AI Article Synopsis
Article Abstract
Activating agents play significant roles in the preparation of activated carbon (AC) from biomasses and their wastes, which are widely used in AC production. Application methods are also important for the production process. Products give remarkable ideas regarding the method and heat treatment process. The activated carbon was produced from waste tea in accordance with either the conventional method or microwave energy pretreated method using phosphoric acid (HPO) as activating agent. The yields of the activated carbons were 51.8% for conventional method and 46.0% for microwave pretreated method. The acid suppressed the formation of tar and promoted the amount of solid and aromatic structure accordance to sp hybridisation. Additionally, the waste tea was directly carbonised (without HPO) and the yield was 36.3%. Major gas (H, CH, CH, CH, CO and CO) products obtained during heat treatment process in a conventional furnace were examined in terms of quantity and quality. The solid products were characterised in terms of surface area, pore size and surface properties. The result of gas analysis showed that phosphoric acid affected formation of activated carbon mechanism and significant reactions occurred during microwave pretreatment process.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1016/j.jenvman.2018.09.046 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Reverse Osmosis Coupled with Ozonation for Clean Water Recovery from an Industrial Effluent: Technical and Economic Analyses.
Membranes (Basel)
January 2025
Departamento de Ciencias del Agua y Medio Ambiente, Instituto Tecnológico de Sonora, 5 de Febrero 818 sur Col. Centro, Cd. Obregón C.P. 85000, Sonora, Mexico.
Technical and economic criteria were used to evaluate the feasibility of the treatment of an industrial effluent (10 m/h) for water recovery and reuse. The treatment evaluation included the following: (1) effluent characteristic determination; (2) selection and evaluation of the effluent treatment at lab scale, establishing operating conditions and process efficiency; (3) scaling up the treatment process to the industrial level; (4) treatment plant design and commercial availability analysis of the required equipment; and (5) the costs of the inversion and operation of the plant treatment, cost/m for water recovery, and time of investment recovery. The physicochemical characteristics of the effluent exposed the polluted wastewater with sodium chloride salts and colourants, predominating a mixture of tartrazine, Red 40, and brilliant blue from the synthesis of food additives.
View Article and Find Full Text PDFCircular Economy Applied to Sludge Minimization: The STAR Project.
Membranes (Basel)
January 2025
Department of Civil, Environmental, Architectural Engineering and Mathematics, University of Brescia, Via Branze 43, 25123 Brescia, Italy.
The management of biological sludge from wastewater treatment plants (WWTPs) poses a significant environmental challenge due to increasing sludge production and the presence of emerging pollutants. This study investigates an innovative solution by integrating a thermophilic aerobic membrane reactor (TAMR) into the sludge treatment line of a medium-size WWTP, aiming to minimize biological sludge output while enhancing resource recovery. The study involved a six-month monitoring of an industrial-scale TAMR system, assessing the reduction in volatile solids (VSs) in thickened sludge and evaluating the compatibility of TAMR residues with conventional activated sludge (CAS) systems.
View Article and Find Full Text PDFCarbon Nanofiber-Reinforced Carbon Black Support for Enhancing the Durability of Catalysts Used in Proton Exchange Membrane Fuel Cells Against Carbon Corrosion.
Membranes (Basel)
December 2024
Department of Chemical & Biological Engineering, Hanbat National University, Daejeon 34158, Republic of Korea.
This study addresses the critical challenge of carbon corrosion in proton exchange membrane fuel cells (PEMFCs) by developing hybrid supports that combine the high surface area of carbon black (CB) with the superior crystallinity and graphitic structure of carbon nanofibers (CNFs). Two commercially available CB samples were physically activated and composited with two types of CNFs synthesized via chemical vapor deposition using different carbon sources. The structure, morphology, and crystallinity of the resulting CNF-CB hybrid supports were characterized, and the performances of these hybrid supports in mitigating carbon corrosion and enhancing the PEMFC performance was evaluated through full-cell testing in collaboration with a membrane electrode assembly (MEA) manufacturer (VinaTech, Seoul, Republic, of Korea), adhering to industry-standard fabrication and evaluation procedures.
View Article and Find Full Text PDFHigh Capacity and Ultralong Lifespan Aqueous Lithium-Bromine Batteries Realized by Low-Cost Concentrated Electrolyte Coupled with Dependable Lithium Titanium Phosphate.
ACS Appl Mater Interfaces
January 2025
Shaanxi Key Laboratory of Energy Chemical Process Intensification, School of Chemical Engineering and Technology, Xi'an Jiaotong University, Xi'an 710049, Shaanxi, China.
Aqueous halogen batteries are gaining recognition for large-scale energy storage due to their high energy density, safety, environmental sustainability, and cost-effectiveness. However, the limited electrochemical stability window of aqueous electrolytes and the absence of desirable carbonaceous hosts that facilitate halogen redox reactions have hindered the advancement of halogen batteries. Here, a low-cost, high-concentration 26 m Li-B-C-O aqueous solution incorporating lithium bromide (LiBr), lithium chloride (LiCl), and lithium acetate (LiOAc) was developed for aqueous batteries, which demonstrated an expanded electrochemical stability window of .
View Article and Find Full Text PDFSynergistic Enhancement of Ferroptosis via Mitochondrial Accumulation and Photodynamic-Controlled Release of an Organogold(I) Cluster Prodrug.
J Am Chem Soc
January 2025
Key Laboratory of Bioorganic Phosphorus Chemistry and Chemical Biology (Ministry of Education), Department of Chemistry, Tsinghua University, Beijing 100084, P. R. China.
Effective delivery and controlled release of metallo-prodrugs with sustained activation and rapid response feed the needs of precise medicine in metal chemotherapeutics. However, gold-based anticancer drugs often suffer from detoxification binding and extracellular transfer by sulfur-containing peptides. To address this challenge, we integrate a thiol-activated prodrug strategy of newly prepared hypercoordinated carbon-centered gold(I) clusters (HCGCs) with their photosensitization character to augment the mitochondrial release of Au(I) in tumors.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!