Time-delayed mass spectrometry of the low-energy electron impact with a liquid beam surface.

Rev Sci Instrum

Hefei National Laboratory for Physical Sciences at the Microscale, Department of Chemical Physics, Collaborative Innovation Center of Chemistry for Energy Materials (iChEM), University of Science and Technology of China, Hefei 230026, China.

Published: October 2018

We set up an experimental apparatus to investigate the low-energy electron impact with a liquid beam surface, in which a cylindrical liquid beam with a diameter of 25 m emits as the laminar flow from a microjet and the positively charged ions produced by the electron-impact ionizations are detected with a linear time-of-flight mass spectrometer. We propose a time-delayed mass spectrometry for this apparatus to identify the cationic fragments produced on the liquid surface, in which the application of the ion extracting pulse is delayed with different time intervals after the electron beam pulse. Sensitivity and specificity of the present methodology are demonstrated by the combinational experiments of the gas-phase and liquid ethanol. In comparison with the gas-phase experiments, the ion peaks become much broader in the mass spectra of the liquid beam, primarily due to the molecular evaporation and diffusion. After delaying with about 2 s, we find that the hydrocarbon ions are ultimately the predominant products in the mass spectra of the liquid ethanol and they are proposed to be produced on the liquid surface. Above observations are in line with the widely accepted picture of the molecular orientation on the liquid surface; namely, the ethanol's CH-CH- group on the liquid surface prefers to be oriented outside. Therefore, we demonstrate a new mass spectrometry to explore the molecular structures of the liquid surface.

Download full-text PDF

Source
http://dx.doi.org/10.1063/1.5022394DOI Listing

Publication Analysis

Top Keywords

liquid surface
20
liquid beam
16
mass spectrometry
12
liquid
11
time-delayed mass
8
low-energy electron
8
electron impact
8
impact liquid
8
beam surface
8
produced liquid
8

Similar Publications

Liquid Active Surface Growth: Explaining the Symmetry Breaking in Liquid Nanoparticles.

ACS Nano

January 2025

Department of Chemistry, School of Science and Key Laboratory for Quantum Materials of Zhejiang Province, Research Center for Industries of the Future, Westlake University, Hangzhou 310030, China.

In our previous studies of metal nanoparticle growth, we have come to realize that the dynamic interplay between ligand passivation and metal deposition, as opposed to static facet control, is responsible for focused growth at a few active sites. In this work, we show that the same underlying principle could be applied to a very different system and explain the abnormal growth modes of liquid nanoparticles. In such a liquid active surface growth (LASG), the interplay between droplet expansion and simultaneous silica shell encapsulation gives rise to an active site of growth, which eventually becomes the long necks of nanobottles.

View Article and Find Full Text PDF

Slip flow, a fluid flow enhanced in comparison to that calculated using continuum equations, has been reported for many nanopores, mostly those with hydrophobic surfaces. We investigated the flow of water, hexane, and methanol through hydrophilic nanopores in silica colloidal crystals. Three silica sphere sizes were used to prepare the crystals: 150 ± 30, 500 ± 40, and 1500 ± 100 nm.

View Article and Find Full Text PDF

Recent progress in digital microfluidics has revealed the distinct advantages of liquid marbles, such as minimal surface friction, reduced evaporation rates, and non-wettability compared to uncoated droplets. This study provides a comprehensive examination of an innovative technique for the precise, contamination-free manipulation of non-magnetic water liquid marbles (WLMs) carried by a ferrofluid liquid marble (FLM) under the control of direct current (DC) and pulse-width modulation (PWM) magnetic fields. The concept relies on the phenomenon in which an FLM and WLMs form a shared meniscus when placed together on a water surface, causing the WLMs to closely track the magnetically actuated FLM.

View Article and Find Full Text PDF

Imidazolium-Based Ionic Liquid Exhibiting Dual Hydrophilic and Oleophobic Properties without Polar End Groups.

Langmuir

January 2025

Department of Chemical & Petroleum Engineering, University of Pittsburgh, Pittsburgh, Pennsylvania 15261, United States.

Simultaneously hydrophilic and oleophobic surfaces offer substantial advantages for applications such as antifogging, self-cleaning, and oil-water separation. It remains challenging to engineer such surfaces without requiring polar functional groups. This study introduces HFIL, a novel ionic liquid (IL) coating that achieves simultaneous hydrophilic and oleophobic properties via a one-step dip-coating process without relying on polar functional groups.

View Article and Find Full Text PDF

Amorphous Ni(OH) Coated Cu Dendrites with Superaerophobic Interface for Bipolar Hydrogen Production Assisted with Formaldehyde Oxidation.

Small

January 2025

State Key Laboratory Breeding Base of Green-Chemical Synthesis Technology, College of Chemical Engineering, Zhejiang University of Technology, Hangzhou, 310014, P. R. China.

Since formaldehyde oxidation reaction (FOR) can release H, it is attractive to construct a bipolar hydrogen production system consisting of FOR and hydrogen evolution reaction (HER). Although copper-based catalysts have attracted much attention due to their low cost and high FOR activity, the performance enhancement mechanism lacks in-depth investigation. Here, an amorphous-crystalline catalyst of amorphous nickel hydroxide-coated copper dendrites on copper foam (Cu@Ni(OH)/CF) is prepared.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!