We have developed conductive microstructures using micropatternable and conductive hybrid nanocomposite polymer. In this method carbon fibers (CFs) were blended into polydimethylsiloxane (PDMS). Electrical conductivities of different compositions were investigated with various fiber lengths (50-250 μm), and weight percentages (wt%) (10-60 wt%). Sample composites of 2 cm × 1 cm × 500 μm were fabricated for 4-point probe conductivity measurements. The measured percolation thresholds varied with length of the fibers: 50 wt% (307.7 S/m) for 50 µm, 40 wt% (851.1 S/m) for 150 µm, and 30 wt% (769.23 S/m) for 250 μm fibers. The conductive composites showed higher elastic modulus when compared to that of PDMS.
Download full-text PDF |
Source |
|---|---|
| http://www.ncbi.nlm.nih.gov/pmc/articles/PMC6097983 | PMC |
| http://dx.doi.org/10.1038/s41598-018-30846-3 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Integrating ex situ biomimetic extraction analyses into contaminated sediment assessment and management decisions.
Integr Environ Assess Manag
January 2025
Department of Civil, Environmental, and Construction Engineering, Texas Tech University, Lubbock, TX, United States.
This study evaluated a novel ex situ passive sampling biomimetic extraction (BE) method to estimate toxic potency in sediments. Gas chromatography with flame ionization detection (GC-FID) analysis of polydimethylsiloxane fibers equilibrated with field sediments was used to quantify bioavailable polyaromatic hydrocarbons (PAHs) and other unresolved, site-specific contaminant mixtures. This method is biomimetic because contaminants partition to the fiber based on hydrophobicity and abundance, and GC-FID quantification accounts for all constituents absorbed to the fiber that may contribute to toxicity.
View Article and Find Full Text PDFEnvironmental and Economic Assessment of Wind Turbine Blade Recycling Approaches.
ACS Sustain Resour Manag
January 2025
Sandia National Laboratories, Albuquerque, New Mexico 87123, United States.
Wind energy offers a low emission source of energy while also being among the cheapest forms of electricity generation in the United States. While most materials in a wind turbine can be recycled at the end of their life, large composite blades are often treated as waste, leading to potential strains on regional landfills, a loss of durable materials, and forfeiture of embodied energy. Numerous approaches exist for recycling composite wind blades at various levels of technological and commercial maturity.
View Article and Find Full Text PDFThis paper employed a two-color double-pulse femtosecond laser (TDFL) technology for surface processing of carbon fiber reinforced polymers (CFRP). By exploring the changes in ablation thresholds for resin and carbon fiber under varying wavelengths and pulse numbers, optimal wavelength combinations were identified. Adjustments to processing parameters and pulse delay enabled precise removal of the CFRP surface, targeting resin while causing no damage to the underlying carbon fibers.
View Article and Find Full Text PDFPutrescine is a kind of physical diamine that is closely related to food deterioration and food quality safety. This study employs a novel fiber optic biosensor based on S-tapered and waist extension techniques, as well as localized surface plasmon resonance (LSPR), to detect putrescine accurately. The gold nanoparticles (AuNPs) are fixed on the fiber to excite LSPR.
View Article and Find Full Text PDFAnisotropic hydrogel microelectrodes for intraspinal neural recordings in vivo.
Nat Commun
January 2025
Department of Biomedical Engineering, State University of New York at Binghamton, Binghamton, NY, 13902, USA.
Creating durable, motion-compliant neural interfaces is crucial for accessing dynamic tissues under in vivo conditions and linking neural activity with behaviors. Utilizing the self-alignment of nano-fillers in a polymeric matrix under repetitive tension, here, we introduce conductive carbon nanotubes with high aspect ratios into semi-crystalline polyvinyl alcohol hydrogels, and create electrically anisotropic percolation pathways through cyclic stretching. The resulting anisotropic hydrogel fibers (diameter of 187 ± 13 µm) exhibit fatigue resistance (up to 20,000 cycles at 20% strain) with a stretchability of 64.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!