The influence of structural constraints on the relaxation dynamics of three polyurea networks with a varying degree of crosslinking, has been studied by means of a thorough analysis of broadband dielectric spectroscopy measurements. Two different relaxation processes are observed, namely, a fast process involving the soft poly(propylene oxide) chains, and a slower and much broader process associated with the immediate surroundings of the hard crosslinkers. Microphase separation in soft and hard domains characterizes the systems in the presence of hydrogen bonding. In this case, different confinement conditions are explored by varying the soft chain length; overall, so called "adsorption" effects dominate. With respect to both cooperativity and the rearrangement energy threshold in fast relaxation, it is found that the enhancement of configurational constraints is similar to cooling, but only on qualitative grounds. An upper bound of the hard domains' interface thickness, in which the slow relaxation is believed to take place, is estimated from the analysis of the fast relaxation in the system characterized by the highest degree of confinement, taking into account the results of the structural analysis. Dropping the hydrogen bonding mechanism, phase separation does not occur anymore and the configurational constraints at the ends of the soft chains are reduced, leaving just those imposed by the rigid crosslinkers. This leads to a significant increase in cooperativity on approaching the glass transition, and to a complex behavior that is thoroughly discussed in comparison with those observed in the micro-segregated systems.

Download full-text PDF

Source
http://dx.doi.org/10.1039/c8sm01113cDOI Listing

Publication Analysis

Top Keywords

polyurea networks
8
hydrogen bonding
8
fast relaxation
8
configurational constraints
8
relaxation
6
interplay structure
4
structure relaxation
4
relaxation polyurea
4
networks point
4
point view
4

Similar Publications

Visually monitoring micro-crack initiation and corrosion failure evolution is crucial for early diagnosis of structural health and ensuring safe operation of infrastructures. However, existing damage detecting approaches are subject to the limited-detection of heterogeneous structures, intolerance of harsh environments, and challenge of quantitative analysis, impeding applications in structural health monitoring (SHM). Herein, we present a stretchable, semi-quantitative, instrument-free, supramolecular SHM sensor by integrating a polyurea elastomer with sensitive corrosion-probes, enabling localized corrosion monitoring and quantification of failure dynamics.

View Article and Find Full Text PDF

Preparation of Self-healing Thermoplastic Polysiloxane-Polyurea/Polyether-Polyurea Elastomer Blends with a Co-continuous Microphase Structure and In-Depth Research on Their Synergistic Effects.

ACS Appl Mater Interfaces

October 2024

Key Laboratory of Special Functional Aggregated Materials (Shandong University), Ministry of Education, School of Chemistry and Chemical Engineering, Shandong University, Jinan 250100, China.

Polymer blending has been an important method to create materials with specific properties that have synergistic effects. However, there are few reports on the mechanism of synergistic effects. It is well known that it is quite difficult to obtain ideal blends composed of nonpolar organosilicon polymers and polar polymers.

View Article and Find Full Text PDF

The cross-linked structures of most commodity polyurethanes (PUs) hinder their recycling by common mechanical/chemical approaches. Catalyzed dynamic carbamate exchange emerges as a promising PU recycling strategy, which converts traditional static PU thermosets into reprocessable covalent adaptable networks (CANs). However, this approach has been limited to thermoset-to-thermoset reprocessing of PU CANs, accompanied by their well-preserved network structures and extremely high viscosities, which pose challenges to processing and certain applications.

View Article and Find Full Text PDF

Actuators based on shape memory polymers and composites incorporating nanomaterial additives have been extensively studied; achieving both high output stress and precise shape change by low-cost, scalable methods is a long-term-desired yet challenging task. Here, conventional polymers (polyurea) and carbon nanotube (CNT) fillers are combined to fabricate reinforced composite fibers with exceptional actuation performance, by a wet-spinning method amenable for continuous production. It is found that a thermal-induced shrinkage step could obtain densified strong fibers, and the presence of CNTs effectively promotes the tensile orientation of polymer molecular chains, leading to much improved mechanical properties.

View Article and Find Full Text PDF

The development of environmentally sustainable processes for polymer recycling is of paramount importance in the polymer industry. In particular, the implementation of chemical recycling for thermoset polymers via covalent adaptable networks (CANs), particularly those based on the dynamic hindered urea bond (HUB), has garnered intensive attention from both the academic and industrial sectors. This interest stems from its straightforward chemical structure and reaction mechanism, which are well-suited for commercial polyurethane and polyurea applications.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!