Instability of ultrathin surface oxides on alloys under environmental conditions can limit the opportunities for applications of these systems when the thickness control of the insulating oxide film is crucial for device performance. A procedure is developed to directly deposit self-assembled monolayers (SAM) from solvent onto substrates prepared under ultra-high vacuum conditions without exposure to air. As an example, rhenium photosensitizers functionalized with carboxyl linker groups are attached to ultrathin alumina grown on NiAl(1 1 0). The thickness change of the oxide layer during the SAM deposition is quantified by x-ray photoelectron spectroscopy and can be drastically reduced to one atomic layer. The SAM acts as a capping layer, stabilizing the oxide thin film under environmental conditions. Ultraviolet photoelectron spectroscopy elucidates the band alignment in the resulting heterostructure. The method for molecule attachment presented in this manuscript can be extended to a broad class of molecules vulnerable to pyrolysis upon evaporation and presents an elegant method for attaching molecular layers on solid substrates that are sensitive to air.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1088/1361-648X/aaddd3 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Effect of Interface Passivation on the Performance of the CuZnSnS Solar Cells.
ACS Omega
December 2024
Department of Electrical and Photonics Engineering, Technical University of Denmark, Roskilde 4000, Denmark.
Article Synopsis
- This study focuses on how a thin aluminum oxide (AlO) layer improves the efficiency of kesterite CuZnSnS (CZTS) solar cells by applying it at the CZTS/Mo interface through atomic layer deposition (ALD).
- The optimal thickness of the AlO layer is found to be between 1-2.5 nm, which leads to over a 30% increase in solar cell efficiency by enhancing open-circuit voltage and short-circuit current while reducing interface recombination.
- However, using a thicker AlO layer can decrease efficiency due to increased series resistance and challenges in hole extraction, highlighting the need for careful thickness control to maximize performance.
Localized Morphological Modulation of Ultrathin Magnetic Nanosheets via a Strategically Designed Reduction Approach.
Small
December 2024
Key Laboratory of Bio-Inspired Smart Interfacial Science and Technology of Ministry of Education, School of Chemistry, Beihang University, Beijing, 100191, P. R. China.
2D inorganic nanomaterials have attracted considerable research interest owing to their exceptional physical and chemical properties. Nonetheless, achieving precise control over the morphology of 2D nanomaterials presents a significant challenge, primarily due to their elevated surface energy and the stringent requirements for growth control. In this study, a designed reduction technique is employed to finely tune the morphology of 2D nanosheets, with iron salts serving as morphology-directing agents.
View Article and Find Full Text PDFProspects of Improving Efficiency and Stability of Hybrid Perovskite Solar Cells by Alumina Ultrathin Films.
Small
November 2024
Applied Physics and Semiconductor Spectroscopy, Brandenburg University of Technology Cottbus-Senftenberg, Konrad-Zuse-Straße 1, 03046, Cottbus, Germany.
Article Synopsis
- The study investigates how low-temperature atomic layer deposited alumina (ALD-AlO) affects hybrid perovskites and their solar cell efficiency and stability.
- ALD-AlO enhances charge transfer and lifetime of perovskite solar cells (PSCs) due to its intrinsic defect states and also prevents mobile ion migration, which helps reduce current-voltage hysteresis.
- This method is cost-effective, quick, and compatible with solar cell technology, making it a promising solution for boosting PSC performance and marketability.
Fabrication of Ultrathin Ferroelectric AlScN Films under Complementary-Metal-Oxide-Semiconductor Compatible Conditions by using HfN Electrode.
Adv Mater
January 2025
Department of Materials Science and Engineering and Inter-University Semiconductor Research Center, Seoul National University, Seoul, 08826, South Korea.
Article Synopsis
- - Aluminum scandium nitride (AlScN) shows great potential for future ferroelectric memories due to its high remanent charge density, but it requires thinner films to reduce the high coercive field for lower operating voltages.
- - Thinner films encounter issues with significant leakage currents, which complicate their compatibility with existing CMOS fabrication methods.
- - This study introduces a HfN bottom electrode that minimizes lattice mismatch and reduces leakage currents, allowing for a CMOS-compatible HfN/ASN/TiN structure that showcases ferroelectric properties even at thicknesses of 3 nm and decreases the coercive voltage to 4.35 V.
Pop the bubbles and let the current flow: mechanochemistry of micron and nano-sized openings in dielectric layers.
Sci Rep
November 2024
Hasselt University, imo-imomec, Martelarenlaan 42, 3500, Hasselt, Belgium.
Article Synopsis
- Thin dielectric layers are essential in technologies like capacitors and solar cells, and this study focuses on creating openings in these layers using a specific technique involving alkali metal salts.
- The process relies on having excess methyl groups, selenium, and alkali metals, along with a minimum annealing temperature to facilitate the formation of nano- and micron-sized openings.
- The research illustrates that heavier alkali halide salts allow for this process to occur at lower temperatures, presenting a thermodynamic explanation that could enhance the efficiency of applications in photovoltaics and MEMS.
Want AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!