AI Article Synopsis
Article Abstract
Purpose: The aim of this study was to investigate the fracture strength of computer-aided design/computer-aided manufacturing (CAD/CAM) posterior ceramic crowns with and without post-milling manual enhancement of occlusal morphology (MEOM), as indicated especially with early CAD/CAM restorations that have limited capacity to generate natural occlusal morphology.
Materials And Methods: A mandibular molar of an acrylic tooth model was prepared to receive a CAD/CAM all-ceramic crown and was used as a master die to fabricate 80 prepared tooth replicas using an epoxy resin with an elastic modulus (E) of 18 GPa. The crown was designed using Cerec software's Biogeneric Copy Design mode (Sirona). Eighty identical monolithic crowns were fabricated by milling four types of ceramic blocks. Forty monolithic crowns (10 of each ceramic system) were randomly selected as the control group, and MEOM was performed for each of the other 40 crowns by a certified dental technician. Restorations were crystallized and glazed according to the manufacturers' instructions and firing protocols. All crowns were cemented to their respective die using resin cement, and loaded to fracture at a crosshead speed of 0.5 mm/min. The resultant fractures were classified into three modes. Data were statistically analyzed using the nonparametric Mann-Whitney U test at α = 0.05.
Results: The MEOM treatment decreased the fracture load for all ceramic brands.
Conclusion: The MEOM procedure should be considered detrimental for monolithic CAD/CAM-generated crowns and should thus be avoided.
Download full-text PDF |
Source |
|---|
Publication Analysis
Top Keywords
Similar Publications
Romosozumab Improves Tissue Thickness-Adjusted Trabecular Bone Score in Women With Osteoporosis and Diabetes.
J Clin Endocrinol Metab
January 2025
The University of Texas Southwestern Medical Center, Dallas, TX 75390, USA.
Context: Trabecular bone score (TBS), a gray-level texture index derived from lumbar spine (LS) dual-energy x-ray absorptiometry (DXA) scans, is decreased in patients with diabetes and is associated with increased fracture risk, independent of areal bone mineral density (aBMD), but potentially influenced by abdominal fat tissue.
Objective: Evaluate effect of romosozumab (210 mg monthly) for 12 months followed by alendronate (70 mg weekly) for 24 months vs alendronate alone (70 mg weekly) for 36 months on LS aBMD and TBS in women with type 2 diabetes (T2D) enrolled in the ARCH study.
Methods: This post hoc analysis included women from ARCH who had T2D at baseline and LS DXA scans at baseline and ≥1 postbaseline visit (romosozumab-to-alendronate, n = 165; alendronate-to-alendronate, n = 195).
A Twist on Injection Molding: Injecting Conventional Resin Composites.
J Esthet Restor Dent
January 2025
Private Practice, Des Moines, Iowa, USA.
Purpose: This article presents a different approach to injectable techniques. This technique uses conventional viscosity materials to achieve maximum strength and esthetics.
Clinical Considerations: The use of high-viscosity material which has the strongest physical properties is desirable since failure of anterior resin composite has been described as fracture and recurrent decay.
Biaxial Flexural Strength and Vickers Hardness of 3D-Printed and Milled 5Y Partially Stabilized Zirconia.
J Funct Biomater
January 2025
Department of Prosthodontics, Medical Faculty, Heidelberg University, Im Neuenheimer Feld 400, 69120 Heidelberg, Germany.
This study compares the mechanical properties of 5-mol% yttria partially stabilized zirconia (5Y-PSZ) materials, designed for 3D printing or milling. Three 5Y-PSZ materials were investigated: printed zirconia (PZ) and two milled zirconia materials, VITA-YZ-XT (MZ-1) and Cercon xt (MZ-2). PZ samples were made from a novel ceramic suspension via digital light processing and divided into three subgroups: PZ-HN-ZD (horizontal nesting, printed with Zipro-D Dental), PZ-VN-Z (vertical nesting, printed with Zipro-D Dental) and PZ-VN-Z (vertical nesting, printed with Zipro Dental).
View Article and Find Full Text PDFEvaluation of Extra-High Translucent Dental Zirconia: Translucency, Crystalline Phase, Mechanical Properties, and Microstructures.
J Funct Biomater
January 2025
Department of Gerodontology and Oral Rehabilitation, Graduate School of Medical and Dental Sciences, Institute of Science Tokyo, Tokyo 113-8549, Japan.
Highly translucent zirconia (TZ) is frequently used in dentistry. The properties of several highly translucent zirconia materials available in the market require an in-depth understanding. In this study, we assessed the translucency, crystalline phase, mechanical properties, and microstructures of three newly developed highly translucent zirconia materials (Zpex 4.
View Article and Find Full Text PDFGraphene aerogels with high surface areas, ultra-low densities, and thermal conductivities have been attracted a lot of attention in recent years. However, considerable difference in their deformation behavior and mechanical properties lead to their poor performance. The problem can be solved by preparing graphene aerogel of given morphology and by control the properties through the special structure of graphene cells.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!