Nicotine replacement therapy in the form of transdermal nicotine patches and nicotine gums combined with behavioral counseling still has a low smoking cessation rate of 25%. A promising approach to smoking cessation is to remotely program variable transdermal nicotine delivery rates, with inputs from counselor and patient through a smartphone counseling application. A switchable carbon nanotube (CNT) membrane device has been developed for transdermal nicotine delivery that can be programmed to deliver variable doses matching those of nicotine patches (7, 14 and 21 mg/24 h) and nicotine gums (2 mg /4 mg). The performance of switchable devices was evaluated in vitro on flow-cell geometry and in vivo on the skin of hairless guinea pig (HGP). In vitro, CNT membrane devices successfully switched between therapeutically useful nicotine fluxes of 1.3-1.8 μmoles/cm/h (ON, -1.5 V) and 0.17-0.23 μmoles/cm/h (OFF, 0 V), corresponded to the higher doses of gum and nicotine patch fluxes. In vivo, a microdialysis membrane probe was implanted in skin of HGP to directly detect nicotine fluxes through the skin barriers into dialysate with high temporal resolution. The CNT membrane device on HGP skin resulted in an ON/OFF nicotine flux ratio 6.4 ± 2.5 as detected in microdialysis membrane probe in skin. Compared to commercial nicotine patches, the device in ON state was approximately 2-2.4 times the commercial nicotine patch dose as measured by dialysate nicotine fluxes. These results enable smartphone-controlled, battery operated transdermal delivery devices that can be coupled to remote counseling apps for personalized smoking cessation therapy.
Download full-text PDF |
Source |
---|---|
http://dx.doi.org/10.1016/j.jconrel.2018.07.003 | DOI Listing |
J Hazard Mater
December 2024
Center for Membrane Separation and Water Science & Technology, College of Chemical Engineering, Zhejiang University of Technology, Hangzhou 310014, China.
Heatable super hydrophobic polyurethane (PU) sponges (S-GNS/CNT/PVA@PU) containing three-dimensional (3D) carbon nano-networks (CNNs) coatings made from two-dimensional (2D) expanded graphite nano-sheets (GNS) bridged by one-dimensional (1D) carbon nano-tubes (CNT) were constructed using polyvinyl alcohol (PVA) as binder, in which light and/or electric energy could be rapidly converted into heat to reduce the viscosity of spilled heavy oils, resulting in greatly increased oil. Their heavy oil recovery rate could reach 792 kg/(m·h) under combined light and Joule heating of 1 sun and 5 V. Surface heat dissipating coefficient Ks, heat dissipating index n, and surface heat absorption capacity Cs were studied relating to sizes and shapes of surface heating fields under varied heating modes.
View Article and Find Full Text PDFMaterials (Basel)
December 2024
National Institute of Materials Physics, Atomistilor Street, No 405 A, 077125 Magurele, Romania.
Nanocomposites based on FeO and carbonaceous nanoparticles (CNPs), including carbon nanotubes (CNTs) and graphene derivatives (graphene oxide (GO) and reduced graphene oxide (RGO)), such as FeO@GO, FeO@RGO, and FeO@CNT, have demonstrated considerable potential in a number of health applications, including tissue regeneration and innovative cancer treatments such as hyperthermia (HT). This is due to their ability to transport drugs and generate localized heat under the influence of an alternating magnetic field on FeO. Despite the promising potential of CNTs and graphene derivatives as drug delivery systems, their use in biological applications is hindered by challenges related to dispersion in physiological media and particle agglomeration.
View Article and Find Full Text PDFWater Res
January 2025
School of Science, RMlT University, Melbourne, VC 3000. Australia.
Electrochemical recovery of zero-valent sulfur (S) from thiourea (TU) wastewater offers a promising waste-to-value strategy that expects to promote the sulfur resource cycle in water treatment but still suffer from electrode poisoning and sulfur over-oxidation. Herein, we designed a metal-free CNT electrochemical membrane for selective oxidation of thiourea and recovery of S. We found that defect sites on the carbon nanotube surface enable direct electron transfer for thiourea oxidation and may form carbon-sulfur bridge bonds, thereby facilitating the generation of S and urea.
View Article and Find Full Text PDFColloids Surf B Biointerfaces
December 2024
Department of Chemical Technologies, Iranian Research Organization for Science and Technology (IROST), Tehran, Iran.
The separation of oil from microalgae aqueous emulsions is a critical step in producing algal-derived biofuels and nutraceuticals. This study presents the development of super hydrophilic and super oleophobic composite membranes to efficiently separate algal oil from oil/water emulsions. Carbon nanotubes (CNTs) were functionalized with polydopamine (PDA), polyethylene glycol (PEG), and titanium dioxide (TiO) nanoparticles and coated onto a mixed cellulose ester (MCE) substrate to fabricate the composite membranes.
View Article and Find Full Text PDFSci Adv
January 2025
National Engineering Laboratory for Modern Silk, College of Textile and Clothing Engineering, Soochow University, Suzhou, Jiangsu 215123, China.
Flexible thermoelectric systems capable of converting human body heat or solar heat into sustainable electricity are crucial for the development of self-powered wearable electronics. However, challenges persist in maintaining a stable temperature gradient and enabling scalable fabrication for their commercialization. Herein, we present a facile approach involving the screen printing of large-scale carbon nanotube (CNT)-based thermoelectric arrays on conventional textile.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!