Coal fly ash (CFA), a by-product from coal-fired power plants, has many applications. However, there are concerns that the trace elements in CFA-based materials may contaminate groundwater. Therefore, many methods have been developed to rapidly measure these trace elements in CFA in order to management and/or screening their leachability. However, satisfactory methods to measure boron alone have not been reported. In this study, we developed an instrument for the non-contact analysis of boron in CFA samples. This simple instrument consisted of a sealed neutron source, a moderator, a proportional counter, and a signal processing device. The analysis method, based on thermal neutron absorptiometry, can rapidly measure the boron content within five minutes without pre-treatment. We applied the developed equipment to over 200 CFA samples, and excellent correlation was obtained between the proposed and traditional methods. These results indicated that the developed equipment is useful for managing and/or screening boron in CFA.
Download full-text PDF |
Source |
|---|---|
| http://www.ncbi.nlm.nih.gov/pmc/articles/PMC6111023 | PMC |
| http://dx.doi.org/10.1016/j.heliyon.2018.e00752 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Deamination mechanism of modified magnesium slag using wet aging and its performance evolution as backfill material.
J Environ Manage
January 2025
School of Business, Xi'an University of Finance and Economics, Xi'an, 710100, China.
The purpose of this study is to solve the problem of ammonia (NH) release when modified magnesium slag (MMS) is used as coal mine backfill cementitious material, and to explore its chemical mechanism and put forward effective solutions. Uniaxial compressive strengths (UCS) hydration kinetics, scanning electron microscope (SEM), and thermogravimetric analysis-derivative thermogravimetry (TG-DTG), X-ray diffractometer (XRD) and other testing methods were used to study the evolution of the properties of MMS-based backfill material, which provided a scientific basis for the safe utilization of MMS. First, the chemical mechanism underlying the release of NH from MMS was identified, and it was confirmed that MgN and LiN are the main nitrogen sources.
View Article and Find Full Text PDFUtilization of municipal solid waste incineration fly ash with different pretreatments with gold tailings and coal fly ash for environmentally friendly geopolymers.
Waste Manag
January 2025
Qilu University of Technology (Shandong Academy of Sciences), Advanced Materials Institute, Shandong Engineering Research Centre of Municipal Sludge Disposal, Jinan 250014, China. Electronic address:
Municipal solid waste incineration fly ash (MSWIFA) is considered a hazardous solid waste, traditionally disposed by solidified landfill methods. However, solidified landfills present challenges with leaching heavy metals, polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs). To address this issue, this study examined two pretreatment methods for MSWIFA: sintering at 850℃ for 30 min and washing with three water baths (20 min each) at a 3:1 liquid-solid ratio.
View Article and Find Full Text PDFMechanical Properties and Durability Performance of Low Liquid Limit Soil Stabilized by Industrial Solid Waste.
Materials (Basel)
January 2025
Cangzhou Municipal Engineering Company Limited, Cangzhou 061000, China.
To improve the mechanical and durability properties of low liquid limit soil, an eco-friendly, all-solid, waste-based stabilizer (GSCFC) was proposed using five different industrial solid wastes: ground granulated blast-furnace slag (GGBS), steel slag (SS), coal fly ash (CFA), flue-gas desulfurization (FGD) gypsum, and carbide slag (CS). The mechanical and durability performance of GSCFC-stabilized soil were evaluated using unconfined compressive strength (UCS), California bearing ratio (CBR), and freeze-thaw and wet-dry cycles. The Rietveld method was employed to analyze the mineral phases in the GSCFC-stabilized soil.
View Article and Find Full Text PDFInvestigating and Evaluating Novel Fly Ash-Based Proppant Compressive Strength Under Various Environmental Conditions.
Materials (Basel)
January 2025
Department of Petroleum and Energy Engineering, The American University in Cairo, New Cairo 11835, Egypt.
As hydraulic fracturing becomes increasingly prevalent in the oil and gas industry, there is a growing need to develop more cost-effective and sustainable technologies, particularly concerning the materials used. Proppants play a vital role in hydraulic fracturing by ensuring that fractures remain conductive and can withstand the pressure exerted by the surrounding strata. One key parameter for evaluating proppants is their compressive strength, especially under harsh environmental conditions.
View Article and Find Full Text PDFApplication of modified solidified soil in in-situ backfilling of coal gangue: evaluation of arsenic stabilization effect and mechanism study.
Environ Geochem Health
January 2025
School of Chemical & Environmental Engineering, China University of Mining and Technology-Beijing, Beijing, 100083, China.
As a typical ecologically fragile area, the Wudong Coal Mine region in Xinjiang generates large accumulations of coal gangue each year, which, in the alkaline soil environment, can easily lead to significant leaching and accumulation of As. This study developed a stabilizer (CFD) using cement, fly ash, and desulfurized gypsum to modify in-situ soil in the Xinjiang mining area, resulting in a modified solidified soil with excellent geotechnical performance and As stabilization capability. The study results showed that when CFD content exceeded 14.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!