In this article, we fabricated a sensitive near-infrared (NIR) light detector by directly coating a layer of Cs-doped FAPbI perovskite film onto vertical Si nanowire (SiNW) array. The as-assembled SiNW array/perovskite core-shell heterojunction exhibits a typical rectifying characteristic in darkness and distinct photoresponse characteristics under light illumination. Owning to the remarkable photovoltaic effect, the heterojunction can work as a self-driven NIR detector without an exterior energy supply. Further photoresponse investigation reveals that the photodetector is sensitive in a wide wavelength range with maximum sensitivity at ∼850 nm. The responsivity ( R) and specific detectivity ( D*) are estimated to be 14.86 mA W and 2.04 × 10 Jones at 0 V bias, respectively, which can be improved to 844.33 mA W and 3.2 × 10 Jones at a bias voltage of -0.9 V. In addition, the present device also possesses distinct advantages of a large I/ I ratio exceeding 10, swift response rate with rise/decay times of 4/8 μs, and relatively good ambient stability. According to our numerical simulation based on finite element method, the superior device performance is associated with strong light-trapping effect in such unique core-shell heterojunction array.
Download full-text PDF |
Source |
---|---|
http://dx.doi.org/10.1021/acsami.8b08387 | DOI Listing |
ACS Sens
January 2025
School of Materials Science and Engineering, Harbin Institute of Technology, Harbin 150001, P. R. China.
An effective long-term nitrogen dioxide (NO) monitoring at trace concentration is critical for protecting the ecological environment and public health. Tellurium (Te), as a recently discovered 2D elemental material, is promising for NO detection because of its suitable band structure for gas adsorption and charge mobility. However, the high activity of Te leads to poor stability in ambient and harsh conditions, limiting its application as a gas-sensitive material.
View Article and Find Full Text PDFMaterials (Basel)
December 2024
Department of Chemical and Materials Engineering, National Kaohsiung University of Science and Technology, Kaohsiung 807, Taiwan.
This study employed a hydrothermal method to coat CuS onto PbS quantum dots loaded with ZnO, resulting in a core-shell-structured (PbS/ZnO)@CuS hetero-structured photocatalyst. The sulfide coating enhanced the photocatalyst's absorption in the near-infrared to visible light range and effectively reduced electron-hole (h) pair recombination during photocatalytic processes. Electron microscopy analysis confirmed the successful synthesis of this core-shell structure using polyvinylpyrrolidone (PVP); however, the spatial hindrance effect of PVP led to a disordered arrangement of the CuS lattice, facilitating electron-hole recombination.
View Article and Find Full Text PDFChem Sci
December 2024
College of Chemistry and Pharmaceutical Engineering, Nanyang Normal University Nanyang 473601 P. R. China
The conversion of carbon dioxide (CO) into carbon-neutral fuels using solar energy is crucial for achieving energy sustainability. However, the high carrier charge recombination and low CO adsorption capacity of the photocatalysts present significant challenges. In this paper, a TAPB-COF@ZnInS-30 (TAPB-COFZ-30) heterojunction photocatalyst was constructed by growth of ZnInS (ZIS) on a hollow covalent organic framework (HCOF) with a hollow core-shell structure for CO to CO conversion.
View Article and Find Full Text PDFChemphyschem
January 2025
Friedrich-Schiller-University Jena, Institute of Physical Chemistry, Helmholtzweg 4, 7743, Jena, GERMANY.
The design and development of particulate photocatalysts has been an attractive strategy to incorporate earth-abundant metal ions to water splitting devices. Herein, we synthesized CoFe-Prussian blue (PB) coated ZnO origami core-shell nanostructures (PB@ZnO) with different mass ratio of PB components and investigated their photocatalytic water oxidation activities in the presence of an electron scavenger. Photocatalytic experiments reveal that the integration of PB on ZnO boosts the oxygen evolution rate by a factor of ~2.
View Article and Find Full Text PDFAdv Sci (Weinh)
January 2025
Faculty of Materials Science and Engineering, Kunming University of Science and Technology, Kunming, 650093, P. R. China.
Designing and optimizing photocatalysts to maximize the use of sunlight and achieve fast charge transport remains a goal of photocatalysis technology. Herein, a full-spectrum-response BiOBr:Er@BiO core-shell S-scheme heterojunction is designed with [Bi─O] tetrahedral sharing using upconversion (UC) functionality, photothermal effects, and interfacial engineering. The UC function of Er and plasmon resonance effect of BiO greatly improves the utilization of sunlight.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!