Polymeric Nanofilter Biointerface for Potentiometric Small-Biomolecule Recognition.

ACS Appl Mater Interfaces

Department of Materials Engineering, School of Engineering , The University of Tokyo, 7-3-1 Hongo , Bunkyo-ku, Tokyo 113-8656 , Japan.

Published: February 2019

In this paper, we propose a novel concept of a biointerface, a polymeric nanofilter, for the potentiometric detection of small biomolecules using an extended-Au-gate field-effect transistor (EG-Au-FET). A Au electrode has the potential capability to detect various small biomolecules with ultrasensitivity at nM levels on the basis of a surface redox reaction, but it exhibits no selective response to such biomolecules. Therefore, a suitable polymeric nanofilter is designed and modified on the Au electrode, so that a small target biomolecule reaches the Au surface, resulting in an electrical signal, whereas low-molecular-weight interferences not approaching the Au surface are captured in the polymeric nanofilter. The polymeric nanofilter is composed of two layers. The first layer is electrografted as an anchor layer by a cyclic voltammetry method. Then, a filtering layer is precisely polymerized as the second layer by a photo-mediated surface-initiated atom transfer radical polymerization method. The thickness and density of the polymeric nanofilter are controlled to specifically detect a small target biomolecule with high sensitivity. As a model case, l-cysteine as the small target biomolecule at nM levels is specifically detected by filtering l-DOPA as a low-molecular-weight interference using the polymeric nanofilter-grafted EG-Au-FET on the basis of the following mechanism. The phenylboronic acid (PBA) that copolymerizes with the polymeric nanofilter captures l-DOPA through diol binding, whereas l-cysteine reaches the Au surface through the filter layer. The polymeric nanofilter can also effectively prevent the interaction between biomacromolecules such as albumin and the Au electrode. A platform based on a polymeric nanofilter-grafted EG-Au-FET biosensor is suitable for the ultrasensitive and specific detection of a small biomolecule in biological samples such as tears and sweat, which include small amounts of low-molecular-weight interferences, which generate nonspecific electrical signals.

Download full-text PDF

Source
http://dx.doi.org/10.1021/acsami.8b20010DOI Listing

Publication Analysis

Top Keywords

polymeric nanofilter
32
small target
12
target biomolecule
12
polymeric
10
detection small
8
small biomolecules
8
detect small
8
reaches surface
8
low-molecular-weight interferences
8
polymeric nanofilter-grafted
8

Similar Publications

Bacterial nanocellulose (BNC) produced from sorbitol as a sustainable nano-filter for oil-water separation.

Int J Biol Macromol

January 2025

NCIM-Resource Center, Biochemical Science Division, CSIR-National Chemical Laboratory, Dr. Homi Bhabha Road, Pune 411008, India; Academy of Scientific and Innovative Research (AcSIR), Ghaziabad 201002, India. Electronic address:

Oil spillage is one of the serious problems for sustainable environment. Bacterial nanocellulose (BNC), a hydrophilic and highly porous material holds a promising material for oil-water separation from contaminants. In the present work, a hydrophilic BNC produced from a sorbitol as the carbon source demonstrated the unique porous symmetrical arrangement having an oleophilic property.

View Article and Find Full Text PDF

Fabrication of reusable 3D hierarchically porous air filtration based on multifunctional nanoclay-embedded cellulose electrospun nanofiber.

Int J Biol Macromol

November 2024

Department of Food Science and Technology, National Nutrition and Food Technology Research Institute, Faculty of Nutrition Sciences, Food Science and Technology, Shahid Beheshti University of Medical Sciences, Iran.

A special nano-filter made of cellulose acetate (CA) was developed, including a 3D hierarchically porous structure. The nano-filter utilized nano-clay (hydrophilic bentonite (NC)), comprising 0.5-1.

View Article and Find Full Text PDF

Air pollution has become a major challenge that threatens human health. The use of respiratory filters is one of the proposed solutions. In this study, using polystyrene (PS) fibers and various nanomaterials, improved respiratory filters were fabricated to remove air pollutants.

View Article and Find Full Text PDF

Respiratory masks are the primary and most effective means of protecting individuals from airborne hazards such as droplets and particulate matter during public engagements. However, conventional electrostatically charged melt-blown microfiber masks typically require thick and dense membranes to achieve high filtration efficiency, which in turn cause a significant pressure drop and reduce breathability. In this study, we have developed a multielectrospinning system to address this issue by manipulating the pore structure of nanofiber networks, including the use of uniaxially aligned nanofibers created via an electric-field-guided electrospinning apparatus.

View Article and Find Full Text PDF

Catalysts played a crucial role in advancing modern human civilization, from ancient times to the industrial revolution. Due to high cost and limited availability of traditional catalysts, there is a need to develop cost-effective, high-activity, and nonprecious metal-based electrocatalysts. Metal-organic frameworks (MOFs) have emerged as an ideal candidate for heterogeneous catalysis due to their physicochemical properties, hybrid inorganic/organic structures, uncoordinated metal sites, and accessible organic sections.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!