In this Letter, it has been shown that the twisting of TFBGs (tilted fiber Bragg gratings) decreases their sensitivity to the polarization of the input light. It has been proved by a theoretical simulation study that twisting the TFBG by 180° eliminates the sensitivity of the grating to input light polarization changes. We have experimentally proved that our structure produced has an 18 times lower coefficient of variation of transmission for polarization changes than the untwisted TFBG. This Letter also presents a new method for manufacturing the twisted tilted fiber Bragg grating (TTFBG). We have demonstrated the possibility of writing the TTFBG structure twisted by 90° on a fiber with a length of 10 mm. The structure has been further twisted in the other direction by 90°, which is consistent with a structure twisted by 180°. The properties of both structures were determined. Due to the fiber's strength, the TTFBG twisted by 180° has to be 2 cm long. An advantage of the proposed method of producing the TTFBG is that there is a twist of the structure itself after fabrication. This creates new possibilities of using the structure in many applications. This type of grating can be used to reduce the sensitivity to polarization in various sensing applications, in particular, to measure the refractive index. In addition, a 180° twisted TTFBG has properties of direction discrimination in twist sensing applications.

Download full-text PDF

Source
http://dx.doi.org/10.1364/OL.43.004445DOI Listing

Publication Analysis

Top Keywords

tilted fiber
12
fiber bragg
12
structure twisted
12
twisted tilted
8
bragg gratings
8
sensitivity polarization
8
input light
8
polarization changes
8
twisted 180°
8
sensing applications
8

Similar Publications

Our study addresses the pressing global freshwater scarcity crisis by engineering advanced liquid-entrapped nanosurfaces optimized for highly efficient atmospheric water harvesting (AWH). Through a synergistic approach integrating carbon fiber paper (CFP), hydrothermally synthesized nanoneedles (NNs), and silicone oil liquid entrapment (LE) within NNs, we achieved remarkable improvements in water collection efficiency. While CFP captures fog effectively during AWH, it faces challenges with water-pinning effects, mitigated by NNs' improved droplet-spreading properties, leading to a notable 50% increase in harvesting efficiency.

View Article and Find Full Text PDF

In this Letter, we propose a new method utilizing femtosecond laser direct writing technology to rapidly inscribe high-quality tilted fiber Bragg gratings (TFBGs) in multicore fibers (MCFs). A series of TFBGs with varying tilt angles were directly inscribed in MCFs using the Plane-by-Plane (Pl-by-Pl) method, and the writing time for a 4 mm long TFBG was only 3.60 s.

View Article and Find Full Text PDF

We introduced a two-dimensional vector-bending sensor using excessively tilted fiber grating (ExTFG) encapsulated in a non-neutral axis position within a flexible cylinder. The asymmetrical structure enabled both TM and TE modes of the ExTFG to achieve the competency of one-dimensional vector bending sensing by cleverly leveraging the orthogonal relationship between these modes to achieve the effect of orthogonal cascading of two one-dimensional sensors. The resonance wavelength changes of the TM and TE modes were monitored under equal excitation states to achieve two-dimensional vector bending sensing, which significantly simplified the manufacturing complexity of the sensor; the longer the off-axis distance, the higher the sensitivity, and the smaller the maximum measurable curvature.

View Article and Find Full Text PDF
Article Synopsis
  • The study examined how optic disc torsion (ODT), horizontal disc tilt (HDT) angle, and ovality index (OI) affect the thickness of retinal nerve fiber layer (RNFL) and ganglion cell-inner plexiform layer (GCIPL) in healthy myopic eyes.
  • Measurements were taken from fundus photographs and swept-source optical coherence tomography, with adjustments for age and axial length.
  • Results showed that OI and HDT angle correlated with variations in RNFL and GCIPL thickness, indicating that optic disc morphology should be factored into developing myopic normative databases.
View Article and Find Full Text PDF
Article Synopsis
  • Fiber optic sensors can now detect a battery's state of charge (SOC) and electromotive force (EMF) in real-time, but understanding the link between the sensor's spectral changes and internal EMF changes is challenging.
  • The proposed method uses a tiny tilted fiber Bragg grating (TFBG) sensor to monitor electrolyte levels during battery discharge, effectively correlating the fiber optic transmission spectrum with battery EMF.
  • The results indicate that using a TFBG sensor in lead-acid batteries allows for quick EMF detection, showcasing its potential for improving battery performance monitoring and failure detection.
View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!