Polyether polyols are often used in formulated systems, but their complete characterization is challenging, because of simultaneous heterogeneities in chemical composition, molecular weight and functionality. One-dimensional liquid chromatography-mass spectrometry is commonly used to characterize polyether polyols. However, the separation power of this technique is not sufficient to resolve the complexity of such samples entirely. In this study, comprehensive two-dimensional liquid chromatography hyphenated with high-resolution mass spectrometry (LC × LC-HRMS) was used for the characterization of (i) castor oil ethoxylates (COEs) reacted with different mole equivalents of ethylene oxide and (ii) a blended formulation consisting of glycerol ethoxylate, glycerol propoxylate and glycerol ethoxylate-random-propoxylate copolymers. Retention in the first (hydrophilic-interaction-chromatography) dimension was mainly governed by degree of ethoxylation, while the second reversed-phase dimension resolved the samples based on degree of propoxylation (blended formulation) or alkyl chain length (COEs). For different COE samples, we observed the separation of isomer distributions of various di-, tri- and tetra-esters, and such positional isomers were studied by tandem mass spectrometry (LC-MS/MS). This revealed characteristic fragmentation patterns, which allowed discrimination of the isomers based on terminal or internal positioning of the fatty-acid moieties and provided insight in the LC × LC retention behavior of such species.
Download full-text PDF |
Source |
---|---|
http://dx.doi.org/10.1016/j.chroma.2018.07.054 | DOI Listing |
Gels
December 2024
School of Energy and Building Environment, Guilin University of Aerospace Technology, Guilin 541004, China.
In this study, a new environmentally friendly and efficient method for recycling and reusing waste polyurethane sheets is proposed. SiO aerogel was prepared using the sol-gel method, and mullite whiskers were introduced to enhance its toughness. The whisker-toughened aerogel was used in the degradation of waste polyurethane to produce modified recycled polyol, which was subsequently used to prepare recycled polyurethane foam insulation material.
View Article and Find Full Text PDFACS Appl Mater Interfaces
December 2024
Polymer Performance Materials Group, Department of Chemical Engineering and Chemistry, Eindhoven University of Technology, 5600 MB Eindhoven, The Netherlands.
Traditional adhesives often result in irreversible bonds, hindering disassembly and recycling processes. In response to the growing demand for sustainable practices, researchers have explored alternative bonding solutions. Debonding-on-demand adhesives represent a breakthrough, enabling selective weakening or breaking of adhesive bonds when desired and facilitating efficient disassembly, repair, and recycling of bonded materials.
View Article and Find Full Text PDFPolymers (Basel)
November 2024
INESCOP Footwear Technology Centre, Alemania 102, 03600 Elda, Alicante, Spain.
This study aimed to enhance the initial adhesion performance of reactive polyurethane hot-melt adhesives by using a bio-based polycarbonate polyol instead of traditional polyester or polyether polyols and by incorporating thermoplastic polyurethane (TPU) in varied proportions. Adhesives synthesized from bio-based polycarbonate polyols and polypropylene glycol with MDI as the isocyanate were characterized chemically, thermally, and mechanically (FTIR, DSC, plate-plate rheology, DMA, and T-peel strength test). Adding 10-15 wt.
View Article and Find Full Text PDFInt J Mol Sci
October 2024
A.V. Topchiev Institute of Petrochemical Synthesis RAS, 29 Leninsky Pr., 119991 Moscow, Russia.
Materials (Basel)
August 2024
Department of Geology, College of Resources and Civil Engineering, Northeastern University, Shenyang 110819, China.
With the increasing drilling depth of mines, the cross-complexity of fissures in the rock body, and the frequent occurrence of sudden water surges, polymer slurry, with its advantages of good permeability and strong water plugging, is increasingly used in mine grouting projects. Additional research is needed in order to further improve the grouting performance of polymer slurry, ensure the safety of mining operations, and reduce the grouting cost. In this paper, a polymer composite grouting material was prepared with diphenyl methyl diisocyanate, polyether polyol, and fly ash, as the main raw materials, with coupling agent and catalyst as auxiliary reagents.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!