In this study, two previously identified isolates, i.e. Comamonas aquatica (BF-3) and Bacillus sp. BF-2, were determined to be suitable candidates to utilise in a bioflocculant-supported dissolved air flotation (Bio-DAF) system as a pretreatment system for poultry slaughterhouse wastewater (PSW). A 2% (v/v) (bioflocculant:PSW) strategy was used for the DAF to reduce total suspended solids (TSS), lipids and proteins in the PSW, by supplementing the bioflocculants produced and the co-culture (C. aquatica BF-3 and Bacillus sp. BF-2) directly into the DAF. The Bio-DAF was able to reduce 91% TSS, 79% proteins and 93% lipids when the DAF system was operating at steady state, in comparison with a chemical DAF operated using 2% (v/v) alum that was able to only reduce 84% TSS, 71% proteins and 92% lipids. It was concluded that the Bio-DAF system worked efficiently for the removal of suspended solids, lipids and proteins, achieving better results than when alum was used.
Download full-text PDF |
Source |
---|---|
http://dx.doi.org/10.2166/wst.2018.324 | DOI Listing |
ACS Appl Mater Interfaces
January 2025
Division of Micro and Nanosystems, KTH Royal Institute of Technology, Malvinas väg 10, Stockholm 100 44, Sweden.
Solid-state nanopores offer unique possibilities for biomolecule sensing; however, scalable production of sub-5 nm pores with precise diameter control remains a manufacturing challenge. In this work, we developed a scalable method to fabricate sub-5 nm nanopores in silicon (Si) nanomembranes through metal-assisted chemical etching (MACE) using gold nanoparticles. Notably, we present a previously unreported self-limiting effect that enables sub-5 nm nanopore formation from both 10 and 40 nm nanoparticles in the 12 nm thick monocrystalline device layer of a silicon-on-insulator substrate.
View Article and Find Full Text PDFFood Chem X
January 2025
Research Center for Applied Zoology, National Research and Innovation Agency Republic of Indonesia, P.O. Box 16911, Bogor, Indonesia.
Indonesia, one of the largest tropical forests, offers a diverse range of nectar sources that contribute to the unique characteristics of forest honey. This study aims to investigate physicochemical and antioxidant properties of forest honey from three distinct regions of Indonesia. Key physicochemical parameters include moisture, color, electrical conductivity (EC), total dissolved solids (TDS), total suspended solids (TSS), density, diastase number (DN), hydroxymethylfurfural (HMF), pH, total acidity, ash content, protein content, and reducing sugars.
View Article and Find Full Text PDFMar Pollut Bull
January 2025
Institute of Aquatic Ecology, HUN-REN Centre for Ecological Research, Karolina út 29-31, H-1113 Budapest, Hungary; National Laboratory for Water Sciences and Water Security, Institute of Aquatic Ecology, HUN-REN Centre for Ecological Research, Karolina út 29-31, H-1113 Budapest, Hungary; Institute of Chemistry, Eötvös Loránd University, Pázmány Péter sétány 1/A, H1113 Budapest, Hungary. Electronic address:
Microplastics (MPs) are an emerging environmental concern, but studies on these contaminants, particularly in river ecosystems, remain scarce. Research has indicated that MPs in the environment are predominantly microfibers (MFs); however, a few studies suggest that the MFs encountered are chiefly of natural origin. In this study, we aimed to improve the understanding of MP/MFs (both plastic and natural), among microparticle (solid particles >10 μm to <5000 μm; mainly of plastic as well as natural origin) loads in the Tiber River, Italy, by analyzing the physicochemical properties of surface water and assessing the abundance and characteristics of MPs-MFs at three sites: Ponte Grillo, Aniene, and Magliana, along a 60 km stretch.
View Article and Find Full Text PDFACS Appl Mater Interfaces
January 2025
Division of Micro and Nanosystems (MST), School of Electrical Engineering and Computer Science (EECS), KTH Royal Institute of Technology, Stockholm SE-10044, Sweden.
Controlled breakdown has emerged as an effective method for fabricating solid-state nanopores in thin suspended dielectric membranes for various biomolecular sensing applications. On an unpatterned membrane, the site of nanopore formation by controlled breakdown is random. Nanopore formation on a specific site on the membrane has previously been realized using local thinning of the membrane by lithographic processes or laser-assisted photothermal etching under immersion in an aqueous salt solution.
View Article and Find Full Text PDFInt J Biol Macromol
January 2025
Advanced Membrane Technology Research Centre (AMTEC), Universiti Teknologi Malaysia, 81310 UTM Johor Bahru, Johor, Malaysia.
This study focuses on the development of an efficient membrane-based clarification process to enhance the performance of subsequent ultrafiltration and produce high-quality sweet lime juice. A range of casting solutions were prepared using a blend of pore-forming polymers, including polyvinylpyrrolidone (PVP), polyvinylidene fluoride (PVDF), and cellulose acetate (CA), dissolved in dimethylformamide (DMF) solvent through the phase inversion technique. To further enhance the membrane's performance, four biopolymers poly (lactic acid) (PLA), xanthan gum, chitosan, and gelatin were incorporated, with and without clay, to refine its structure, porosity, and surface properties.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!