We report the design, fabrication and experimental investigation of a spectrally wide-band terahertz spatial light modulator (THz-SLM) based on an array of 768 actuatable mirrors with each having a length of 220 μm and a width of 100 μm. A mirror length of several hundred micrometers is required to reduce diffraction from individual mirrors at terahertz frequencies and to increase the pixel-to-pixel modulation contrast of the THz-SLM. By means of spatially selective actuation, we used the mirror array as reconfigurable grating to spatially modulate terahertz waves in a frequency range from 0.97 THz to 2.28 THz. Over the entire frequency band, the modulation contrast was higher than 50% with a peak modulation contrast of 87% at 1.38 THz. For spatial light modulation, almost arbitrary spatial pixel sizes can be realized by grouping of mirrors that are collectively switched as a pixel. For fabrication of the actuatable mirrors, we exploited the intrinsic residual stress in chrome-copper-chrome multi-layers that forces the mirrors into an upstanding position at an inclination angle of 35°. By applying a bias voltage of 37 V, the mirrors were pulled down to the substrate. By hysteretic switching, we were able to spatially modulate terahertz radiation at arbitrary pixel modulation patterns.
Download full-text PDF |
Source |
---|---|
http://www.ncbi.nlm.nih.gov/pmc/articles/PMC6385255 | PMC |
http://dx.doi.org/10.1038/s41598-019-39152-y | DOI Listing |
Sci Adv
January 2025
Exploratory Research Center on Life and Living Systems, National Institutes of Natural Sciences, Okazaki, Japan.
Life on the nanoscale has been made accessible in recent decades by the development of fast and noninvasive techniques. High-speed atomic force microscopy (HS-AFM) is one such technique that shed light on single protein dynamics. Extending HS-AFM to effortlessly incorporate mechanical property mapping while maintaining fast imaging speed allows a look deeper than topography and reveal details of nanoscale mechanisms that govern life.
View Article and Find Full Text PDFSci Adv
January 2025
State Key Lab of Advanced Optical Communication Systems and Networks, Shanghai Jiao Tong University, Shanghai 200240, China.
Holography is capable of rendering three-dimensional scenes with full-depth control and delivering transformative experiences across numerous domains, including virtual and augmented reality, education, and communication. However, traditional holography presents 3D scenes with unnatural defocus and severe speckles due to the limited space bandwidth product of the spatial light modulator (SLM). Here, we introduce Motion Hologram, a holographic technique that accurately portrays photorealistic and speckle-free 3D scenes.
View Article and Find Full Text PDFPhys Rev Lett
December 2024
Technion, Department of Electrical and Computer Engineering, Haifa 32000, Israel.
We present the concept of time-domain bound states in continuum. We show that a rapid judiciously designed temporal modulation of the refractive index in a spatially homogenous medium gives rise to a bound state in time, embedded in a continuum of wave numbers. Mathematically, these bound states in the continuum are closed form solutions of the Maxwell equations in time and one-dimensional space.
View Article and Find Full Text PDFRev Sci Instrum
January 2025
Max-Planck-Institut für Plasmaphysik, Garching 85748, Germany.
This article presents an experimental setup capable of providing high spatial and temporal resolution measurements of neutral gas puff injection using a glow discharge to excite the neutral gas and an ultra-high-speed camera to record the emitted light. Using the proposed setup, the shape and propagation velocity of a thermal deuterium gas puff at 1 bar have been measured. The cloud has a conical shape and a propagation velocity of vprop = 1870 ± 270 m/s.
View Article and Find Full Text PDFMater Horiz
January 2025
School of Chemistry, UNSW Sydney, Sydney, NSW 2052, Australia.
Patterning soft materials with cell adhesion motifs can be used to emulate the structures found in natural tissues. While patterning in tissue is driven by cellular assembly, patterning soft materials in the laboratory most often involves light-mediated chemical reactions to spatially control the presentation of cell binding sites. Here we present hydrogels that are formed with two responsive crosslinkers-an anthracene-maleimide adduct and a disulfide linkage-thereby allowing simultaneous or sequential patterning using force and UV light.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!