alhambra (Spain). Spectral images in the range of 380-1080 nm were obtained using a hyperspectral image scanner.
View Article and Find Full Text PDFHyperspectral cameras face challenging spatial-spectral resolution trade-offs and are more affected by shot noise than RGB photos taken over the same total exposure time. Here, we present a colorization algorithm to reconstruct hyperspectral images from a grayscale guide image and spatially sparse spectral clues. We demonstrate that our algorithm generalizes to varying spectral dimensions for hyperspectral images, and show that colorizing in a low-rank space reduces compute time and the impact of shot noise.
View Article and Find Full Text PDFMIC: Microwave Imaging Curtain for Dynamic and Automatic Detection of Weapons and Explosive Belts.
Sensors (Basel)
November 2023
Fraunhofer SCAI, D-53757 Sankt Augustin, Germany.
DEXTER (detection of explosives and firearms to counter terrorism) is a project funded by NATO's Science for Peace and Security (SPS) program with the goal of developing an integrated system capable of remotely and accurately detecting explosives and firearms in public places without impeding the flow of pedestrians. While body scanner systems in secure areas of public places are becoming more and more efficient, the attack at Brussels airport on 22 March 2016, upstream of these systems, in the middle of the crowd of passengers, demonstrated the lack of discreet and real-time security against threats of mass terrorism. The NATO-SPS international and multi-year DEXTER project aims to provide new technical and strategic solutions to fill this gap.
View Article and Find Full Text PDFTerahertz Constant Velocity Flying Spot for 3D Tomographic Imaging.
J Imaging
May 2023
EPSYL-Alcen, Esplanade des Arts et Métiers, CEDEX, 33405 Talence, France.
This work reports on a terahertz tomography technique using constant velocity flying spot scanning as illumination. This technique is essentially based on the combination of a hyperspectral thermoconverter and an infrared camera used as a sensor, a source of terahertz radiation held on a translation scanner, and a vial of hydroalcoholic gel used as a sample and mounted on a rotating stage for the measurement of its absorbance at several angular positions. From the projections made in 2.
View Article and Find Full Text PDF"Canopy fingerprints" for characterizing three-dimensional point cloud data of soybean canopies.
Front Plant Sci
March 2023
Department of Mechanical Engineering, Iowa State University, Ames, IA, United States.
Advances in imaging hardware allow high throughput capture of the detailed three-dimensional (3D) structure of plant canopies. The point cloud data is typically post-processed to extract coarse-scale geometric features (like volume, surface area, height, etc.) for downstream analysis.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!