A fabric-compatible UV sensor is presented using a cellulose-based thread coated with single-wall carbon nanotube ink. Two-terminal resistive responses of the thread were measured upon exposure to UV, and the effects of intensity, wavelength, and on/off cycling were studied. The sensor was tested in the field under direct sunlight, demonstrating practical usability for a wearable/flexible UV sensor system. The results here confirm the potential for an inexpensive wearable sensor in contrast to the conventional rigid and bulky solid-state detectors.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1021/acsami.8b16153 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Application of rhodamine B as thermochromic sensor for evaluation of performance of cold paint.
Sci Rep
December 2024
Faculty of Polymer Engineering, Sahand University of Technology, P.O. Box 51335-1996, Tabriz, Iran.
A thermochromic pigment, derived from reaction of ethylenediamine and rhodamine B known as MA-RB, has been successfully developed. This pigment showcases temperature-controlled visible color-transformation properties in both solid and solution states. The thermochromic pigment MA-RB exhibits a notable color change from light pink to rose red, triggered by thermal excitation.
View Article and Find Full Text PDFConductive polyacrylamide/pullulan/ammonium sulfate hydrogels with high toughness, low-hysteresis and tissue-like modulus as flexible strain sensors.
Int J Biol Macromol
December 2024
College of Materials Science and Engineering, Nanjing Tech University, Nanjing 210009, China.
Conductive hydrogels have great potential for applications in flexible wearable sensors due to the combination of biocompatibility, mechanical flexibility and electrical conductivity. However, constructing conductive hydrogels with high toughness, low hysteresis and skin-like modulus simultaneously remains challenging. In the present study, we prepared a tough and conductive polyacrylamide/pullulan/ammonium sulfate hydrogel with a semi-interpenetrating network.
View Article and Find Full Text PDFAssessment of varus thrust using inertial measurement units.
Clin Biomech (Bristol)
December 2024
Department of Kinesiology and Applied Physiology, University of Delaware, Newark, DE, USA. Electronic address:
Background: Varus thrust is common in those with knee osteoarthritis. Varus thrust is traditionally identified with visual analysis or motion capture, methods that are either dichotomous or limited to the laboratory setting. Inertial measurement unit data has been found to correlate with motion capture measures of varus thrust in those with severe knee osteoarthritis, allowing for a quantitative and accessible way of measuring varus thrust.
View Article and Find Full Text PDFFully Flexible Humidity Sensor with Fast Response and High Responsivity Based on rGO/MoS for Human Respiration Monitoring and Nontouch Switches.
ACS Appl Mater Interfaces
December 2024
Advanced Research Institute of Multidisciplinary Sciences, Beijing Institute of Technology, Beijing 100081, China.
Humidity sensors have been widely used to monitor humidity in daily life, agriculture fields, and so on. However, conventional sensors are not suitable for wearable devices because of their large dimensions and rigid substrates. Hence, we report a fast response, highly sensitive, and fully flexible humidity sensor on a PI substrate based on the composite material of reduced graphene oxide (rGO)/MoS, with a response time of 0.
View Article and Find Full Text PDFPiezoresistive Sensor Based on Porous Sponge with Superhydrophobic and Flame Retardant Properties for Motion Monitoring and Fire Alarm.
ACS Appl Mater Interfaces
December 2024
College of Chemistry and Chemical Engineering, Xi'an University of Science and Technology, Xi'an 710054, China.
Polyurethane sponge is frequently selected as a substrate material for constructing flexible compressible sensors due to its excellent resilience and compressibility. However, being highly hydrophilic and flammable, it not only narrows the range of use of the sensor but also poses a great potential threat to human safety. In this paper, a conductive flexible piezoresistive sensor (CHAP-PU) with superhydrophobicity and high flame retardancy was prepared by a simple dip-coating method using A-CNTs/HGM/ADP coatings deposited on the surface of a sponge skeleton and modified with polydimethylsiloxane.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!