Efficient Perovskite Solar Cells Prepared by Hot Air Blowing to Ultrasonic Spraying in Ambient Air.

ACS Appl Mater Interfaces

Department of Electronic Science and Technology, College of Electronic Information and Optical Engineering , Nankai University, Tianjin 300350 , China.

Published: March 2019

Substrate heating is the most common method for controlling crystallization during spray coating. However, due to poor controllability during substrate heating, the sprayed films have variable thicknesses and rich pores, which limit the efficiency of the device. Here, hot air blowing was applied to spray coating to promote the crystallization of perovskite films under ambient conditions. Upon employing a hot air blowing method that stimulated uniformly distributed nuclei growth, the pinhole-free and thickness-controllable perovskite film was prepared. This enabled more reproducible high-quality perovskite films to achieve a power conversion efficiency of 13.5% and obtain a stabilized power output of >12% in ambient conditions.

Download full-text PDF

Source
http://dx.doi.org/10.1021/acsami.9b01843DOI Listing

Publication Analysis

Top Keywords

hot air
12
air blowing
12
substrate heating
8
spray coating
8
perovskite films
8
ambient conditions
8
efficient perovskite
4
perovskite solar
4
solar cells
4
cells prepared
4

Similar Publications

Using Microalgae as a Good Motivator of Ossimi Lamb's Health and Growth.

J Anim Physiol Anim Nutr (Berl)

January 2025

Botany Department, Faculty of Science, Fayoum University, Fayoum, Egypt.

In tropical and subtropical countries like Egypt, sheep breeding faces environmental thermal stress, especially during the summer when air temperature and humidity are very high. Using Microalgae as an alternative feedstuff can significantly improve sheep growth, health and oxidative status. Therefore, this study aimed to evaluate the effect of consuming two different species of microalgae: Spirulina platensis (SP) and Chlorella vulgaris (C.

View Article and Find Full Text PDF

Effect of air temperature in indoor transition spaces on the thermal response of occupant during summer.

Sci Rep

January 2025

Innovation Institute for Sustainable Maritime Architecture Research and Technology, Qingdao University of Technology, Qingdao, 266033, People's Republic of China.

During the hot summer months, the significant temperature disparity between outdoor and indoor air-conditioned spaces can lead to thermal discomfort and pose a potential health risk. Transition areas such as corridors and elevator lobbies, serving as intermediary zones connecting indoors and outdoors, have been found effective in mitigating this thermal discomfort. In this study, three different temperatures (25 °C-case 1, 27 °C-case 2, and 29 °C-case 3) were employed to investigate the dynamic physiological regulation and thermal perception response of individuals when transitioning from an outdoor environment into an indoor neutral room through a transition space.

View Article and Find Full Text PDF

The impacts of climate change on human health are often underestimated or perceived to be in a distant future. Here, we present the projected impacts of climate change in the context of COVID-19, a recent human health catastrophe. We compared projected heat mortality with COVID-19 deaths in 38 cities worldwide and found that in half of these cities, heat-related deaths could exceed annual COVID-19 deaths in less than ten years (at + 3.

View Article and Find Full Text PDF

Avocados are among the most well-known nutrient-rich fruits worldwide. However, there is a high production of by-product waste, mainly avocado seeds. Avocado seeds can be used in many functional food and non-food applications, due to their nutritional and health-promoting properties.

View Article and Find Full Text PDF

The mechanisms of thermal processing techniques on modifying structural, functional and flour-processing properties of whole-grain highland barley.

Food Chem

December 2024

Glycomics and Glycan Bioengineering Research Center, College of Food Science &Technology, Nanjing Agricultural University, Nanjing 210095, PR China. Electronic address:

The mechanisms underlying three thermal processing methods, namely hot-air drying, microwave irradiation, and heat fluidization, were systematically investigated to evaluate their effects on the structural, functional, and flour-processing properties of whole-grain highland barley. Starch granules were partially damaged when treated with hot-air drying and microwave irradiation. However, these granules were predominantly aggregated or encapsulated in proteins following heat fluidization.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!