Two-Stage Plasma-Thermal Nitridation Processes for the Production of Aluminum Nitride Powders from Aluminum Powders.

The synthesis of aluminum nitride (AlN) powders is traditionally done via the thermal nitridation process, in which the reaction temperature reaches as high as 960 °C, with more than several hours of reaction time. Moreover, the occurrence of agglomeration in melting Al particles results in poor AlN quality and a low efficiency of nitridation. In this study, an atmosphere-pressure microwave-plasma preceded the pre-synthesis process. This process operates at 550 °C for 2⁻10 min with the addition of NH₄Cl (Al: NH₄Cl = 1:1) for generating a hard AlN shell to avoid the flow and aggregation of the melting Al metals. Then, the mass production of AlN powders by the thermal nitridation process can be carried out by rapidly elevating the reaction temperature (heating rate of 15 °C/min) until 1050 °C is reached. X-Ray Diffractometer (XRD) crystal analysis shows that without the peak, Al metals can be observed by synthesizing AlN via plasma nitridation (at 550 °C for 2 min, Al: NH₄Cl = 1:1), followed by thermal nitridation (at 950 °C for 1 h). Moreover, SEM images show that well-dispersed AlN powders without agglomeration were produced. Additionally, the particle size of the produced AlN powder (usually < 1 μm) tends to be reduced from 2⁻5 μm (Al powders), resulting in a more efficient synthesizing process (lower reaction temperature, shorter reaction time) for mass production.