Background: The major difference in the chemical composition of Y-TZP ceramics, as compared with conventional porcelain, led researchers to develop alternative solutions for achieving durable and long term bonding with the zirconia surface.
Objective: The study aims to evaluate the effects of glow discharge treatment on the bonding between cement and zirconia.
Methods: The zirconia rings and rods were prepared with the Zirconia Y-TZP powder and TZ-3YSB-E (Tosoh-Zirconia) through auto-mix to investigate the glow discharge and thermo-cycling. An orientation Teflon mold was used to centralize each rod into the zirconia ring, and aided as a cementation jig during the cementation procedure.
Results: Cohesive failure (2/3 or more of luting agent remained on the zirconia surface) has been majorly observed with RelyX Ultimate, while adhesion failure (less than 1/3 of the luting agent remained on the zirconia surface) has been primarily observed in Ketac-Cem. Mixed failure was observed among the three specimen including Rely X Unicem 2, Multilink Auto-mix and Ceramir.
Conclusion: The glow discharge surface treatment procedure had a major impact on bond strength to zirconia.
Download full-text PDF |
Source |
|---|---|
| http://www.ncbi.nlm.nih.gov/pmc/articles/PMC6210499 | PMC |
| http://dx.doi.org/10.2174/1874210601812010846 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Plasma-Liquid-Induced Synthesis of Scandium-Metalloporphyrin Frameworks for Boosted Sensing and Photosensitization.
Adv Mater
January 2025
Key Laboratory of Green Chemistry & Technology of Ministry of Education, College of Chemistry, Sichuan University, Chengdu, 610064, China.
Inserting metal ions into the porphyrin ring is one of the primary strategies to enhance the properties of porphyrin-based metal-organic frameworks (MOFs). However, the straightforward, rapid, and energy-efficient synthesis of porphyrin-based MOFs with high metallization for the porphyrin ring remains challenging. Herein, a solution anode glow discharge (SAGD) microplasma is presented for the one-step synthesis of scandium-metalloporphyrin frameworks (ScMPFs).
View Article and Find Full Text PDFCold atmospheric pressure plasma (CAPP) comprises an ensemble of ionized gas, neutral particles, and/or reactive species. Electricity is frequently used to produce CAPP via a variety of techniques, including plasma jets, corona discharges, dielectric barrier discharges, and glow discharges. The type and flow rates of the carrier gas(es), temperature, pressure, and vacuum can all be altered to control the desired properties of the CAPP.
View Article and Find Full Text PDFCharacterizing the stability of ultra-thin metal oxide catalyst films in non-thermal plasma CO reduction reactions.
Nanoscale Adv
December 2024
Department of Chemistry and Biochemistry, University of Arkansas Fayetteville AR 72701 USA
The use of metal oxide catalysts to enhance plasma CO reduction has seen significant recent development towards processes to reduce greenhouse gas emissions and produce renewable chemical feedstocks. While plasma reactors are effective at producing the intended chemical transformations, the conditions can result in catalyst degradation. Atomic layer deposition (ALD) can be used to synthesize complex, hierarchically structured metal oxide plasma catalysts that, while active for plasma CO reduction, are potentially vulnerable to degradation due to their high surface area and nanoscopic thickness.
View Article and Find Full Text PDFReal-Time Monitoring of Metal Ions during the Molten Salt Electrolysis Process by Optical Emission Spectrometry Based on Microplasma.
Anal Chem
December 2024
Institute of Nuclear and New Energy Technology, Tsinghua University, Beijing 100084, China.
Molten salt electrolysis has been widely used in the production and separation of metals, but it still lacks in situ real-time analysis methods to monitor the electrolysis process. In this work, a microplasma spectroscopic real-time analysis (MIPECA) system is developed based on noncontact direct current (DC) glow discharge. With the MIPECA system, the atomic emission spectroscopy of Li and K could be obtained in situ in LiCl-KCl molten salt, and the impact of different operating conditions on spectral signals was investigated.
View Article and Find Full Text PDFAnalysis of Trace Heavy Metal in Solution Using Liquid Cathode Glow Discharge Spectroscopy.
Sensors (Basel)
December 2024
Centre de Recherche et de Restauration des Musées de France (C2RMF), 75008 Paris, France.
Heavy metal pollution, particularly from cadmium (Cd) and copper (Cu), poses significant environmental and health risks. To address the need for efficient, portable, and sensitive detection methods, this study introduces an improved atmospheric pressure glow discharge atomic emission spectrometry (APGD-AES) technique for quantifying Cd and Cu in water samples. The APGD-AES method offers key advantages, including low energy consumption (<33 W), high excitation energy, and compact design.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!