AI Article Synopsis
Article Abstract
Choline phosphate (CP) is a phosphobetaine-type zwitterionic functional group, referred to as inverse phosphorylcholine (PC) due to the reverse orientation of a positively charged quaternary amine and anionic phosphate in contrast to PC lipids in nature. The A unique dipole paring between CP and PC groups has attracted much attention in the biointerface research field. Herein, to evaluate the molecular interaction between the CP and PC groups in water, force-distance curve measurements using scanning probe microscopy (SPM) with a PC-group-functionalized cantilever was carried out on the surface of polymer brushes bearing the CP groups. Three types of methacrylate monomers bearing CP with ethyl (Et), methoxyethyl (MOE), and isopropyl (iPr) phosphates were synthesized in 42-71% yields, and polymerized by surface-initiated atom transfer radical polymerization to form polymer brushes on silicon wafers. The surface free energy of CP-polymer brushes with Et, MOE, and iPr was estimated to be 64.0, 61.4, and 57.4 mN m, respectively, based on contact angle measurements. Force-distance curve measurements of polymer brushes having a CP group was conducted in water at 25 °C by SPM using a spherical probe produced by attaching a silica particle (SiP; d = 25 μm) covered with PC or CP groups to a tipless cantilever. Adhesion force larger than 14 nN was observed between the CP-polymer brushes and PC-SiP, whereas PC-polymer brushes revealed extremely low adhesion force of less than 0.6 nN with PC-SiP and propylsilane-modified SiP. The specific attractive molecular interaction between CP and PC groups was quantitatively evaluated.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1021/acs.langmuir.8b01764 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Polymer Brush-Functionalized MoS as a Water-Based Lubricant Additive.
Macromol Rapid Commun
December 2024
State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences, Lanzhou, 730000, China.
Water-based lubricants have the advantages of low cost, easy cleaning, and environmental friendliness, and are suitable for various lubrication applications. However, the limited tribological properties of pure water-based lubricants restrict their use. To improve these properties, water-based lubrication additives can be employed.
View Article and Find Full Text PDFOptical fibre long-period grating sensors modified with antifouling bio-functional nano-brushes.
Biomater Sci
December 2024
FZU - Institute of Physics, Czech Academy of Sciences, Na Slovance 2, Prague 182 00, Czechia.
Recent advances in optical sensing technologies underpin the development of high-performance, surface-sensitive analytical tools capable of reliable and precise detection of molecular targets in complex biological media in non-laboratory settings. Optical fibre sensors guide light to and from a region of interest, enabling sensitive measurements of localized environments. This positions optical fibre sensors as a highly promising technology for a wide range of biochemical and healthcare applications.
View Article and Find Full Text PDF[Development of Biological Microchips on an Aluminum Support with Cells Made of Brush Polymers].
Mol Biol (Mosk)
December 2024
Engelhardt Institute of Molecular Biology, Russian Academy of Sciences, Moscow, 119991 Russia.
A method has been developed for manufacturing biological microchips on an aluminum substrate with hydrophilic cells from brush copolymers with the formation of a matrix of cells using photolithography. The surface of aluminum substrates was previously coated with a thin, durable, moderately hydrophobic layer of cross-linked polymer to prevent contact with the aluminum surface of the components used in the analysis of nucleic acids. Aluminum biochip substrates have high thermal conductivity and low heat capacity, which is important for the development of methods for multiplex PCR analysis on a chip.
View Article and Find Full Text PDFInvestigating the impact of whitening toothpastes on bioactive resin-based restorative materials: a comparative analysis.
BMC Oral Health
December 2024
Department of Restorative Dentistry, Faculty of Dentistry, King Abdulaziz University, Jeddah, Saudi Arabia.
Objective: To assess the color stability and surface roughness of bioactive resin-based composite following exposure to coffee staining and brushing with whitening toothpastes.
Methods: Disk-shaped specimens of Filtek Z250 (FZ), Beautifil Flow Plus (BFP), Activa Presto (AP), and Fuji II LC (FII) were stained with coffee and then brushed with one of three toothpastes, conventional (C-TP), non-peroxide whitening (W-TP) or hydrogen peroxide-containing whitening toothpaste (HPW-TP) for 10 000 cycles. Changes in color (ΔE) and surface roughness were measured.
Recent Progress in Block Copolymer Self-Assembly for the Fabrication of Structural Color Pigments.
Macromol Rapid Commun
December 2024
Institute of new structural materials, School of Materials Science and Engineering, and Key Laboratory of Polymer Chemistry and Physics of Ministry of Education, Beijing, 100871, P. R. China.
The self-assembly of block copolymers (BCPs) into photonic materials has garnered increasing interest due to the versatility and ease of fabrication offered by the synthesized building blocks. BCPs are highly tunable, with their self-assembled structures' size being adjustable by modifying the block lengths, molecular weight(M), and polymer composition. This review provides a concise summary of the use of BCPs as photonic pigments, which generate color through structural manipulation rather than relying on chemical pigmentation.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!