In this work, well-aligned vertical ZnO nanorod (ZnO NRs) on p-type Si substrate was fabricated by a microwave-assisted hydrothermal reactor to study the coal mine methane (CMM) gas sensing properties. The XRD diffraction peaks and Raman spectra of the ZnO NRs confirmed the hexagonal wurtzite structure with strong preferential orientation along the c axis and well crystal quality. SEM analysis showed NRs with 100 nm average diameter and ~600 nm length. The variations of the sensor electrical resistance in the presence of CMM were investigated at different gas concentrations and various temperatures in the dark and under UV light. The selectivity and response time of the sensor to CMM gas were improved under UV irradiation. The optimal operating temperatures were 225 °C and 100 °C in dark and exposing UV-irradiation, respectively. Also the response of ZnO NRs sensor under UV excitation in humid condition was higher. The sensor was more selective to CMM than CO. The sensor stability was considered by repeating CMM detection for 90 days.
Download full-text PDF |
Source |
|---|---|
| http://www.ncbi.nlm.nih.gov/pmc/articles/PMC6214939 | PMC |
| http://dx.doi.org/10.1038/s41598-018-34707-x | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Advanced environmental remediation using enhanced performance of hollow ZnO@SnInS core-shell nanorod arrays for hazardous ion and organic pollutant removal.
J Environ Manage
January 2025
Mechatronics Engineering Department, School of Automobile, Mechanical and Mechatronics, Manipal University Jaipur, India. Electronic address:
Herein, novel hollow ZnO and ZnO@SnInS core-shell nanorods (NRs) with controlled shell thickness were developed via a facile synthesis approach for the efficient photocatalytic remediation of organic as well inorganic water pollutants. The introduction of SnInS shell layer coating over ZnO enhances visible light absorption, efficient exciton-mediated direct charge transfer, and reduces the band gap of ZnO@SnInS core-shell nanorods. The ZnO@SnInS core-shell nanorods show efficient solar-light driven catalytic efficiency for the disintegration of industrial dye (orange G), degradation of tetracycline, and reduction of hazardous Cr (VI) ions in aquatic systems.
View Article and Find Full Text PDFLight-Mediated Multilevel Neuromorphic Switching in a Hybrid Organic-Inorganic Memristor.
ACS Omega
December 2024
School of Physics and Astronomy, University of Nottingham, Nottingham NG7 2RD, U.K.
Article Synopsis
- New optoelectronic devices are emerging from the use of memristors that can be modulated with light, benefiting fields like computer vision and artificial intelligence.
- The study features memristors made from a hybrid material of zinc oxide nanorods and PMMA, which do not need a forming step and show effective electronic switching.
- These devices can switch with UV light and demonstrate notable memory capabilities, enabling applications in neural networks and neuromorphic computing due to their unique photonic synaptic functions.
Fabrication of an α-FeO NP-modified ZnO NRs/Ni-foam nanocomposite electrode for electrochemical detection of arsenic in drinking water.
RSC Adv
November 2024
Department of Science and Technology, Physics Electronics and Mathematics, Linköping University SE-60174 Norrköping Sweden +46 11 36 32 19.
Article Synopsis
- Arsenic is a toxic contaminant in drinking water, and this study introduces a new electrochemical sensor for detecting arsenic(v) using a modified electrode made from ZnO nanorods and α-FeO nanoparticles.
- The electrode is created through a two-step process involving hydrothermal synthesis and dip-coating, with the most effective results coming from a sample coated three times (ZNF-3), which exhibited the best morphology and electrochemical performance.
- Testing showed the sensor can detect arsenic(v) concentrations between 0 to 50 ppb, with a strong linear correlation in the calibration plot, and it has detection limits that are below the WHO's maximum recommended levels for arsenic in drinking water.
A novel approach for immobilizing Ag/ZnO nanorods on a glass substrate: Application in solar light-driven degradation of micropollutants in water.
Water Res
January 2025
Department of Chemical and Materials Engineering, University of Alberta, Edmonton, AB T6G 1H9, Canada. Electronic address:
One of the main challenges in applying photocatalysts for water treatment is the complex separation and recycling process. In this study, we developed highly stable, porous zinc oxide nanorods (ZnO NRs) immobilized on glass vials using a solvent exchange process (SEP) and hydrothermal calcination. Key parameters, including oleic acid concentration and hydrothermal growth time, were optimized to maximize the active surface area, significantly enhancing photodegradation performance.
View Article and Find Full Text PDFEngineering Charge Transfer Characteristics in ZnO NRs/AgO NPs p-n Heterojunctions: Toward Highly Efficient and Recyclable Photocatalysts.
Langmuir
November 2024
School of Materials Science and Engineering, Changchun University, Changchun 130022, China.
Staggered gap p-n heterojunction ZnO nanorods/AgO nanoparticles, a paradigm of photocatalysts, were developed via engineering the hydrothermal and coprecipitation method. Under simulated sunlight, the photocatalytic characteristics of ZnO/AgO(Zn/A) heterojunctions with varying mole ratios (from 8:1 to 8:4, named Zn/A-1-Zn/A-4) were systematically evaluated through the degradation of methylene blue (MB). The influence of key experimental variables, including photocatalyst concentration, MB concentration, and solution pH, on the photocatalyst performance was further analyzed.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!