This study aimed to evaluate the parameters that influence the water absorption and drip of chicken carcasses due to the processing and pre-cooling of the meat in an industrial chiller. A total of 1,179 chickens were sampled during industrial processing to evaluate the influence of variables, validate the parameters, and conduct histological analysis. The best parameters for guaranteeing absorption levels and drip tests within acceptable limits on chicken carcasses were total residence time of 60 min (in the pre-chiller, chiller 1, and chiller 2); air pressure of chillers at 0.5 bar; the abdominal opening of carcasses at a maximum of 2 cm. These parameters did not influence the protein content, moisture/protein ratio, pH, or lipid content. The validation of the parameters and the histological analysis performed after each cooling stage showed that the most significant structural changes occurred in the pre-chiller, where the temperature of carcasses and water was higher, which contributes to greater absorption.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.3382/ps/pey311 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Application of thermally assisted high hydrostatic pressure to modify sorghum starch: multi-scale structure, techno-functional properties and digestibility.
J Food Sci Technol
January 2025
Department of Food Engineering and Technology, School of Food Engineering, Universidade Estadual de Campinas (UNICAMP), Monteiro Lobato 80, 6121, Campinas, SP 3083-862 Brazil.
Unlabelled: The effects of high hydrostatic pressure (HHP) (400-650 MPa) and holding temperature (25-50 °C) in thermally assisted HHP processing on multi-scale structure of starch (granule, crystalline and molecular), techno-functional properties, and digestibility of sorghum starch (SS) were evaluated. Response surface methodology has verified that the process impact on the modification of SS was dependent primarily on the pressure level. As HHP increased, processed SS progressively lost their granular structure and Maltese cross, indicating gradual structural disorder within the granules.
View Article and Find Full Text PDFEffect of nutrient-rich quinoa fraction composite wheat flour on product development.
J Food Sci Technol
January 2025
Department of Flour Milling Baking and Confectionery Technology, Central Food Technological Research Institute, (Council of Scientific and Industrial Research), Mysore, 570020 India.
To study the characteristics of bread by incorporating nutrient-rich quinoa flour as a new source for product development. Wheat flour was replaced by fractionated quinoa flour in different variations from 0%QF to 20%QF: 0%, 5%, 10%, 15%, and 20% WQF blends, respectively. Physicochemical studies resulted in higher protein and fiber content for the higher blend.
View Article and Find Full Text PDFThis work aimed at addressing the problem of hexavalent chromium pollution in the water environment, designing and preparing the Cu/CuO/NH-MIL-88B (Fe) heterojunction material with NH-MIL-88B (Fe) as the carrier, Cu/CuO was loaded on NH-MIL-88B (Fe) by light-assisted reduction. The loading of CuO effectively improves the visible light absorption capacity of the composite material. The SPR effect of Cu improves the separation and transfer of photogenerated carriers in the composite material.
View Article and Find Full Text PDFComparative Evaluation of pH, Calcium Ion Release, and Setting Time of Premixed and Freshly Mixed Tricalcium Silicate-based Endodontic Materials: An Study.
Int J Clin Pediatr Dent
December 2024
Department of Pedodontics and Preventive Dentistry, Vivekanandha Dental College for Women, Namakkal, Tamil Nadu, India.
Background And Objective: During the last 200 years, there have been many changes in the way of performing endodontic treatment. The increased demand from patients for saving their teeth has led to the development of various innovative equipment and advances in the field of material sciences. Thus, the standard protocol of endodontic treatment has undergone several modifications.
View Article and Find Full Text PDFInvestigation of cyclic water infiltration and dry-out in coated spruce using finite-element simulations.
Wood Sci Technol
January 2025
TU Wien, Institute for Mechanics of Materials and Structures, Karlsplatz 13, Vienna, 1040 Austria.
Unlabelled: Accurate prediction of moisture distributions in wood is among the most critical challenges in timber engineering. Achieving this requires a well-coordinated comparison of experimental methods and simulation tools. While significant progress has been made in developing simulation tools in recent years, a lack of experience with and trust in these tools continues to hinder broader implementation, especially when it comes to free water and its absorption.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!