Enhancement of Dynamic Damping in Eco-Friendly Railway Concrete Sleepers Using Waste-Tyre Crumb Rubber.

Materials (Basel)

Department of Civil Engineering, School of Engineering, University of Birmingham, Birmingham B152TT, UK.

Published: July 2018

There is no doubt that the use of waste rubber in concrete applications is a genius alternative because Styrene is the main component of rubber, which has a strong toxicity and is harmful to humans. Therefore, it will significantly reduce impacts on the environment when waste rubber can be recycled for genuine uses. In this paper, the dynamic properties of high-strength rubberised concrete have been investigated by carrying out various experiments to retain the compressive strength, tensile strength, flexural strength, electrical resistivity, and damping characteristics by replacing fine aggregates with micro-scale crumb rubber. Over 20 variations of concrete mixes have been performed. The experimental results confirm that a decrease in the compressive strength can be expected when the rubber content is increased. The new findings demonstrate that the high-strength concrete can be enhanced by optimal rubber particles in order to improve splitting tensile and flexural strengths, damping properties, and electrical resistivity. It is therefore recommended to consider the use of rubberised concrete (up to 10 wt. % crumb rubber) in designing railway sleepers as this will improve the service life of railway track systems and reduce wastes to the environment.

Download full-text PDF

Source
http://www.ncbi.nlm.nih.gov/pmc/articles/PMC6073355PMC
http://dx.doi.org/10.3390/ma11071169DOI Listing

Publication Analysis

Top Keywords

crumb rubber
12
rubber
8
waste rubber
8
rubberised concrete
8
compressive strength
8
electrical resistivity
8
concrete
6
enhancement dynamic
4
dynamic damping
4
damping eco-friendly
4

Similar Publications

Asphalt modified with treated waste tires has good environmental protection and application value. However, the nano-modification mechanism of crumb rubber (CR) with asphalt is still unclear. This research investigates the mechanism, aging, and interfacial interaction with the aggregate of CR modification asphalt (CRMA).

View Article and Find Full Text PDF

The growing use of artificial turf in place of natural turf in residential, recreational and commercial settings has raised concerns regarding its potential impact on human health. A systematic review of databases revealed 5673 articles of which, 30 were deemed eligible. Those performing total concentration analyses, bioaccessibility analyses or human health risk assessments (HHRAs) of artificial turf fibres or crumb rubber infill were of interest.

View Article and Find Full Text PDF

The significant growth in road infrastructure worldwide over the last decade has resulted in a notable increase in the demand for asphalt binder. However, the utilization of asphalt binder in the road industry poses challenges to environmental sustainability and economic standpoints. The application of vehicular loads and exposure to environmental factors throughout the service life of roads contribute to the deterioration of binder properties, such as hardening and aging, ultimately leading to premature road failure.

View Article and Find Full Text PDF

Performance of Crumb Rubber Tire-Modified Bitumen for Malaysian Climate Regions.

Materials (Basel)

November 2024

Institute of Transportation, Faculty of Civil and Environmental Engineering, TU Wien, Karlsplatz 13/E230, 1040 Vienna, Austria.

Researchers are increasingly concerned about the vast amounts of waste rubber tires produced globally, which contribute significantly to environmental pollution. The potential of incorporating waste rubber tires to modify bitumen has garnered considerable interest. This study assesses pavement design temperatures according to SUPERPAVE standards for representative Malaysian regions.

View Article and Find Full Text PDF
Article Synopsis
  • This study tests composite modification techniques to enhance the performance of recycled asphalt, using high-viscosity agents (HVA) and crumb rubber materials (CRM) combined with styrene-butadiene-styrene (SBS) to create modified asphalt samples.
  • The performance of four types of asphalt mixtures, including virgin and three recycled mixtures with 50% reclaimed asphalt content, was analyzed through various tests, revealing that higher kinematic viscosity leads to increased optimum asphalt content and enhanced adhesion in dry conditions.
  • Results indicate that while SBS-CRM significantly boosts moisture sensitivity and low-temperature cracking resistance compared to other modified asphalts, the choice of modification method should align with climate and loading conditions for optimal performance and sustainability.
View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!