Fast Von Mises strain imaging on ultrasound carotid vessel wall by flow driven diffusion method.

Australas Phys Eng Sci Med

Key Laboratory of Biomedical Information Engineering, Ministry of Education, Department of Biomedical Engineering, School of Life Science and Technology, Xi'an JiaoTong University, Xi'an, 710049, People's Republic of China.

Published: September 2018

The elasticity of the vessel wall is important for the clinical identification of rupture-risks. The Von Mises strain can be a potential index for the indication of carotid vessel pathologies. In this paper, a fast clinically applicable real-time algorithm from time-sequence of B-mode carotid images is developed. Due to the compression induced by the normal cardiac pulsation, tissue motion occurs radially and non-rigidly. To obtain an accurate motion field, we developed a variational functional integrating the optical flow equation and an anisotropic regularizer, and designed a diffusion tensor to encourage coherence diffusion. The motion field is smoothed along the desired motion flow orientation. A fast, additive operator splitting scheme, which is ten times faster than the conventional discrete method, is used for the numerical implementation. To demonstrate the efficiency of the proposed approach, finite element models are set up for normal and pathological carotid vessel walls. The results indicate that the proposed diffusion approach obtains an accurate smooth and continuous motion field and greatly improves the follow up strain estimation using a fast differential strain filter. Furthermore, our approach using the Von Mises strain imaging on clinical ultrasound images of the carotid artery is validated. Participants above 65-years in age suffering from different stages of atherosclerosis in their carotid artery are selected. The results are evaluated by an experienced physician. The evaluation results demonstrate that the Von Mises strain has a good correspondence to the presence of certain suspicious areas in the B-mode images. The proposed method is therefore clinically applicable for the real-time Von Mises strain imaging of carotid vessel walls, and can be of great value as a complementary method to B-mode image for the clinical identification of the risk of plaque vulnerability.

Download full-text PDF

Source
http://dx.doi.org/10.1007/s13246-018-0662-7DOI Listing

Publication Analysis

Top Keywords

von mises
20
mises strain
20
carotid vessel
16
strain imaging
12
motion field
12
vessel wall
8
clinical identification
8
clinically applicable
8
applicable real-time
8
vessel walls
8

Similar Publications

Objectives: To assess the effect of occlusion and implant number/position on stress distribution in Kennedy Class II implant-assisted removable partial denture (IARPD).

Materials And Methods: IARPDs were designed in six models: with one implant (bone level with a platform of 4 mm and length of 10 mm) at the site of (I) canine, (II) between first and second premolars, (III) first molar, (IV) second molar, or two implants at the sites of (V) canine-first molar, and (VI) canine-second molar. A conventional RPD served as control.

View Article and Find Full Text PDF

Background: Zygomatic implants are becoming an ideal treatment approach for implant-supported prosthesis treatment developed for the atrophic maxilla. This study aims to evaluate the amount and distribution of stress in implants and peri-implant bone using different implant-supported prosthesis configurations in Aramany Class I maxillary defects through 3-dimensional finite element analysis.

Methods: A 3-dimensional finite element model of the Aramany class I defect was created.

View Article and Find Full Text PDF

This study numerically investigates the impact of different loading modes on the biomechanical response of an osseointegrated dental implant. While finite element modeling is commonly employed to investigate the mechanical behavior of dental implants, several models lack physiological accuracy in their loading conditions, omitting occlusal contact points that influence stress distribution in periimplant bone. Using 3D finite element modeling and analysis, stress distributions at the bone-implant interface are evaluated under both physiological loading, incorporating natural occlusal contact points, and non-physiological loading conditions, with a focus on load transmission mechanisms and the potential risk of bone overloading.

View Article and Find Full Text PDF

Background: The mechanical properties of framework materials significantly influence stress distribution and the long-term success of implant-supported prostheses. Although titanium, cobalt-chromium, zirconia, and polyether ether ketone (PEEK) are widely used, their biomechanical performance under dynamic loading conditions remains insufficiently investigated. This study aimed to evaluate the biomechanical behavior of four framework materials with different Young's modulus using dynamic finite element stress analysis.

View Article and Find Full Text PDF

Background: This study assessed stress distributions in simulated mandibular molars filled with various materials after the removal of fractured instruments from the apical thirds of the root canals.

Methods: Finite element models of the mesial and distal root canals were created, where fractured instruments were assumed to be removed using a staging platform established with a modified Gates-Glidden bur (Woodpecker, Guangxi, P.R.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!