In this work, we establish that maintenance and inspection are a risk factor in helicopter accidents. Between 2005 and 2015, flawed maintenance and inspection were causal factors in 14% to 21% of helicopter accidents in the U.S. civil fleet. For these maintenance-related accidents, we examined the incubation time from when the maintenance error was committed to the time when it resulted in an accident. We found a significant clustering of maintenance accidents within a short number of flight-hours after maintenance was performed. Of these accidents, 31% of these accidents occurred within the first 10 flight-hours. This is reminiscent of infant mortality in reliability engineering, and we characterized it as maintenance error infant mortality. The last quartile of maintenance-related accidents occurred after 60 flight-hours following maintenance and inspection. We then examined the "physics of failures" underlying maintenance-related accidents and analyzed the prevalence of different types of maintenance errors in helicopter accidents. We found, for instance, that the improper or incomplete (re)assembly or installation of a part category accounted for the majority of maintenance errors with 57% of such cases, and within this category, the incorrect torquing of the B-nut and incomplete assembly of critical linkages were the most prevalent maintenance errors. We also found that within the failure to perform a required preventive maintenance and inspection task category, the majority of the maintenance programs were not executed in compliance with federal regulations, nor with the manufacturer maintenance plan. Maintenance-related accidents are particularly hurtful for the rotorcraft community, and they can be eliminated. This is a reachable objective when technical competence meets organizational proficiency and the collective will of all the stakeholders in this community. We conclude with a set of recommendations based on our findings, which borrow from the ideas underlying the defense-in-depth safety principle to address this disquieting problem.
Download full-text PDF |
Source |
---|---|
http://www.ncbi.nlm.nih.gov/pmc/articles/PMC6358063 | PMC |
http://journals.plos.org/plosone/article?id=10.1371/journal.pone.0211424 | PLOS |
Nat Commun
January 2025
Department of Mechanical Engineering, The University of Hong Kong, Hong Kong, China.
Aerial manipulators can manipulate objects while flying, allowing them to perform tasks in dangerous or inaccessible areas. Advanced aerial manipulation systems are often based on rigid-link mechanisms, but the balance between dexterity and payload capacity limits their broader application. Combining unmanned aerial vehicles with continuum manipulators emerges as a solution to this trade-off, but these systems face challenges with large actuation systems and unstable control.
View Article and Find Full Text PDFSci Rep
January 2025
Department of Materials Science and Engineering, Faculty of Engineering, Çanakkale Onsekiz Mart Universitesi, 17100, Çanakkale, Turkey.
The anisotropic behavior of fiber-reinforced polymer composites, coupled with their susceptibility to various failure modes, poses challenges for their structural health monitoring (SHM) during service life. To address this, non-destructive testing techniques have been employed, but they often suffer from drawbacks such as high costs and suboptimal resolutions. Moreover, routine inspections fail to disclose incidents or failures occurring between successive assessments.
View Article and Find Full Text PDFSensors (Basel)
December 2024
School of Engineering, RMIT University, 124 La Trobe Street, Melbourne, VIC 3000, Australia.
Civil infrastructure assets' contribution to countries' economic growth is significantly increasing due to the rapid population growth and demands for public services. These civil infrastructures, including roads, bridges, railways, tunnels, dams, residential complexes, and commercial buildings, experience significant deterioration from the surrounding harsh environment. Traditional methods of visual inspection and non-destructive tests are generally undertaken to monitor and evaluate the structural health of the infrastructure.
View Article and Find Full Text PDFMaterials (Basel)
January 2025
Zhejiang Scientific Research Institute of Transport, Hangzhou 311305, China.
As highway tunnel operations continue over time, structural defects, particularly cracks, have been observed to increase annually. Coupled with the rapid expansion of tunnel networks, traditional manual inspection methods have proven inadequate to meet current demands. In recent years, machine vision and deep learning technologies have gained significant attention in civil engineering for the detection and analysis of structural defects.
View Article and Find Full Text PDFJ Food Prot
January 2025
1st Department of Pathology, Medical School, National and Kapodistrian University of Athens, 75, Mikras Asias str., Goudi 11527 Athens, Greece; Master's Program "Environment and Health. Management of Environmental Health Effects," Medical School, National and Kapodistrian University of Athens, 75, Mikras Asias str., Goudi 11527 Athens, Greece.
Background: Ensuring food safety is a fundamental priority for public health. The catering sector has become prominent as a convenient and cost-effective method of food supply worldwide. Adherence to proper food hygiene practices is crucial for preventing foodborne diseases.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!