The defect processes of oxides such as self-diffusion impact their performance in electrochemical devices such as batteries and solid oxide fuel cells. The performance of lithium ion batteries can be improved by increasing the Li-ion diffusion. In that respect LiNbO is identified as a positive electrode material for rechargeable lithium ion batteries. Here, we employ static atomistic scale simulations to examine the defect properties, doping behaviour and lithium ion migration paths in LiNbO. The present calculations show a correct reproduction of experimentally observed crystal structure of LiNbO. The Li-Nb anti-site defect is found to be the dominant intrinsic defect process suggesting that a small concentration of Li on Nb sites and Nb on Li sites is present. Vacancy assisted long range lithium diffusion paths were examined and our calculations reveal that the lowest activation energy (1.13 eV) migration path is two dimensional forming a zig-zag shape. Subvalent doping by Ge on the Nb site is thermodynamically favourable process and a potential strategy to incorporate extra Li in the form of Li interstitial in LiNbO. The results presented herein can motivate further experimental work for the development of LiNbO based batteries.
Download full-text PDF |
Source |
---|---|
http://www.ncbi.nlm.nih.gov/pmc/articles/PMC6379435 | PMC |
http://dx.doi.org/10.1038/s41598-018-37466-x | DOI Listing |
Proc Natl Acad Sci U S A
January 2025
Department of Physics and Astronomy, University of California, Irvine, CA 92697.
Understanding topological defects-controlled structural degradation of layered oxides-a key cathode material for high-performance lithium-ion batteries-plays a critical role in developing next-generation cathode materials. Here, by constructing a nanobattery in an electron microscope enabling atomic-scale monitoring of electrochemcial reactions, we captured the electrochemically driven atomistic dynamics and evolution of dislocations-a most important topological defect in material. We deciphered how dislocations nucleate, move, and annihilate within layered cathodes at the atomic scale.
View Article and Find Full Text PDFProc Natl Acad Sci U S A
January 2025
Beijing Key Laboratory of Environmental Science and Engineering, School of Materials Science & Engineering, Beijing Institute of Technology, Beijing 100081, China.
Lithium-ion batteries (LIBs) have become advanced energy storage technologies; however, specific capacity remains limited by the active materials in cathodes. Here, we report Li-LiNO batteries (LNBs) where LiNO in electrolyte serves as both active materials and ion conductor at room temperature. LNBs operate on a highly reversible redox between NO and NO, which results in an impressive areal capacity of 19 mAh cm at a plateau voltage of 1.
View Article and Find Full Text PDFDalton Trans
January 2025
State Key Laboratory of Coordination Chemistry, School of Chemistry and Chemical Engineering, Nanjing University, Nanjing, 210023, China.
Silicon-based anode materials experience significant volume changes and low conductivity during the lithiation process, which severely hinders their successful application in lithium-ion batteries. Reducing the size of silicon particles and effectively combining them with carbon-based materials are considered the main strategies to enhance the lithium-ion storage performance of silicon-based anodes. In this study, we employed a "bottom-up" strategy to synthesize Si@C anode materials by cross-linking octa-aminopropyl polyhedral oligomeric silsesquioxane (NH-POSS) with terephthalaldehyde and subsequent high-temperature treatment and low-temperature liquid reduction.
View Article and Find Full Text PDFChem Commun (Camb)
January 2025
College of Chemistry, Chemical Engineering and Materials Science, Soochow University, Suzhou 215123, P. R. China.
Electron donor tetrathiafulvalene (TTF) and electron acceptor naphthalene diimide (NDI) derivatives were used to synthesize a 3D Zn-TTF/NDI-MOF. Multiple redox active sites and charge transfer endow the pristine MOF anode with excellent rate behavior and long term cycling performance (with an average specific capacity of 956 mA h g at 1 A g over 600 cycles). This study highlights the great potential of elaborately-designed MOFs for developing efficient anode materials.
View Article and Find Full Text PDFMacromol Rapid Commun
January 2025
Institut für Chemie, Technische Universität Chemnitz, Straße der Nationen 62, 09111, Chemnitz, Germany.
Aromatic diimides such as naphthalene diimide (NDI) and pyromellitic diimide (MDI) are important building blocks for organic electrode materials. They feature a two-electron redox mechanism that allows for energy storage. Due to the smaller size of MDI compared to NDI its theoretical capacity is higher.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!