The present study focused on the development of magnesium-functionalized graphene oxide (FGO) coating on titanium alloy (Ti6Al4V) by electrophoretic deposition. Graphene oxide (GO) was synthesized by modified Hummers' method and functionalized with magnesium ions. X-ray diffraction, infrared spectroscopy (IR) and Raman spectroscopy were employed to confirm the synthesis of GO and GO-coatings on Ti6Al4V. Functionalization of GO with Mg ions was confirmed by energy dispersive X-ray spectroscopy. The surface morphology of coated samples was examined through scanning electron microscopy. Reduction of FGO coating (labelled as rFGO) by heating at 200 °C was confirmed by IR. The rFGO coated Ti6Al4V was found to be hydrophilic in nature as determined by contact angle measurement which showed reduction in the contact angle of Ti6Al4V from 95.4° to 42.1°. The percent cell viability over the coated sample was appreciably improved compared to as-received Ti6Al4V sample owing to hydrophilicity of the former. The positive shift in open circuit potential and increase in polarization resistance was observed after coating Ti6Al4V samples with FGO. The significant decrease in the corrosion current density and negative polarization loop in the reverse scan of samples also confirmed the improved corrosion resistance of rFGO-coated Ti6Al4V over uncoated Ti6Al4V in the PBS solution. Furthermore, the impedance spectroscopy revealed that the preferential adsorption of ionic species (indicated by large R) at the surface improved the barrier characteristics of rFGO coated samples and exhibited an order of magnitude higher R compared to as-received samples.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1016/j.msec.2018.10.046 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
3D Bioprinting of Graphene Oxide-Incorporated Hydrogels for Neural Tissue Regeneration.
3D Print Addit Manuf
December 2024
Department of Mechanical Engineering, The University of Hong Kong, Hong Kong, Hong Kong.
Bioprinting has emerged as a powerful manufacturing platform for tissue engineering, enabling the fabrication of 3D living structures by assembling living cells, biological molecules, and biomaterials into these structures. Among various biomaterials, hydrogels have been increasingly used in developing bioinks suitable for 3D bioprinting for diverse human body tissues and organs. In particular, hydrogel blends combining gelatin and gelatin methacryloyl (GelMA; "GG hydrogels") receive significant attention for 3D bioprinting owing to their many advantages, such as excellent biocompatibility, biodegradability, intrinsic bioactive groups, and polymer networks that combine the thermoresponsive gelation feature of gelatin and chemically crosslinkable attribute of GelMA.
View Article and Find Full Text PDFImpaired Biofilm Development on Graphene Oxide-Metal Nanoparticle Composites.
Nanotechnol Sci Appl
December 2024
Department of Nanobiotechnology, Institute of Biology, Warsaw University of Life Sciences, Warsaw, Poland.
Purpose: Biofilms are one of the main threats related to bacteria. Owing to their complex structure, in which bacteria are embedded in the extracellular matrix, they are extremely challenging to eradicate, especially since they can inhabit both biotic and abiotic surfaces. This study aimed to create an effective antibiofilm nanofilm based on graphene oxide-metal nanoparticles (GOM-NPs).
View Article and Find Full Text PDFDegradation of AFB in edible oil by aptamer-modified TiO composite photocatalytic materials: Selective efficiency, degradation mechanism and toxicity.
Food Chem
December 2024
Food Engineering Technology Research Center/Key Laboratory of Henan Province, College of Food Science and Technology, Henan University of Technology, Lianhua Street, Zhengzhou 450001, China. Electronic address:
Most of the excessive aflatoxins in peanut oil are present at lower levels, and few photocatalysts have been reported for degrading low concentrations of aflatoxin B (AFB). This study employed aptamer-modified magnetic graphene oxide/titanium dioxide (MGO/TiO-aptamer) photocatalysts to degrade low concentrations of AFB in peanut oil, thoroughly investigating their selective efficiency, degradation mechanism, and product toxicity. The results indicated that the modification of aptamers on the surface of photocatalytic materials can enhance the selectivity of photocatalysts for AFB in peanut oil.
View Article and Find Full Text PDFEngineering and construction of multi-functional Janus separator for high-stability Li-CO battery.
J Colloid Interface Sci
December 2024
National and Local Joint Engineering Research Center for Lithium-ion Batteries and Materials Preparation Technology, Key Laboratory of Advanced Battery Materials of Yunnan Province, Faculty of Metallurgical and Energy Engineering, Kunming University of Science and Technology, Kunming 650093, China. Electronic address:
Due to the high theoretical energy density, lithium-carbon dioxide (Li-CO) batteries provide unique advantages when using CO to generate electricity. However, the issues with lithium dendrite generated by uneven deposition and quick cathode passivation continue to impede the development of Li-CO batteries. In this work, a Janus separator with dual functionalities is created using an in-situ growth and hydrothermal technique.
View Article and Find Full Text PDFUltrafine metal-organic framework @ graphitic carbon with MoS-CNTs nanocomposites as carbon-based electrochemical sensor for ultrasensitive detection of catechin in beverages.
Mikrochim Acta
December 2024
Key Laboratory of Environmentally Friendly Chemistry and Applications of Ministry of Education, College of Chemistry, Xiangtan University, Xiangtan, 411105, People's Republic of China.
GO/Co-MOF/PPy-350 (GPC-350) was synthesized by in situ growth of ultrafine Co-MOF on graphene oxide (GO), followed by encapsulation with polypyrrole (PPy) and calcination at 350.0℃. Meanwhile, MoS-MWCNTs (MoS-CNTs) were produced via the in situ synthesis of MoS within multi-walled carbon nanotubes (MWCNTs).
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!