Computer-aided design-based guided endodontic: A novel approach for root canal access cavity preparation.

In cases of teeth with unusual morphology like calcified pulp canal, guided endodontic treatment is suggested. An endodontic guide which navigates burs according to a preplanned path is used. Existing approaches of endodontic guide design are based on visual observation and analysis of tomographic scan of teeth. Hence, they are time-consuming and expert-dependent. Computer-aided design-based methodology was employed to design and fabricate a customized endodontic guide. A cone beam computed tomographic scan with MIMICS software was used to create a solid model of the teeth. The solid model generated was sliced through the developed program in MATLAB. The geometric centers of consecutive slices were joined to plot the root canals central axis. To gauge the optimum bur angulation for guide design, a straight line fitted in the data set of the geometric center helped create minimally invasive access. Methodology involved simulated verification of the drill path to judge the accuracy and feasibility of root canal access cavity preparation. Next, endodontic guides for extracted teeth were designed and fabricated using a three-dimensional printer, followed by guided root canal access cavity preparation for extracted teeth. To validate the proposed methodology, using a MATLAB image processing tool box, the deviation between the prepared root canal access cavity axis and root canal axis was analyzed in radiographs of post-treated teeth. The deviation between the tool path axis and root canal axis in simulated root canals was found to be not more than 0.210 ± 0.04 mm. The deviation between the axis of the planned root canal access cavity and the prepared root canal access cavity was 0.07 ± 0.02 mm. The proposed method reveals encouraging results for endodontic guide design.