Current energy crises are inspiring researchers to focus intensively on development of feasible ways to produce high performing composite electrode materials for increasing energy demands. The present work addresses this objective by developing a novel structure of NiFe2O4 (NFO) nanoparticles coated on graphene capsules (GCs) by a simple hydrothermal technique. This NFO-GCs electrode material was subjected to different types of electrochemical performance evaluations to investigate its feasibility as a supercapacitor electrode. The as-prepared NFO-GCs nanocomposite electrode exhibits high specific capacitance of 1028 F g-1 at a current density of 2 A g-1 and 94% capacitance retention at the end of 10 000 charge-discharge cycles, whereas pristine NFO electrode shows 720 F g-1 specific capacitance with 88% capacitance retention. The high specific capacitance, good rate capability, and excellent cycling stability of NFO-GCs composite can be attributed to effective synergism between the GCs and NFO. The superior electrochemical performance of NFO-GCs nanocomposite demonstrates possible application of this material as a working electrode for fully functional supercapacitor devices.

Download full-text PDF

Source
http://dx.doi.org/10.1039/c8dt02319kDOI Listing

Publication Analysis

Top Keywords

specific capacitance
12
nanoparticles coated
8
coated graphene
8
electrochemical performance
8
nfo-gcs nanocomposite
8
high specific
8
capacitance retention
8
electrode
7
capacitance
5
nifeo nanoparticles
4

Similar Publications

The rising demand for efficient energy storage in flexible electronics is driving the search for materials that are well-suited for the fabrication of these devices. Layered Double Hydroxides (LDHs) stand out as a remarkable material with a layered structure that embodies exceptional electrochemical properties. In this study, both double-shelled and single-shelled NiFe-Layered Double Hydroxide (LDH) particles are prepared using spindle-shaped MIL-101(Fe) as the template.

View Article and Find Full Text PDF

Implantable Passive Sensors for Biomedical Applications.

Sensors (Basel)

December 2024

School of Electrical and Computer Engineering, National Technical University of Athens, 15772 Athens, Greece.

Article Synopsis
  • Implantable sensors are becoming popular for localized and continuous monitoring in medical settings, allowing for early detection and timely interventions.
  • There are two main types of implantable sensors: active, which have more advanced functionalities but require a power source, and passive, which don't need power and offer simpler, smaller designs.
  • This review focuses on passive sensor technologies, discussing their materials, detection methods, clinical applications, advantages over active sensors, and important considerations for their packaging and compatibility with the human body.
View Article and Find Full Text PDF

Utilizing lignin-derived activated carbon in supercapacitors has emerged as a promising approach to alleviating environmental pollution and promoting the high-value utilization of byproducts in the papermaking industry. In this study, activated carbons (LACs) were prepared using a simple one-step KOH activation approach and by employing enzymatic hydrolysis lignin (EHL). The impact of the KOH activation parameters on the microstructure and capacitive performance of the LACs was investigated by varying the KOH/EHL ratio and activation temperature.

View Article and Find Full Text PDF

Co-Hydrothermal Carbonization of Goose Feather and Pine Sawdust: A Promising Strategy for Disposal of Sports Waste and the Robust Improvement of the Supercapacitor Characteristics of Pyrolytic Nanoporous Carbon.

Molecules

December 2024

Shanghai Key Laboratory of Atmospheric Particle Pollution and Prevention (LAP3), Department of Environmental Science and Engineering, Fudan University, Shanghai 200433, China.

Discarded sports waste faces bottlenecks in application due to inadequate disposal measures, and there is often a neglect of enhancing resource utilization efficiency and minimizing environmental impact. In this study, nanoporous biochar was prepared through co-hydrothermal carbonization (co-HTC) and pyrolytic activation by using mixed goose feathers and heavy-metals-contaminated pine sawdust. Comprehensive characterization demonstrated that the prepared M-3-25 (Biochar derived from mixed feedstocks (25 mg/g Cu in pine sawdust) at 700 °C with activator ratios of 3) possesses a high specific surface area 2501.

View Article and Find Full Text PDF

The advancement of miniaturizing electronic information technology draws growing interest in dielectric capacitors due to their high-power density and rapid charge/discharge capabilities. The sol-gel method was utilized to fabricate the 0.75Pb(ZrTi)O-0.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!