Magnetically driven microrobots have been widely studied for various biomedical applications in the past decade. An important application of these biomedical microrobots is heart disease treatment. In intravascular treatments, a particular challenge is the submillimeter-sized guidewire steering; this requires a new microrobotic approach. In this study, a flexible microrobot was fabricated by the replica molding method, which consists of three parts: (1) a flexible polydimethylsiloxane (PDMS) body, (2) two permanent magnets, and (3) a micro-spring connector. A mathematical model was developed to describe the relationship between the magnetic field and the deformation. A system identification approach and an algorithm were proposed for steering. The microrobot was fabricated, and the models for steering were experimentally validated under a magnetic field intensity of 15 mT. Limitations to control were identified, and the microrobot was steered in an arbitrary path using the proposed model. Furthermore, the flexible microrobot was steered using the guidewire within a three-dimensional (3D) transparent phantom of the right coronary artery filled with water, to show the potential application in a realistic environment. The flexible microrobot presented here showed promising results for enhancing guidewire steering in percutaneous coronary intervention (PCI).
Download full-text PDF |
Source |
|---|---|
| http://www.ncbi.nlm.nih.gov/pmc/articles/PMC6315821 | PMC |
| http://dx.doi.org/10.3390/mi9120617 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
An agile multimodal microrobot with architected passively morphing wheels.
Sci Adv
December 2024
Applied Mechanics Laboratory, Department of Engineering Mechanics, Tsinghua University, Beijing 100084, China.
Multimodal microrobots are of growing interest due to their capabilities to navigate diverse terrains, with promising applications in inspection, exploration, and biomedicine. Despite remarkable progress, it remains challenging to combine the attributes of excellent maneuverability, low power consumption, and high robustness in a single multimodal microrobot. We propose an architected design of a passively morphing wheel that can be stabilized at distinct geometric configurations, relying on asymmetric bending stiffness of bioinspired tentacle structures.
View Article and Find Full Text PDFCounterfactual rewards promote collective transport using individually controlled swarm microrobots.
Sci Robot
December 2024
Department of Physics, University of Konstanz, Universitaetsstrasse 10, Konstanz, 78464, Germany.
Swarm robots offer fascinating opportunities to perform complex tasks beyond the capabilities of individual machines. Just as a swarm of ants collectively moves large objects, similar functions can emerge within a group of robots through individual strategies based on local sensing. However, realizing collective functions with individually controlled microrobots is particularly challenging because of their micrometer size, large number of degrees of freedom, strong thermal noise relative to the propulsion speed, and complex physical coupling between neighboring microrobots.
View Article and Find Full Text PDF3D Nanofabrication via Directed Material Assembly: Mechanism, Method, and Future.
Adv Mater
December 2024
Department of Mechanical and Automation Engineering, The Chinese University of Hong Kong, Shatin, New Territories, Hong Kong SAR.
Fabrication of complex three-dimensional (3D) structures at nanoscale is the core of nanotechnology, as it enables the creation of various micro-/nano-devices such as micro-robots, metamaterials, sensors, photonic devices, etc. Among most 3D nanofabrication strategies, the guided material assembly, an efficient bottom-up approach capable of directly constructing designed structures from precise integration of material building blocks, possesses compelling advantages in diverse material compatibility, sufficient driving forces, facile processing steps, and nanoscale resolution. In this review, we focus on assembly-based fabrication methods capable of creating complex 3D nanostructures (instead of periodic or 2.
View Article and Find Full Text PDFSingle-layer MoS/graphene-based stable on-chip Zn-ion microbattery for monolithically integrated electronics.
Sci Bull (Beijing)
November 2024
Institute of Flexible Electronics, Northwestern Polytechnical University, Xi'an 710072, China; Key Laboratory of Flexible Electronics of Zhejiang Province, Ningbo Institute of Northwestern Polytechnical University, Ningbo 315103, China. Electronic address:
Self-powered microelectronics are essential for the sustained and autonomous operations of wireless electronics and microrobots. However, they are challenged by integratable microenergy supplies. Herein, we report a single-layer (SL) MoS/graphene heterostructure for stable Zn-ion microbatteries.
View Article and Find Full Text PDFIn-situ isomerization and reversible self-assembly of photoresponsive polymeric colloidal molecules enabled by ON and OFF light control.
J Colloid Interface Sci
February 2025
Institute for Advanced Study, Shenzhen University, Nanhai Avenue 3688, Shenzhen 518060, China. Electronic address:
Photocatalytic colloids enable light-triggered nonequilibrium interactions and are emerging as key components for the self-assembly of colloidal molecules (CMs) out of equilibrium. However, the material choices have largely been limited to inorganic substances and the potential for reconfiguring structures through dynamic light control remains underexplored, despite light being a convenient handle for tuning nonequilibrium interactions. Here, we introduce photoresponsive N,O-containing covalent organic polymer (NOCOP) colloids, which display multi-wavelength triggered fluorescence and switchable diffusiophoretic interactions with the addition of triethanolamine.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!