With a remarkably higher theoretical energy density compared to lithium-ion batteries (LIBs) and abundance of elemental sulfur, lithium sulfur (Li-S) batteries have emerged as one of the most promising alternatives among all the post LIB technologies. In particular, the coupling of solid polymer electrolytes (SPEs) with the cell chemistry of Li-S batteries enables a safe and high-capacity electrochemical energy storage system, due to the better processability and less flammability of SPEs compared to liquid electrolytes. However, the practical deployment of all solid-state Li-S batteries (ASSLSBs) containing SPEs is largely hindered by the low accessibility of active materials and side reactions of soluble polysulfide species, resulting in a poor specific capacity and cyclability. In the present work, an ultrahigh performance of ASSLSBs is obtained via an anomalous synergistic effect between (fluorosulfonyl)(trifluoromethanesulfonyl)imide anions inherited from the design of lithium salts in SPEs and the polysulfide species formed during the cycling. The corresponding Li-S cells deliver high specific/areal capacity (1394 mAh g, 1.2 mAh cm), good Coulombic efficiency, and superior rate capability (∼800 mAh g after 60 cycles). These results imply the importance of the molecular structure of lithium salts in ASSLSBs and pave a way for future development of safe and cost-effective Li-S batteries.
Download full-text PDF |
Source |
---|---|
http://dx.doi.org/10.1021/jacs.8b04612 | DOI Listing |
Chem Sci
January 2025
School of Materials and Energy, University of Electronic Science and Technology of China Chengdu 611731 China
Silicon (Si) is considered a promising anode material for next-generation lithium-ion batteries due to its high theoretical specific capacity and earth-abundancy. However, challenges such as significant volume expansion, unstable solid electrolyte interphase (SEI) formation in incompatible electrolytes, and slow lithium-ion transport lead to its poor cycling and rate performance. In this work, it is demonstrated that superior cyclability and rate capability of Si anodes can be achieved using ethyl fluoroacetate (EFA) and fluoroethylene carbonate (FEC) solvents with low binding energy with Li but with sufficiently high relative dielectric constants.
View Article and Find Full Text PDFACS Appl Mater Interfaces
January 2025
Department of Chemical Engineering, Stanford University, Stanford, California 94305, United States.
Lithium-sulfur (Li-S) batteries, with their superior energy densities, are emerging as promising successors to conventional lithium-ion batteries. However, their widespread adoption is hindered by challenges such as the shuttle effect of polysulfides, which affects discharge capacity and cycling stability. This study explores the transformative potential of atomic layer deposition (ALD) of AlO on commercial PP/PE/PP separators (Celgard), combined with the use of UV ozone exposure to enhance ALD nucleation on the separator surface, to address these challenges.
View Article and Find Full Text PDFLangmuir
January 2025
College of Materials and Metallurgy, Guizhou University, Guiyang 550025, China.
Lithium-sulfur (Li-S) batteries hold significant promise due to high energy density, cost-effectiveness, and ecological sustainability, but their practical applications are constrained by suboptimal electrochemical performance and the detrimental shuttle effect. Herein, a porous, sandwich-structured composite was developed to function as a freestanding cathode designed for Li-S batteries without aluminum foil. Porous carbon nanofibers (PCNF) were employed as the conductive matrix for sulfur, with tungsten carbide (WC) being incorporated to furnish abundant active sites for polysulfide adsorption.
View Article and Find Full Text PDFCommun Chem
January 2025
Graduate School of Natural Science and Technology, Shimane University, Nishikawatsu-cho, Matsue, Shimane, Japan.
All-solid-state (ASS) batteries are a promising solution to achieve carbon neutrality. ASS lithium-sulfur (Li-S) batteries stand out due to their improved safety, achieved by replacing organic solvents, which are prone to leakage and fire, with solid electrolytes. In addition, these batteries offer the benefits of higher capacity and the absence of rare metals.
View Article and Find Full Text PDFChem Commun (Camb)
January 2025
Key Laboratory of Functional Molecular Solids, Ministry of Education, College of Chemistry and Materials Science, Anhui Normal University, Wuhu, Anhui 241002, P. R. China.
The shuttle effect of lithium polysulfides and non-ideal reaction kinetics restrict the development of high-energy-density lithium-sulfur (Li-S) batteries. Here, we report a graphene quantum dot (GQD)-modified CoO/NiCoO yolk-shell polyhedron as a sulfur host for Li-S batteries. GQDs shorten transport pathways of electrons, while strong binding of CoO and NiCoO to LiS, LiS and LiS are demonstrated from density functional theory calculations.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!