Individual and sequential effects of stirring, smoothing, and cooling on the rheological properties of nonfat yogurts stirred with a technical scale unit.

J Dairy Sci

Dairy Science and Technology Research Centre (STELA), Quebec City, QC G1V 0A6, Canada; Institute of Nutrition and Functional Foods (INAF), Université Laval, Quebec City, QC G1V 0A6, Canada. Electronic address:

Published: January 2019

Few studies have considered the impact of unit operations during stirred yogurt manufacture because their operational sequence is difficult to replicate at the laboratory scale. The aim of this study was to investigate the individual and sequential effects of stirring in the yogurt vat, smoothing, and cooling on the rheological properties of yogurts, using a technical scale unit simulating some industrial conditions. The yogurts were prepared from a milk mixture that was standardized to contain 14% total solids, 0% fat, and 4% protein, and then homogenized, heated (94.5°C, 5 min), and inoculated at 41°C with the same thermophilic lactic starter. The operating parameters under investigation were 2 stirring durations in the yogurt vat (5 or 10 min), 2 cooling systems (plate or tubular heat exchanger), and 2 smoothing temperatures (38°C for smoothing before cooling; 20°C for smoothing after cooling). Sampling valves were installed at critical points on the technical scale unit so that the effect of each operation on the properties of stirred yogurt could be quantified individually. Syneresis, apparent viscosity, firmness, and consistency were analyzed after 1 d of storage at 4°C. In general, as the yogurts moved through the technical scale unit, the properties of the yogurts (evaluated after 1 d) changed: viscosity increased but syneresis, firmness, and consistency decreased. The individual effects of the operations showed that smoothing and cooling, compared with stirring duration, made the greatest contribution in terms of modifying yogurt properties. The stirring parameters (5 or 10 min) had similar effects on the yogurts. The use of a plate heat exchanger promoted a decrease in syneresis, whereas a tubular heat exchanger had a greater effect in terms of increasing firmness and consistency. The type of cooling system had no effect on stirred yogurt viscosity. Smoothing at 38°C had a greater effect on the increase in firmness, whereas smoothing at 20°C contributed more to a decrease in syneresis and increases in viscosity and consistency. This study confirms that each unit operation has a defined effect on the rheological properties of a nonfat stirred yogurt, which also depends on the operation sequence.

Download full-text PDF

Source
http://dx.doi.org/10.3168/jds.2018-14565DOI Listing

Publication Analysis

Top Keywords

smoothing cooling
20
technical scale
16
scale unit
16
stirred yogurt
16
rheological properties
12
heat exchanger
12
firmness consistency
12
individual sequential
8
sequential effects
8
effects stirring
8

Similar Publications

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!