The combined characteristics of non-wettabililty and strong plasmonic resonances make superhydrophobic plasmonic nanostructures an appealing tool for ultrasensitive detection in surface-enhanced Raman scattering (SERS). However, inducing superhydrophobic surfaces on originally hydrophilic metals (e.g., gold, silver) while achieving high plasmonic enhancement requires sophisticated surface engineering and often involves complex fabrication processes. In this article, we design and fabricate cost effective and scalable plasmonic nanostructures with both superhydrophobicity (a water contact angle >160°) and high SERS signal (enhancement factor ≈106). Silver-coated aluminum hydroxide nanotemplates are obtained from a simple wet process, followed by thermal evaporation of silver nanoparticles. We find that the largest SERS enhancement is obtained when the contact angle is maximum. This confirms that the control of surface wettability is an effective way to improve detection sensitivity in SERS measurements. The nanotemplates developed in this study could be applied further in various applications, including microfluidic biomolecular optical sensors, photocatalysts, and optoelectronic devices.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1039/c8nr04873h | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Scalable Fabrication of Light-Responsive Superhydrophobic Composite Phase Change Materials via Bionic-Engineered Wood for Solar-Thermal Energy Management.
Molecules
January 2025
Yunnan Provincial Key Laboratory of Energy Saving in Phosphorus Chemical Engineering and New Phosphorus Materials, Yunnan International Joint Laboratory of Sustainable Polymers, The Higher Educational Key Laboratory for Phosphorus Chemical Engineering of Yunnan Province, Faculty of Chemical Engineering, Kunming University of Science and Technology, Kunming 650500, China.
The growing demand for sustainable energy storage solutions has underscored the importance of phase change materials (PCMs) for thermal energy management. However, traditional PCMs are always inherently constrained by issues such as leakage, poor thermal conductivity, and lack of solar energy conversion capacity. Herein, a multifunctional composite phase change material (CPCM) is developed using a balsa-derived morphology genetic scaffold, engineered via bionic catechol surface chemistry.
View Article and Find Full Text PDFPlasmonics and superhydrophobicity have garnered broad interest from academics and industry alike, spanning fundamental scientific inquiry and practical technological applications. Plasmonic activity and superhydrophobicity rely heavily on nanostructured surfaces, providing opportunities for their mutually beneficial integration. Engineering surfaces at microscopic and nanoscopic length scales is necessary to achieve superhydrophobicity and plasmonic activity.
View Article and Find Full Text PDFSuperhydrophobic nanocellulose-based self-assembled flexible SERS substrates for pesticide detection.
Int J Biol Macromol
December 2024
Jiangsu Co-Innovation Center of Efficient Processing and Utilization of Forest Resources, International Innovation Center for Forest Chemicals and Materials, College of Light Industry and Food Engineering, Nanjing Forestry University, Nanjing 210037, China. Electronic address:
Flexible surface-enhanced Raman scattering (SERS) substrates that provide simple sampling are helpful for the on-site detection of explosive contamination, pesticide residues on food surfaces, and water pollution in public spaces. Using superhydrophobic nanocellulose-based film as the support, 2D flexible SERS substrates that integrated sampling, enrichment, and detection were successfully fabricated via the solvent-induced evaporation method. This approach enabled the co-loading of two plasmonic nanoparticles with different sizes and shapes.
View Article and Find Full Text PDFLiquid Interfacial Gating of Superhydrophobic Plasmonic Metal-Organic Frameworks for Three-in-One Separation, Enrichment, and Recognition in Bacterial Quorum Sensing.
ACS Appl Mater Interfaces
June 2024
China Light Industry Key Laboratory of Meat Microbial Control and Utilization, School of Food and Biological Engineering, Engineering Research Center of Bio-Process, Ministry of Education, Hefei University of Technology, Hefei 230009, P. R. China.
Poor adsorption properties of nonadsorbing targets and competing adsorption of nontargets at a liquid interface always hamper the development of interface sensing techniques. There is a need to fabricate materials that are applicable to various interface assemblies and, meanwhile, could be employed as interfacial gating to improve the performance of interface sensing by separating, enriching, and recognizing targets at the liquid interface. Here, superhydrophobic zeolite imidazole frameworks-8@gold nanoparticles-1H,1H,2H,2H-perfluorodecanethiol (ZIF-8@GNPs-PFDT) with a static water contact angle (WCA) of 155° was constructed via electrostatic self-assembly and surface graft modification.
View Article and Find Full Text PDFSweat Sensor Based on Wearable Janus Textiles for Sweat Collection and Microstructured Optical Fiber for Surface-Enhanced Raman Scattering Analysis.
ACS Sens
December 2023
Institute of Information Photonics Technology and Faculty of Science, Beijing University of Technology, Beijing 100124, China.
Wearable sweat sensors provide real-time monitoring of biomarkers, enabling individuals to gain real-time insight into their health status. Current sensors primarily rely on electrochemical mechanisms, limiting their capacity for the concurrent detection of multiple analytes. Surface-enhanced Raman scattering spectroscopy offers an alternative approach by providing molecular fingerprint information to facilitate the identification of intricate analytes.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!