Breast cancer diagnosis has been mostly accomplished by imaging technologies. These methods have the great advantages of detecting the presence and location of breast cancer. However, it's difficult to distinguish between a benign and malignant tumor in a deep position because both tumor types look similar. In this paper, we vibrated the tissue including tumor from skin with a compression cylinder to analyze the frequency difference for distinguishing the tissue type. Before distinguishing a benign and malignant tumor, it's necessary to validate to distinguish between normal tissue and tumor. The objective is to validate the feasibility of using a compression cylinder that emphasizes the differences in frequency between normal tissue and tumor. In two experiments, we measured the displacement on the surface of a breast phantom vibrated by an impulse hammer. We compared the frequency difference with and without a cylinder. We also studied the frequency changes in the relationship between tumor and cylinder position. We found a 5.0 Hz difference in compliance between normal tissue and the simulated tumor using a compression cylinder. The difference in frequency correlated negatively with distance from the simulated tumor to a compression cylinder. We concluded that a compression cylinder would enhance the frequency difference between normal tissue and a simulated tumor with appropriate configuration.
Download full-text PDF |
Source |
---|---|
http://dx.doi.org/10.1109/EMBC.2018.8512437 | DOI Listing |
J Oral Biosci
January 2025
Bioceramics Group, Research Center for Macromoleclules and Biomaterials, National Institute for Materials Science, Tsukuba, Japan. Electronic address:
Objectives: Hydroxyapatite (HAp)/collagen (Col) cylinders with laminated collagen layers were implanted into the tibial diaphysis of rats and examined histochemically to clarify how the orientation of HAp and Col bone-like nanocomposite fibers in HAp/Col blocks affects bone resorption and formation.
Methods: HAp/Col fibers were synthesized and compressed into cylindrical blocks to mimic bone nanostructures. These were implanted into the cortical bone cavities of 10-week-old male Wistar rats with fiber bundles parallel to the tibial surface.
Microsc Microanal
January 2025
Instrumental Analysis Center, Dalian University of Technology, No.2 Linggong Road, Ganjingzi District, Dalian, Liaoning Province 116024, China.
A self-opening transfer shuttle has been designed and fabricated for the transfer of air-sensitive samples to scanning electron microscopy (SEM). Delayed push out of an airtight sample cabin sealed inside the shuttle allows the protection of the sample from air exposure during the pumping of SEM chamber. A compressed spring is employed to automatically drive the push out of the cabin.
View Article and Find Full Text PDFPolymers (Basel)
December 2024
Department of Chemical Engineering, Yildiz Technical University, Davutpasa Campus, Esenler 34220, Türkiye.
Filament winding is a widely used out-of-autoclave manufacturing technique for producing continuous fiber-reinforced thermoplastic composites. This study focuses on optimizing key filament winding process parameters, including heater temperature, roller pressure, and winding speed, to produce thermoplastic composites. Using Box-Behnken response surface methodology (RSM), the study investigates the effects of these parameters on the compressive load of glass fiber-reinforced polypropylene (GF/PP) and polyphenylene sulfide (GF/PPS) composite cylinders.
View Article and Find Full Text PDFMaterials (Basel)
December 2024
Centre of Materials and Building Technologies (C-MADE), Department of Civil Engineering and Architecture, University of Beira Interior (UBI), 6201-001 Covilhã, Portugal.
The paper examines the impact of passive restraint on fire-induced spalling in concrete, utilizing a concrete mixture to minimize compositional variability. A variety of specimen geometries was prepared, including standard cubes and cylinders for the determination of mechanical properties and slabs of different dimensions for fire spalling tests conducted under controlled conditions. A top-opening Dragon furnace, which applies ISO 834-1 fire curves, was used to evaluate the influence of "cold rim" boundaries, where slab edges were insulated to create thermal restraint.
View Article and Find Full Text PDFHigh Alt Med Biol
November 2024
The Academy at Penguin Hall Wenham, Massachusetts, USA.
Lankford, Harvey V, Hannah Kimberley. Supplemental Oxygen on the Annie Smith Peck Expedition of 1903 to 6,367 m (20,892 ft) Mount Sorata (Illampu). 00:00-00, 2024.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!