We developed a facile method for fabricating large-area, two-dimensional (2D), organic, highly crystalline films and extended it to organic thin-film transistor arrays. Tilted spinning provided oriented flow at the three-phase contact line, and a 2D crystalline film that consisted of layer-by-layer stacked 2,7-diocty[1]benzothieno[3,2- b]benzothiophene (C-BTBT) was obtained facilely for organic thin-film transistors (OTFTs). The extracted field-effect mobility is 4.6 cm V s, but with nonideal features. By applying this method to microdroplet arrays, an oriented crystal was fabricated, and the channel region for OTFTs was covered by adjusting the spinning speed. By tuning the tilt angle (θ) of the revolving substrate, we fabricated high-performance OTFT arrays with average and maximum mobilities of 7.5 and 10.1 cm V s, respectively, which exhibited high reliability factors of over 90% and were close to that of ideal transistors. These results suggest that high-quality crystalline films can be obtained via a facile tilted-spinning method.
Download full-text PDF |
Source |
---|---|
http://dx.doi.org/10.1021/acsami.8b21298 | DOI Listing |
Sci Rep
December 2024
Institute of Physics, University of São Paulo, São Carlos, 13560-590, SP, Brazil.
When combined with certain metal species, films of amorphous Ge or Si can have their typical crystallization temperatures decreased, by a factor of three or four, down to ~ 200 °C. The phenomenon is called metal-induced crystallization (MIC) and, since its first observation in the late 1960's, shows a great technological potential in producing (poly-)crystalline films of Ge or Si onto low-melting point substrates under reduced energy conditions. From the scientific point of view, the microscopic mechanisms behind the MIC phenomenon (still) represents a scientific challenge, where most of the proposed models are invariably influenced by the samples details giving the impression that they only apply to very specific metal-semiconductor combinations and/or circumstances.
View Article and Find Full Text PDFInt J Biol Macromol
December 2024
Department of Marine, Faculty of Fisheries and Marine, Universitas Airlangga, Campus C UNAIR, Mulyorejo, Surabaya 60115, Indonesia; Research Group of Post-harvest, Processing Technology, and Bioproducts, Faculty of Fisheries and Marine, Universitas Airlangga, Mulyorejo, Surabaya 60115, Indonesia. Electronic address:
Composite polymers are promising solution to structural setbacks of starch and alginate-based films due to their hydrophilic attributes. Hence, this study aimed to investigate young coconut jelly powder (CJP), an under-utilized by-waste, as a filler using the casting method to develop a novel biocomposite from increments of CJP (1-3 %) to a blended resin of arrowroot starch, sodium alginate, and glycerol. Moreover, the films were characterized by physicomechanical (visual aspect, thickness, color, moisture content, tensile strength, and elongation at break); surface microstructure; water barrier (water vapor permeability, water solubility, and water activities); thermal, crystallinity, and functional group properties; soil, river water, and seawater biodegradability; and coating application in cherry tomato.
View Article and Find Full Text PDFNanomaterials (Basel)
December 2024
School of Nuclear Science and Technology, Xi'an Jiaotong University, Xi'an 710049, China.
Transition metal nitrides have extensive applications, including magnetic storage devices, hardware resistance coatings, and low-temperature fuel cells. This study investigated the structural, electrical, and mechanical properties of thin zirconium nitride (ZrN) films by examining the effects of laser irradiation times. Thin ZrN films were deposited on glass substrates using pulsed DC magnetron sputtering and irradiated with a diode laser for 6 and 10 min.
View Article and Find Full Text PDFGels
November 2024
Biopolymer Research & Engineering Laboratory (BIOPREL), Escuela de Nutrición y Dietética, Facultad de Medicina, Universidad de Los Andes, Santiago 7550000, Chile.
Gelatin is a natural hydrocolloid with excellent film-forming properties, high processability, and tremendous potential in the field of edible coatings and food packaging. However, its reinforcing by materials such as cellulose nanocrystals (CNC) is often necessary to improve its mechanical behavior, including shape memory properties. Since the interaction between these polymers is complex and its mechanism still remains unclear, this work aimed to study the effect of low concentrations of CNC (2, 6, and 10 weight%) on the molecular organization, thermomechanical, and shape memory properties in mammalian gelatin-based composite films at low moisture content (~10 weight% dry base).
View Article and Find Full Text PDFAdv Mater
December 2024
Cavendish Laboratory, University of Cambridge, JJ Thomson Avenue, Cambridge, CB3 0HE, UK.
High contact resistance remains the primary obstacle that hinders further advancements of organic semiconductors (OSCs) in electronic circuits. While significant effort has been directed toward lowering the energy barrier at OSC/metal contact interfaces, approaches toward reducing another major contributor to overall contact resistance - the bulk resistance - have been limited to minimizing the thickness of OSC films. However, the out-of-plane conductivity of OSCs, a critical aspect of bulk resistance, has largely remained unaddressed.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!