Environmental management of cellulose production waste and municipal sewage sludge appears to be substantiated due to various physicochemical properties of these wastes. The aim of the conducted research was to determine the effect of cellulose production waste and sewage sludge on yielding and heavy metal uptake by a plant mixture. The research was conducted under field experiment conditions, determining the fertilizer value of these wastes in the environmental aspect. The research was carried out in the years 2013-2016. Species composition of the plant mixture was adjusted to habitat conditions. It was established that, as compared with the cellulose production waste, the municipal sewage sludge used in the experiment had a higher content of macroelements. The content of heavy metals in the studied waste did not exceed the limits that condition their use in agriculture and reclamation. Applying only the cellulose production waste did not significantly decrease the yield of the plants. Municipal sewage sludge showed the highest yield-forming effect. Mixing the above-mentioned wastes and their application to soil had a significant effect on the increase in the plant mixture yield. The waste applied to soil also increased the content of Cr, Cd, Pb, Cu, and Zn in the plant mix. The level of heavy metal content in the plant mix did not exclude this biomass from being used for fodder or reclamation purposes. The cellulose production waste and municipal sewage sludge increased the heavy metal uptake by the plant mixture. The plant biomass extracted heavy metals from the sewage sludge more intensively than from the cellulose production waste. Among the analyzed heavy metals, the highest phytoremediation was recorded for Ni (30%), followed by Cd (20%), Cr (15%), Pb (10%), and the lowest for Cu (9%) and Zn (8%). Application of the cellulose production waste and sewage sludge to soil also increased the content of the studied heavy metals in soil. However, it did not cause deterioration of soil quality standards. Heterogeneity in the chemical composition of the wastes confirms that each batch intended to be used for environmental management should be subjected to chemical control.
Download full-text PDF |
Source |
---|---|
http://dx.doi.org/10.1007/s11356-018-3109-5 | DOI Listing |
Physiol Plant
January 2025
Key Laboratory of Fruit Postharvest Biology, Liaoning Province; College of Horticulture, Shenyang Agricultural University, Shenyang, China.
Stone cells are one of the limiting factors affecting pear fruit quality and commodity value. The formation of stone cell is highly correlated with lignin deposition. However, the molecular mechanism of stone cell formation and regulation is still unclear.
View Article and Find Full Text PDFToxins (Basel)
January 2025
Multidisciplinary Agroindustry Research Laboratory, Carrera de Ingeniería en Construcción, Instituto de Ciencias Químicas Aplicadas, Universidad Autónoma de Chile, Talca 3460000, Chile.
Significant agro-industrial waste is produced during the winemaking process, including grape stalks, which are a rich source of the valuable biopolymer holocellulose that can be utilized for biotechnological processes. The purpose of this study was to delignify grape stalks in order to extract holocellulose. Then Lactobacillus plantarum (LP) was immobilized in the interstitial spaces of holocellulose and then coated with natural polymers (chitosan, Ch; and alginate, Al) to create the Holo-LP/Ch/Al complex.
View Article and Find Full Text PDFGels
January 2025
College of Food Science, Southwest University, Chongqing 400715, China.
Polysaccharide hydrocolloids have garnered increasing attention from consumers, experts, and food processing industries due to their advantages of abundant resources, favorable thickening properties, emulsification stability, biocompatibility, biodegradability, and high acceptance as food additives. This review focuses on the application of polysaccharide hydrocolloids and their beneficial roles in meat products by focusing on several commonly used polysaccharides (i.e.
View Article and Find Full Text PDFGels
January 2025
School of Product Design, University of Canterbury, Christchurch 8041, New Zealand.
This study investigates the 3D extrusion printing of a carboxymethyl cellulose (CMC)-gelatin complex coacervate system. Various CMC-gelatin coacervate hydrogels were prepared and analyzed to achieve this goal. The impact of the CMC-gelatin ratio, pH, and total biopolymer concentration on coacervation formation and rheological properties was evaluated to characterize the printability of the samples.
View Article and Find Full Text PDFGels
January 2025
Manufacturing and Mechanical Engineering Technology, Rochester Institute of Technology, Rochester, NY 14623, USA.
The field of tissue engineering has made significant advancements with extrusion-based bioprinting, which uses shear forces to create intricate tissue structures. However, the success of this method heavily relies on the rheological properties of bioinks. Most bioinks use shear-thinning.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!