In this study, tannery sludge was used as a partial replacement material for a geopolymer. The best raw material composition of the geopolymer and durability of the solidified product were studied. Solidification effect was analyzed via compressive strength and total concentration of chromium leached. Its durability in terms of high-temperature resistance, acid/base resistance property, and resistance to acid rain erosion was studied. Through X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), Thermogravimetric Differential Thermal Analysis (TG-DTA) and scanning electron microscopy (SEM), the compressive strength and total concentration of chromium leached in different environments were analyzed. The results show that the mechanical properties of the solidified product were optimal when the silica/alumina mole ratio and sodium oxide/silica mole ratio were 2.45 and 0.37, respectively. The optimal raw material ratio of the above-mentioned product was used to synthesize a geopolymer containing 20% tannery sludge, with the solidified product showing high durability, as indicated by its good high-temperature resistance, high resistance to acids and alkalis, and great resistance to acid rain erosion.
Download full-text PDF |
Source |
---|---|
http://dx.doi.org/10.1016/j.wasman.2018.08.039 | DOI Listing |
Waste Manag
January 2025
Qilu University of Technology (Shandong Academy of Sciences), Advanced Materials Institute, Shandong Engineering Research Centre of Municipal Sludge Disposal, Jinan 250014, China. Electronic address:
Municipal solid waste incineration fly ash (MSWIFA) is considered a hazardous solid waste, traditionally disposed by solidified landfill methods. However, solidified landfills present challenges with leaching heavy metals, polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs). To address this issue, this study examined two pretreatment methods for MSWIFA: sintering at 850℃ for 30 min and washing with three water baths (20 min each) at a 3:1 liquid-solid ratio.
View Article and Find Full Text PDFMaterials (Basel)
January 2025
Department of Geological Engineering, Firat University, Elazığ 23119, Türkiye.
Background: In this study, the unconfined compressive strength (q) of a mixture consisting of clay reinforced with 24 mm-long basalt fiber was estimated using extreme learning machine (ELM). The aim of this study is to estimate the results closest to the data obtained through experimental studies without the need for experimental studies. The literature review reveals that the ELM technique has not been applied to predict the compressive strength of basalt fiber-reinforced clay, and this study aims to provide a novel contribution in this area.
View Article and Find Full Text PDFMaterials (Basel)
January 2025
Department of Mechanics, Federal Institute of Education, Science and Technology of São Paulo, São Paulo 01109-010, Brazil.
The mechanical properties of a final product are directly influenced by the solidification process, chemical composition heterogeneity, and the thermal variables during solidification. This study aims to analyze the influence of solidification thermal variables on the microstructure, hardness, and phase distribution of the CuMn11Al8Fe3Ni3. The alloy was directionally and upward solidified from a temperature of 1250 °C.
View Article and Find Full Text PDFMicrob Pathog
January 2025
CSIR-Central Institute of Medicinal and Aromatic Plants, Lucknow-226015, Uttar Pradesh, India; Academy of Scientific and Innovative Research (AcSIR), Ghaziabad-201001, Uttar Pradesh, India. Electronic address:
We investigated the antimicrobial efficacy of seven essential oils from four plant families-Lamiaceae, Asteraceae, Zingiberaceae, and Poaceae-against microbes associated with dandruff. The antimicrobial effectiveness of these essential oils was assessed using paper disk agar diffusion and broth micro-dilution techniques. The results demonstrated that two of the essential oils significantly inhibited the growth of dandruff-associated microorganisms, with inhibition zones ranging from 5 ± 1.
View Article and Find Full Text PDFInt J Fertil Steril
January 2025
Department of Embryology, Reproductive Biomedicine Research Center, Royan Institute for Reproductive Biomedicine, ACECR, Tehran, Iran.
Background: The utilization of decellularized extracellular matrix (dECM) derived from animal testis tissue has demonstrated potential as a component of tissue-specific scaffolds. Current research is mostly centered around dECM as a natural resource for culturing testicular cells. This study aimed to assess firstly the comparison of Voytik-Harbin (VH) and Frytes protocol in creating Ram's dECM testis hydrogel and secondly the evaluation of the best protocol effect on spermatogenesis.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!