Evaluating the ability of standardised leaching tests to predict metal(loid) leaching from intact soil columns using size-based elemental fractionation.

Laboratory-based leaching tests are frequently used for in situ risk assessments of contaminant leaching to groundwater and surface waters. This study evaluated the ability of three standardised leaching tests to assess leaching of lead (Pb), zinc (Zn), arsenic (As) and antimony (Sb) from four intact soil profiles, by considering particulate (0.45-8 μm; percolation test), colloidal (10 kDa-0.45 μm) and truly dissolved (<10 kDa) fractions of these elements. Deionised water was used as the percolation test leachant, while either deionised water or 1 mM CaCl was used in batch tests. Data from an irrigation experiment were used as reference. The results indicated that in percolation tests, leachate should be collected at a liquid:solid ratio (L/S) range of 2-10, instead of 0-0.5 or 0.5-2. Even at L/S = 2-10, the percolation test overestimated total Pb concentration, mainly because of greater mobilisation of particle-bound Pb, but appeared suitable for categorising soils into high/low risk with respect to mobilisation of particulate and colloidal contaminants. The batch test performed better with CaCl than with deionised water when standard membrane filtration (0.45 μm) was used, as the high Ca concentration reduced colloidal mobilisation, avoiding overestimation of concentrations of elements such as Pb. However, the higher Ca concentration and lower pH could result in overestimated concentrations of weakly sorbed elements, e.g. Zn.