Load-bearing capacity of lithium disilicate and ultra-translucent zirconias.

Objective: The aim of this study was to evaluate the load-bearing capacity of monolithic lithium disilicate (LiDi - IPS e.max CAD) and novel ultra-translucent zirconia restorative systems of various compositions: 5Y-PSZ (5 mol% yttria-partially-stabilized zirconia) and 4Y-PSZ (4 mol% yttria-partially-stabilized zirconia); relative to a 3Y-TZP (3 mol% yttria-stabilized zirconia) control.

Materials And Methods: Experiments were carried out with 10 disc specimens (Ø12 ×1 mm) per ceramic material. The zirconia intaglio surface (as machined) was sandblasted (50 µm AlO at 2 bar), while LiDi was etched with 5% HF for 20 s. The ceramic discs were then adhesively bonded onto a dentin-like substrate (G10, a high-pressure fiberglass material) using Multilink Automix cement and Monobond Plus primer, producing a ceramic/cement/dentin-like substrate trilayer structure. The bonded specimens were stored in water for 3 days at 37 °C prior to a Hertzian indentation flexural radial fracture test. The plate-on-foundation theory was used to validate the load-bearing capacity of the trilayer systems based on the flexural tensile stress at the ceramic intaglio (cementation) surface-a cause for bulk fracture of ceramic onlays.

Results: The experiment data showed that, when bonded to and supported by a dentin-like substrate, the load-bearing capacity of LiDi (872 N) is superior to the 5Y-PSZ (715 N) and can even reach that of 4Y-PSZ (864 N), while 3Y-TZP still holds the highest load-bearing capacity (1195 N). Theoretical analyses agree with experimental observations. The translucency of 5Y-PSZ approaches that of LiDi, which are superior to both 4Y-PSZ and 3Y-TZP.

Conclusions: When adhesively bonded to and supported by dentin, lithium disilicate exhibits similar load-bearing properties to 4Y-PSZ but much better than 5Y-PSZ.