Statement Of Problem: Veneer chipping and crown decementation are the most frequent failures in restorations using zirconia as an infrastructure. Increasing the roughness of the zirconia surface has been suggested to address this problem.
Purpose: The purpose of this systematic review and meta-analysis was to evaluate yttria-stabilized tetragonal zirconia polycrystal surface roughness, produced with aluminum oxide airborne-particle abrasion and the erbium yttrium aluminum garnet (YAG), neodymium-doped YAG, or CO lasers.
Material And Methods: This study was based on the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) checklist. The review identified relevant studies through December 2017 with no limit on the publication year in the search databases: Web of Science, Scopus, and MEDLINE via PubMed. The selected studies were submitted to a risk of bias assessment. The means and standard deviations of roughness were evaluated for the meta-analysis using Review Manager software.
Results: The 17 studies that met all inclusion criteria presented a medium risk of bias. All the treatment methods tested were able to create a roughness on the yttria-stabilized tetragonal zirconia polycrystal surface. The I test values presented a high heterogeneity among the studies.
Conclusions: The presintered specimens submitted to airborne-particle abrasion had higher surface roughness compared with abrasion after the sintering process. Irradiation with the neodymium-doped YAG and CO lasers was destructive to the zirconia surfaces. The erbium laser used with lower energy intensity appears to be a promising method for surface treatment.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1016/j.prosdent.2018.07.001 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Fabrication of photo-responsive self-deicing surface with micro-nano rough structures on fabrics.
J Colloid Interface Sci
December 2024
Key Laboratory of Advanced Textile Materials and Manufacturing Technology, Ministry of Education, Zhejiang Sci-Tech University, Hangzhou, Zhejiang 310018, PR China; Key Laboratory of Green Cleaning Technology & Detergent of Zhejiang Province, Lishui, Zhejiang 323000, PR China; Zhejiang Provincial Innovation Center of Advanced Textile Technology, Shaoxing, Zhejiang 312000, PR China.
Photothermal superhydrophobic treatment is an effective anti-icing and de-icing method, avoiding damage to equipment caused by ice accumulation in winter. However, the traditional photothermal materials were expensive and the photothermal conversion coatings are hard to remove when unnecessary. Herein, three biochar microspheres with solid, hollow, and flower-like structures (SBMs, HBMs, FBMs) were fabricated to construct photothermal superhydrophobic coatings on the polyester fabric (PET), respectively.
View Article and Find Full Text PDFBeverage-Induced Surface Changes in Biomimetic Dental Resin Composite: AFM and Bacterial Analysis.
Eur J Dent
December 2024
Department of Conservative Dentistry, Faculty of Dentistry, October University for Modern Sciences and Arts, Giza, Egypt.
Objective: Continuous advancements in composite resin materials have revolutionized and expanded its clinical use, improving its physical and mechanical properties. Attaining and retaining surface texture and gloss are crucial for the long-term durability of the composite resin material. This study investigated the supra-nanospherical filler composite material compared with different composite resin materials immersed in different beverages.
View Article and Find Full Text PDFEffects of quenched disorder on the kinetics and pathways of phase transition in a soft colloidal system.
J Chem Phys
January 2025
Department of Chemistry, Indian Institute of Science Education and Research (IISER) Tirupati, Tirupati, Andhra Pradesh 517619, India.
Although impurities are unavoidable in real-world and experimental systems, most numerical studies on nucleation focus on pure (impurity-free) systems. As a result, the role of impurities in phase transitions remains poorly understood, especially for systems with complex free energy landscapes featuring one or more intermediate metastable phases. In this study, we employed Monte Carlo simulations to investigate the effects of static impurities (quenched disorder) of varying length scales and surface morphologies on the crystal nucleation mechanism and kinetics in the Gaussian core model system-a representative model for soft colloidal systems.
View Article and Find Full Text PDFTuning the optical, electrical, and structural properties of Cu-DLC thin films via simultaneous DC-RF unbalanced magnetron sputtering.
Heliyon
November 2024
Faculty of Physics, Shahrood University of Technology, 3619995161, Shahrood, Iran.
This study evaluates the deposition of diamond-like carbon (DLC) films with copper impurities on a glass substrate using simultaneous direct current (DC) and radio frequency (RF) magnetron sputtering. The structural, optical, electrical, and mechanical properties, as well as the surface topography of the films, were investigated under various DC power levels using Raman spectroscopy, ellipsometry, UV-VIS, I-V measurements, nanoindentation, AFM, and FESEM. Results indicate that increasing the DC power to the graphite target from 60 to 120 , while maintaining a constant 10 of RF power to the copper target, enhances the optical absorption coefficient of the films and increases the optical bandgap from 0.
View Article and Find Full Text PDFThe Role of Implant Coronal Surface Properties on Early Adhesion of Streptococcus Oralis-An In Vitro Comparative Study.
J Biomed Mater Res A
January 2025
Research and Development, ZimVie Dental, Palm Beach Gardens, Florida, USA.
Dental implant coronal surfaces designed with the primary goal of maintaining crestal bone levels may also promote bacterial adhesion, leading to soft tissue inflammation and peri-implant bone loss. Achieving an optimal surface roughness that minimizes bacterial adhesion while preserving crestal bone is crucial. It is hypothesized that a specific threshold surface roughness value may exist below which, and above which, initial bacterial adhesion does not statistically change.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!