Photocatalytic reduction of CO to CO and formate by a novel Co(ii) catalyst containing a cis-oxygen atom: photocatalysis and DFT calculations.

Dalton Trans

Key Laboratory of Materials Chemistry for Energy Conversion and Storage (Huazhong University of Science and Technology) of Ministry of Education, Hubei Key Laboratory of Material Chemistry and Service Failure, School of Chemistry and Chemical Engineering, Huazhong University of Science and Technology, Wuhan 430074, P. R. China. and Shenzhen Huazhong University of Science and Technology Research Institute, Shenzhen 518057, P. R. China.

Published: October 2018

The conversion of carbon dioxide (CO) to fuels or value-added chemicals by a photocatalytic system has recently been of growing research interest. One of the challenges is the development of new catalysts with high activity and low cost. Cobalt complexes have long been used as catalysts for the reduction of CO in either electrochemical or photochemical systems. Recently, a series of cis-Co complexes of tetradentate pyridine-amine ligands (N-ligands) exhibited high activity in the reduction of CO in homogeneous photocatalytic systems. However, only CO was obtained as the reduction product. In this regard, herein, we report a novel cis-Co complex C1 supported by an N ligand derivatized with TPA (TPA = tris(2-pyridylmethyl)amine). In contrast to the aforementioned Co catalysts, which contain two halogen atoms at cis-positions, C1 contains one oxygen atom at one cis-coordination site. The structure of C1 was fully characterized by MS, elemental analysis, and single-crystal X-ray diffraction. Experiments on the photocatalytic reduction of CO revealed that C1 is able to convert CO to not only CO but also formate in a homogeneous system containing C1 as a catalyst, Ir(ppy) as a photosensitizer, and triethylamine as an electron donor under visible-light irradiation. The catalytic activity and distribution of reduction products of this system are highly affected by the solvent environment. The presence of water in this system enhances the efficiency of 2H-to-H and CO-to-formate conversions. Electrochemical and steady-state emission quenching experiments indicate that photoinduced electron transfer from excited Ir(ppy) to C1 is thermodynamically feasible. A photogenerated Co species is suggested to be the active species involved in the reduction of CO and protons. DFT calculations were performed to elucidate the catalytic pathways of the formation of CO, formate, and H in this system; four pathways, namely, one for the formation of CO, one for the formation of hydrogen, and two for the formation of formate, were suggested. The results revealed that the oxygen atom at the cis-coordination site in C1 plays an important role in stabilizing the transition state during the transformation of CO at the cobalt center.

Download full-text PDF

Source
http://dx.doi.org/10.1039/c8dt02148aDOI Listing

Publication Analysis

Top Keywords

photocatalytic reduction
8
dft calculations
8
high activity
8
oxygen atom
8
atom cis-coordination
8
cis-coordination site
8
pathways formation
8
formation formate
8
reduction
6
system
5

Similar Publications

Herein, we first report a photocatalytic OCM using CO2 as a soft oxidant for C2H6 production under mild conditions, where an efficient photocatalyst with unique interface sites is constructed to facilitate CO2 adsorption and activation, while concurrently boosting CH4 dissociation. As a prototype, the Au quantum dots anchored on oxygen-deficient TiO2 nanosheets are fabricated, where the Au-Vo-Ti interface sites for CO2 adsorption and activation are collectively disclosed by in situ Kelvin probe force microscopy, quasi in situ X-ray photoelectron spectroscopy and theoretical calculations. Compared with single metal site, the Au-Vo-Ti interface sites exhibit the lower CO2 adsorption energy and decrease the energy barrier of the *CO2 hydrogenation step from 1.

View Article and Find Full Text PDF

1D Covalent Organic Frameworks with Tunable Dual-Cobalt Synergistic Sites for Efficient CO Photoreduction.

Macromol Rapid Commun

December 2024

Key Laboratory of Synthetic and Biological Colloids, Ministry of Education, School of Chemical and Material Engineering, Jiangnan University, Wuxi, 214122, China.

Diatomic catalysts enhance photocatalytic CO reduction through synergistic effects. However, precisely regulating the distance between two catalytic centers to achieve synergistic catalysis poses significant challenges. In this study, a series of one-dimensional (1D) covalent organic frameworks (COFs) are designed with adjustable micropores to facilitate efficient CO photoreduction.

View Article and Find Full Text PDF

The industrial sector faces a significant challenge in finding the highly effective and efficient treatments for harmful dye-based color effluents. In this study, pure and cobalt doped barium hexaferrite of chemical formula, BaCoFeO (x = 0-0.06) are made via sol-gel auto-combustion (SC) methodology.

View Article and Find Full Text PDF

Multi-heterointerface charge transfer in amine-functionalized cadmium sulfide-copper sulfide@titanium dioxide hollow spheres with rich oxygen vacancies for carbon dioxide photoreduction.

J Colloid Interface Sci

December 2024

Key Laboratory of Functional Inorganic Material Chemistry, Ministry of Education of the People's Republic of China, Heilongjiang University, Harbin 150080, PR China. Electronic address:

Photocatalytically reducing CO into high-value-added chemical materials has surfaced as a viable strategy for harnessing solar energy and mitigating the greenhouse effect. But the inadequate separation of the photogenerated electron-hole pair remains a major obstacle to CO photoreduction. Constructing heterostructure photocatalysts with efficient interface charge transfer is a promising approach to solving the above problems.

View Article and Find Full Text PDF

Constructing an Isopolymolybdate-Based Bifunctional Photocatalyst for Promoting Nitroaromatic Reduction and C-H Oxidation.

Inorg Chem

December 2024

Henan Key Laboratory of Polyoxometalate Chemistry, College of Chemistry and Molecular Sciences, Henan University, Kaifeng, Henan 475004, P. R. China.

Amide compounds are widely present in drug molecules and natural products, which can be synthesized by acid-amine condensation. It is urgent to design new photocatalysts for achieving both nitroaromatic reduction and C-H oxidation to obtain raw materials, carboxylic acids, and aromatic amines. Herein, a novel isopolymolybdate-incorporated photoactive metal-organic framework, -TPT, was constructed by combining the oxidation catalyst [MoO], Ni(II) cation, and photosensitive ligand 2,4,6-tri(4-pyridyl)-1,3,5-triazine (TPT).

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!