Synthesis of novel waste batteries-sawdust-based adsorbent via a two-stage activation method for Pb removal.

The novel waste alkaline battery-sawdust-based adsorbents (WABAs) are prepared by a two-stage activation method with the negative electrode materials as activator and different doping ratio of the positive electrode materials and pine sawdust as raw materials. The characteristics of the WABAs are analyzed by SEM, XRD, FT-IR, and specific surface determination (S). The Pb adsorption properties of the WABAs are studied by changing the pH of solution, contact time, initial concentration, and temperature. It turns out that when the doping mass ratio is 1:4, the optimum performance of the WABAs is obtained, and comparing with the samples prepared by pure biomass, the iodine adsorption value, total acid groups, and cation exchange capacity (CEC) separately increased by 13, 106, and 22%, respectively. Kinetic studies show that the pseudo-second-order model is more suitable for describing the Pb adsorption process and the Langmuir isotherm provides better fitting to the equilibrium data. The thermodynamic parameters indicate the adsorption process would be spontaneous and endothermic. Besides, the prepared WABAs could be reused for 5 cycles with high removal efficiency. This study provides an alternative route for waste alkaline battery treatment. Graphical abstract The schematic diagram of synthesis of waste batteries-sawdust-based adsorbent via a two-stage activation method for Pb removal.