Two-solution bone cements modified with ethylene glycol-dimethacrylate (EG-DMA) as a crosslinker have been developed as an attempt to further improve the mechanical properties of acrylic bone cement. The result of this study shows that EG-DMA can increase the mechanical properties and fractional monomer conversion while preserving the thermal characteristics. The strength and bending modulus increase with EG-DMA concentrations at 5-10 vol % EG-DMA. Substituting the EG-DMA content past 10 vol % decreases the bending properties due to the effects of reduced monomer concentrations. Strengthened EG-DMA samples demonstrated an increase in ductility with noticeably different fracture surface morphologies than the control samples, indicated by microtroughs and ridge formation caused by excessive plastic strain. This work provides insight into the effect of substituting a crosslinker for MMA monomer in an injectable two-solution system and lays out the ideal concentrations of EG-DMA for superior mechanical or fractional monomer conversion properties. © 2018 Wiley Periodicals, Inc. J. Biomed. Mater. Res. Part B, 2018. © 2018 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater 107B: 783-790, 2019.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1002/jbm.b.34172 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Oxygen-Passivated Sulfur Vacancies in Monolayer MoS for Enhanced Piezoelectricity.
ACS Nano
January 2025
School of Engineering, RMIT University, 124 La Trobe Street, Melbourne, Victoria 3001, Australia.
Modern-day applications demand onboard electricity generation that can be achieved using piezoelectric phenomena. Reducing the dimensionality of materials is a pathway to enhancing the piezoelectric properties. Transition-metal dichalcogenides have been shown to exhibit high piezoelectricity.
View Article and Find Full Text PDFAntimicrobial membranes based on polycaprolactone:pectin blends reinforced with zeolite faujasite for cloxacillin-controlled release.
Discov Nano
January 2025
National Nanotechnology Laboratory for Agriculture (LNNA), Embrapa Instrumentação, 1452 XV de Novembro St., São Carlos, SP, 13560-970, Brazil.
Multifunctional membranes applied to biomedical materials become attractive to support the biological agents and increase their properties. In this study, biopolymeric fibers based on polycaprolactone (PCL) and pectin (PEC) were reinforced with faujasite zeolite (FAU) for cloxacillin antibiotic (CLX) loading. FAU with a high specific surface area (347 ± 8 m g), high crystallinity and particles with a diameter of up to 100 nm were produced under optimized synthesis conditions (100 °C/4 h).
View Article and Find Full Text PDFArterial compliance (AC) is an important cardiovascular parameter characterizing mechanical properties of arteries. AC is significantly influenced by arterial wall structure and vasomotion, and it markedly influences cardiac load. A new method, based on a two-element Windkessel model, has been recently proposed for estimating AC as the ratio of the time constant T of the diastolic blood pressure decay and peripheral vascular resistance derived from clinically available stroke volume measurements and selected peripheral blood pressure parameters which are less prone to peripheral distortions.
View Article and Find Full Text PDFA review on hydroxyapatite fabrication: from powders to additive manufactured scaffolds.
Biomater Sci
January 2025
Department of Chemistry, Amrita Vishwa Vidyapeetham, Amritapuri, Kollam, India.
Hydroxyapatite (HA), the main inorganic bone component, is the most widely researched bioceramic for bone repair. This paper presents a comprehensive review of recent advancements in HA synthesis methods and their integration into additive manufacturing (AM) processes. Synthesis methodologies discussed include wet, dry, and biomimetic routes, emphasizing their impact on tailoring the physicochemical properties of HA for biomedical applications.
View Article and Find Full Text PDFThe influence of pectins and cellulose in the mechanical and adhesive properties of seed mucilage.
J Exp Bot
January 2025
Department of Functional Morphology and Biomechanics, Zoological Institute, Kiel University, Am Botanischen Garten 1-9, 24118 Kiel, Germany.
Several plant seeds release a mucilaginous envelope through hydration, rich in pectins and stabilized by cellulose fibers. This mucilage aids in seed protection, development, and adhesion for dispersal. This study aimed to separate the effects of pectins and cellulose fibers by using pectinase to remove mucilage pectins, leaving cellulose arrays, and performing wet and dry pull-off force measurements on seeds of three plant species: Salvia hispanica (Chia), Collomia grandiflora (Collomia) and Linum usitatissimum (Flax).
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!