Purpose: This in vivo study used control variable implants to compare early bone responses in fluoride-modified (F-mod) and hydrophilic, sandblasted, large-grit, acid-etched (modSLA) surface implants that differed in implant design.
Materials And Methods: Four different types of implants (n = 24) were prepared: F-mod surface with Astra Tech implant design; modSLA surface with Straumann implant design; sandblasted, large-grit, acid-etched (SLA) surface with Astra Tech design; and SLA surface with Straumann implant design. Scanning electron microscopy, confocal laser scanning microscopy, and x-ray photoelectron spectroscopy were performed to assess implant surface characteristics. Four implants from each implant type were inserted in the tibiae of four rabbits that were sacrificed 10 days after surgery. Bone-to-implant contact (BIC) and bone area (BA) were measured to evaluate early bone responses. Analysis of variance with Tukey's multiple comparison method was used for the histomorphometric data to find any significant difference. The surface characteristic-related data were analyzed using the Kruskal-Wallis test. The level of significance was .05 in statistical analyses.
Results: No significant differences in BIC and BA were found among the modified surfaces (P > .05), whereas significant differences were found in surface topography and surface chemistry. The different designs showed no significant effects on early bone responses when identical surface modifications were applied (P > .05).
Conclusion: F-mod and modSLA surfaces showed no significant differences in early bone responses. Furthermore, the implant design had no influence on the bone response. This in vivo experimental model will help improve the evaluation of surface modification factors by allowing an independent estimation of one variable (surface modification) against a constant (implant design).
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.11607/jomi.6436 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Osseointegration and fixation opportunities of sacroiliac instrumentation: a preclinical evaluation in a large animal model.
J Spine Surg
December 2024
Surgical and Orthopaedic Research Laboratories, Prince of Wales Clinical School, University of New South Wales, Sydney, AUS.
Background: Implant fixation is often the cornerstone of musculoskeletal surgical procedures performed to provide bony fixation and/or fusion. The aim of this study was to evaluate how different design features and manufacturing methods influence implant osseointegration and mechanical properties associated with fixation in a standardized model in cancellous bone of adult sheep.
Methods: We evaluated the performance of three titanium alloy implants: (A) iFuse-TORQ implant; (B) Fenestrated Sacroiliac Device; and (C) Standard Cancellous Bone Screw in the cancellous bone of the distal femur and proximal tibia in 8 sheep.
Cementless fixation in total joint arthroplasty: Factors impacting osseointegration.
J Clin Orthop Trauma
February 2025
Orthopedic Surgery, Brigham & Women's Hospital, Harvard University, Boston, MA, USA.
•The success of cementless fixation in TJA depends on a multitude of factors including biological, mechanical, implant, surgical, and material properties.•Biologic fixation has become the primary mode of fixation for the majority of primary total hip arthroplasty (THA) surgeries done today in the United States (US) due to its low complication rate and superior longevity compared to cemented fixation.•Cementless fixation has yet to gain wider acceptance in total knee arthroplasty (TKA) and hip hemiarthroplasty due to several factors including host bone quality, implant design, and surgical technique.
View Article and Find Full Text PDFDesign concepts for advanced-technology intraocular lenses [Invited].
Biomed Opt Express
January 2025
Center for Visual Science, The Institute of Optics, Flaum Eye Institute. University of Rochester, Rochester, NY, USA.
An intraocular lens (IOL) replaces the natural crystalline lens during cataract surgery, and although the vast majority of implants have simple optics, "advanced technology" IOLs have multifocal and extended depth of focus (EDOF) properties. Optical concepts are evaluated here, with image contrast, focal range, and unwanted visual phenomena being the primary concerns. Visual phenomena with earlier bifocal diffractive lenses led to alternative diffractive designs (trifocals, etc.
View Article and Find Full Text PDFEffect of Laminectomy Methods on the Surgical Safety of Automatic Laminectomy Robot.
Int J Med Robot
February 2025
Beijing Key Laboratory for Design and Evaluation Technology of Advanced Implantable & Interventional Medical Devices, Beijing Advanced Innovation Center for Biomedical Engineering, School of Biological Science and Medical Engineering, Beihang University, Beijing, China.
Background: The efficacy of laminectomy procedures is contingent on the method of resection. The objective of this study was to investigate the impact of different methods of resection on the surgical safety of automated laminectomy robots, an area that remains uncharted.
Methods: Lamina resection surgeries using both drilling and layer-by-layer methods, are performed on ovine spinal samples.
Optical fibers are between the most common implantable devices for delivering light in the nervous system for optogenetics and infrared neural stimulation applications. Tapered optical fibers, in particular, can offer homogeneous light delivery to a large volume and spatially resolved illumination compared to standard flat-cleaved fibers while being minimally invasive. However, the use of tapers for neural applications has up to now been limited to silica optical fibers, whose large Young's modulus can cause detrimental foreign body response in chronic settings.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!